Welding wire 1.2 mm weight 7,4 kg

Boehler S-Al Mg 3

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5077883, overall weight: 2,200 kg, pressure (max.): 10 bar, Equipment: type plate available, BOGE SLF101-3 Compressor, No. 5077883 MANUFACTURER: BOGE TYPE: SLF101-1 Serial No.: 5077883 Year: 2014 Power (kW): 90 Capacity (m3/min): 4.94-12.25 Pressure (bar): 10 Operating hours (doc./total): Frequency inverter: yes Built-in dryer: no Heat exchanger: no Cooling (air/water): air Njdsw R A Anspfx Ac Aedb On tank: no Documentation: no Condition: used

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 52/49/H41 mm Ndedpjrhmnwefx Ac Aeb -Weight: 0.4kg/set

Condition: good (used), saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 525 x 5 mm Nodpfovzn T Nex Ac Asdb -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 23 mm -Number of teeth: see photo -Weight: 6 kg

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Dexion Type: Speedlock P90 Included in the scope of delivery: 01x Pallet racking crossbeam, used Nedpfsi E Thxsx Ac Aodb Material color: sendzimir galvanized Crossbeam type: SLI 120|14 S 350 I-profile: 120 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,000 mm Max. load per crossbeam pair: 1,800 kg, with evenly distributed load The shelf load capacities apply only in conjunction with the P90/20 support. In addition, depending on the field load and the insertion height, the load-bearing capacity of the hook must be checked. 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out.

Condition: used, Year of construction: 2002, operating hours: 36,000 h, total length: 2,350 mm, total width: 1,320 mm, Boge S 101 Screw Compressor Ndodoxfwrxepfx Ac Aob Year of manufacture: 2002 Volume flow: 13.1 m3/min Operating pressure: 8 bar Motor speed: 3000/min Motor power: 75 + 2.2 kW Operating hours: approx. 36,000 h

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Nedpfxjvzmnfo Ac Aodb -Saw blade: Ø 870 x 6 mm -Inside: Ø: 80 mm -Hole circle: Ø 160 x 27 mm / Ø 120 x 21 mm -Number of teeth: see photo -Weight: 30 kg

Condition: good (used), servo motor, electric motor, DC motor, stepper motor, stepping motor Nodpfx Acsg Avp As Aedb -Axis drive bending machine Hämmerle AP100 -max. speed: 4000 rpm -Shaft: Ø 15 mm -Design: B14 -Quantity: 1 piece -Dimensions: 280/180/180 mm -Weight: 7.2 kg

Condition: new, Year of construction: 2026, Power 5.5 kW / 6.6 kW Inverter yes Motor speed 4500 rpm Voltage and frequency: 400V / 50Hz Tank: 200 liters Water resistance: IP23 Ndjdpfx Acjzr Nauo Aob Noise level: 75 dB Working pressure: 10 bar Air flow: 640 l/min Suction capacity: 750 l/min Discharge capacity: 640 l/min Drive type: Direct drive Outlet diameter: G 3/4″ Dryer: None Air-to-oil cooler Screw manufacturer: BAOSI Inverter: GD300-01A Display: HTK070 / MAM6070 Dimensions (length/width/height): 1446 × 506 × 1096 mm Packaged dimensions (length/width/height): 1385 × 520 × 1200 mm Weight 180 kg / 200 kg

Condition: new, Year of construction: 2026, Maximum cutting diameter 400 mm Maximum rectangular cross-section 400 × 400 mm Band dimensions 3860 × 34 × 1.1 mm Band speed 27 / 45 / 69 m/min Speed ​​regulation Stepless (3 ranges) Power supply 400 V Main motor power 4 kW Drive type Mechanical transmission + hydraulic system Machine type Automatic band saw Design Column-type Vise Hydraulic Nsdpfx Acezr I T Hj Aedb Material feed Automatic, hydraulic Control Automatic (battery mode) Feeding accuracy ±0.20 mm Cooling Coolant system (flood) Belt cleaning Wire brush Machine dimensions (L × W × H) 2400 × 2380 × 1800 mm Net weight 2100 kg Gross weight 2300 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H50 mm Nodpfxot Acwbe Ac Ajdb -Total weight: 1.2 kg