Injection molding machine

BATTENFELD HM300/1300

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Gtsdpfxon Tpmuo Admjt

Condition: excellent (used), Year of construction: 2016, operating hours: 23,170 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection pressure: 2,005 bar, injection weight: 618 g, mold height (min.): 330 mm, Injection molding machine Krauss Maffei 250-1400CX with robot and gas boost (225) Product Code: 225 Availability: In Stock Year of production: 2016 Brand: KRAUSS MAFFEI Technical data Shot Weight: 618 g Injection speed: 848 ccm/s Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Tie bar distance: 630x630 mm Platen size: 1135x1180 mm Mould height min.: 330 mm Total day-light max: 1150 mm Type of controls: MC6 Language: German Power: 70 kW Workinghours: 23170 h Weight: 15000 kg Dimensions: 6,5x2,3x2,3 m Godpfx Adsvtzkfsmstt Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes Gas bottle: Yes Picker or robot: Yes

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor 2 rows stator knives Gtodok Tuxdopfx Admot Inlet cross section approx. 600 x 660 mm Drive motor: 30 kW

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Gedpfsk Rnvmjx Admjtt Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry. Gtedpeud H Dmofx Admet

Condition: excellent (used), Year of construction: 2015, clamping force: 1,300 kN, Arburg 520S 1300-400 (2015) Gtjdpewv Hrxofx Admet Clamping force: 130 t Screw diameter: 40 mm (higly wear resistant) Shot weight: 184 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Min/Max mould height: 350mm Opening stroke: 925mm Shot volume: 201 cm3 Type: Horizontal Drive: Hydraulic (Arburg servohydraulics) Hours: 28.000 hours only! \+ Apex Sprue picker robot 4 free cooling circuits Core pullers: yes

Condition: used, Year of construction: 2017, clamping force: 250 kN, displacement volume: 570 cm³, injection pressure: 2,470 bar, overall weight: 14,500 kg, load hours: 22,900 h, screw conveyor diameter: 55 mm, terms of delivery: FCA Pegnitz delivery time: on request Gtodpfx Asxv D Tkjdmot terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with a built-in 21.5" operator panel with a full-colour touchscreen. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Gtedpfexdd Spox Admot Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force front/back: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Hydraulic oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part removal to the operator’s opposite side Axes: X-axis (from mould): 900 mm, servomotor Y-axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z-axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1000kN, tie bar spacing: 470mm/420mm, platen dimensions X/Y/Z: 680mm/590mm, opening stroke: 500mm, daylight: 750mm, ejector stroke: 150mm, ejector force: 41.2kN. Screw diameter: 40mm, L/D ratio: 22, injection volume: 251cm³, injection weight: approx. 228g, injection pressure: 2100bar, injection stroke: 200mm. Machine dimensions X/Y/Z: approx. 4300mm/1500mm/2000mm, weight: approx. 4600kg. Documentation available. An on-site inspection is possible. Gtjdpfx Aew Duvbedmot

Condition: refurbished (used), Year of construction: 1984, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 954594M02, total width: 80 mm, total length: 2,000 mm, total height: 1,500 mm, overall weight: 40 kg, Equipment: cooling unit, I am selling here a twin-screw extruder (laboratory model) with 2 smoothing rollers, operating manual, lip die for 10 cm wide strips, water bath, etc. Gtodpfx Asxpgyysdmst