SEGATRICE SEMIAUTOMATICA

BIANCO BTM 100,60 DX-SX

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Completely overhauled. New Guides, vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Prodpfxot Uucao Adzja Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Prsdpetu U Ebsfx Adzja

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Pjdpfeyidvdjx Adzsra Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 145 mm, cutting width (max.): 510 mm, overall weight: 400 kg, extraction nozzle diameter: 150 mm, rotational speed (min.): 2,800 rpm, power: 5.5 kW (7.48 HP), STROMAB PS 50/F pendulum cross-cut saw, brand NEW Psdpfordwm Tjx Adzsra Specification: • condition - new • engine power - 5.5 kW • blade diameter - 500 mm • engine shaft diameter - 30 mm • engine speed - 2,800 rpm • max cutting width - 510 mm • max cutting height - 145 mm • additional extension tables - 2 x 2 m • weight 400 kg • 2024/2025 year of manufacture • noise emission - 85.5 dB (A) • the machine meets CE standards Additional information: • tables visible in the photos included with the machine (2 x 2.0 m) • available within 7-10 working days • the price does not include VAT and transport costs

Condition: good (used), Manufacturer CLEARING Model S4-900-180 Condition Used Stock No.0274 Thrust: 900 ton. Thrust points No. 4 Plunger Slide stroke 940 mm. Slide adjustment 762 mm. Number of strokes/min No. 16 Mold clearance at PMI 1,412 mm. Slide size 4,572 mm. x 2,438 mm. Prodetzy R Nepfx Adzea Table size 4,572 mm. x 2,130 mm, Pull-out carriage Present Useful front passage 4,622 mm. Side passage in the shoulder 1,400 mm. Hydraulic Safety Present Cushion in the Basement Present Bottom plate press stroke 280 mm.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 155-11000, Year of construction: 2021, We offer this Stratasys Fortus 450mc 3D printer in excellent condition, year of manufacture 2021. Psdpsym Dl Nofx Adzora If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Pjdpfx Adsxpwf Tszora Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Condition: used, Year of construction: 2004, machine/vehicle number: SA/005006, SECOND HAND WIDE BELT SANDER WITH 3 BELTS DMC MOD. UNISAND USK 1350 M3 Podpjwrnmpofx Adzjra - Steel roller - Rubber roller - Rubber roller - N. 3 indipendent motors - Working width 1350 mm - Device for short pieces - Touch screen control - S/N SA/005006 - Year 2004 - CE rules

Condition: new, Year of construction: 2026, Zero mistakes, zero waste, and higher productivity! We thought SalvaStop_100 as a fundamental component to give your work an edge. Through numerical control, this electronic stop manages the push, stop and positioning of the profiles to be cut, regardless of the material. So you can reduce human errors, avoid waste and decrease labor costs. SalvaStop_100 is integrated with exclusive software that is easy to use thanks to an immediate, easily understandable and complete graphic interface. You can have the SalvaStop stop alone or combined with one of our Legend crosscutting saws to improve performance, work in complete safety and minimize human error. Prodpfx Adjkzhb Ujzja

Year of construction: 2022, condition: like new (used), Circular Saw OMRM 105 Technical Specifications: • Automatic cutting of PVC profiles for glazing beads at 45° • 4 cutting saw blades • Vertical pneumatic clamping system • Adjustment handle for easy mould adaptation Prjdjw D Dq Uopfx Adzoa • Double cutting of glazing bead at 45° in one single operation • Adjustable cutting speed via regulator on the control panel • Standard equipment includes feeding and measuring conveyors (2.5 m + 2.4 m)