Welding wire 1.2 mm, net weight 12 kg

Boehler SAS 2-IG

Condition: good (used), total length undivided: 3000 mm Bljdpfehwwfxjx Afmep edge heigth: 90 x 90 mm

Condition: excellent (used), Year of construction: 2020, - Siemens Sinumerik 828D control system Blodpfjzcv Riex Afmop - Accessories: Collet chuck Working area Swinging diameter over bed ø250 mm Swinging diameter over cross slide ø85 mm Maximum turning diameter ø85 mm Maximum turning length 225 mm Maximum bar capacity ø25.5 mm Distance between centers (spindle nose – tailstock center) 405 mm Slide travel range Slide travel X 100 mm Slide travel Z 300 mm Main spindle Spindle mounting (centering rim) ø70 h5 Spindle outer diameter at front bearing ø50 mm Main spindle clamping system Hollow cylinder (pneumatic) with draw tube, max. passage ø25.5 mm Max. chuck size ø100 mm Main spindle drive AC motor, power (100%/40% ED) with integrated holding brake for driven tools 3.7 / 5.5 kW Speed range (continuously variable) 60-6300 rpm Max. torque 35 Nm Dimensions Height of the turning axis above the floor 1130 mm Overall height 1820 mm Footprint (without options) 1700 x 1270 mm Weight 1400 kg

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" Bjdpfey S T T Uox Afmjlp *

Condition: used, Year of construction: 1990, grinding length 900 mm grinding width 510 mm Blsdpfx Ajtqqm Aofmop workpiece height 400 mm table surface area 800 x 400 mm longitudinal feed of the table max. 980 mm table speed -stepless- 1 - 35 m/min grinding wheel size 355 x 51 x 127 mm cross feed of the table 460 mm cross feed 1 - 40 mm/Hub vertical feed autom. 0,005 - 0,04 mm/Hub rapid traverse vertical 0,5 m/min grinding spindle speed 1450 U/min grinding spindle drive 5,6 kW table load capacity max. 1000 kg dimensions of machine L x W x H 3,2 x 2,17 x 2,47 m total power requirement 10 kW weight of the machine ca. 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 1,473 mm, table load: 1,350 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Technical Specification Through-spindle Coolant Yes Bsdpfx Aex D Eg Ujfmslp Dimensions Machine Depth 2357 mm

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 60,000 kg, Brand: Bosch Bsdpfxswk Iy He Afmslp Year of manufacture: Unused, 2022/2023 Weight (kg): approx. 60,000 net Number of units in stock: approx. 160,000 Made in China Comments: List available upon request Sales conditions: Smaller quantities possible, contact us for prices

Condition: good (used), Multi-purpose hoist, grab hoist -Load capacity: max. 1200 kg -for: rope Ø 10 mm Blededvnb Hspfx Afmep -Quantity: 1 piece available -Dimensions: 640/150/H370 mm -Weight: 18 kg

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, controller model: na, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis HAAS MIKRON VCE 750 was manufactured in 2000. It features a table surface of 900x350 mm, a spindle speed of 8000 rpm, and a spindle motor power of 7.5 kW. Equipped with a conversational HAAS CNC, electronic handwheel, and a chip conveyor screw type, this vertical machining centre is ideal for detailed and precise machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Bedpoyaitfofx Afmelp • Table surface: 900x350 mm • Table weight: 340 kg • Electronic handwheel • 3-color status light • Chip conveyor: screw type • Programmable coolant nozzle • 4th axis: 360000° Extra Information Full Documentation

Condition: excellent (used), Dugard Eagle 850VMC (ML946E06), Fanuc Oi, 4th Axis & Tailstock, Toolchanger, Year 2011 X / Y / Z travel: 850×520×510mm Table size: 1,000×510mm Max table load: 500kg Spindle taper: BT40 Spindle speed: 80–8,000rpm; Bljdpfowx Hlwsx Afmjp Spindle power: 11kW continuous, 15kW peak Rapid traverse: X30m/min, Y30m/min, Z24m/min; cutting feedrates up to 10000mm/min Machine footprint/weight: approx. 2.30×2.12×2.58m; 5.5tonnes

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, table load: 340 kg, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis HAAS MIKRON VCE 750 was manufactured in 1997. It features a table surface of 900x350 mm, a table capacity of 340 kg, and movements of X 750 mm, Y 410 mm, and Z 500 mm. The spindle operates at 8000 rpm with a power of 7.5 kW. Regular maintenance and recent updates ensure reliability. Consider the opportunity to buy this HAAS MIKRON VCE 750 vertical machining centre. Contact us for more information about this machine. • Table surface: 900 x 350 mm • Condition: regularly maintained; still in operation • 2023 service: new tool change hand gearbox and new tool change magazine Additional equipment Bedjx D Egzopfx Afmslp • 4th axis