Blow molding machine

BATTENFELD FISCHER VK1-1

Condition: ready for operation (used), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei KM 80 C1 Gbsdpfx Aou Ti Srefkjn Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm Godpfolz Rvlsx Afkebn ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Semi-automatic PET bottle blow molding machine Manufacturer: FERENC Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: - Length: 900 mm - Width: 900 mm - Height: 1200 mm Blow molder dimensions: - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Gbsdpfsugu E Rjx Afksn Set weight: 1200 kg Technical condition: used machine

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Year of construction : 2000 Godpfjt Akgwsx Afkebn

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A7X5021000012, number of ink cartridges: 4, color channels: CMYK, resolution (max.): 600 dpi, space requirement width: 330 mm, counter reading (color): 503,000, For sale: a Konica Minolta C71cf roll-to-roll color label printer in good condition. It prints on various materials: vellum, coated paper, PP, PE, wine label stock, and PVC. The printer has only printed about 500 km. Currently connected and operational. Gjdpfjxuid Sjx Afkjbn We can also offer finishing equipment: Scorpio Plus SCR35PI, or Vorey VD320

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Godpfey Diabox Afkebn

Year of construction: 2010, condition: good (used), CNC BIESSE BREMA EKO 902 INSERTS FOR SALE TECHNICAL DETAILS: 3-AXIS C.N.C. MACHINING CENTRE (X-Y-Z) - Integral protection of the operating spindle and the working area on the machine. - Numerical control (control) with BIESSE Works software on Windows. - Vertical positioning of the panels, with N. 2 panel locking clamps. - Panel feed (in X-axis direction, on the lower support with rubber wheels), movement (in X-axis) of the panel/board clamps. DIMENSIONS OF THE PALLETS (WORKING DIMENSIONS): - Length Min mm 160 / Max mm 3200 - Width Min mm 35 / Max mm 900 - Wait Min mm 8 / Max mm 80 WORKING GROUPS: - No. 1 Spindle (electro-spindle) vertical ER32 (KW 4,5) with reversing (up to 18000 RPM). Gsdpfohknbrjx Afkebn - No. 1 Circular saw (for grooves) diameter mm 120 (fixed X axis) - No. 13 Independent vertical spindles for drilling (6 in X-axis + 7 in Y-axis) - Nº 8 Independent horizontal spindles for drilling (3+3 on X axis and 1+1 on Y axis) - Nº 1 Hinge drilling head unit - Total installed power 20 KW AUTOMATIC DOWEL INSERTION GROUP ON BOTH SIDES WITH PRESSURE PUMP TO APPLY THE GLUE.

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Gedpjyhbt Hefx Afkobn Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Godpfowbf U Njx Afksbn

Condition: excellent (used), Brand: DMTG DALIAN Model: CKE 6180 Z Cnc : FAGOR 8055 iT Turning diameter : 800 mm Turning length: 2.000 mm Gjdpfx Aeu U Htcofksbn Center height over bed: 400 mm Face slide travel: 420 mm Longitudinal travel : 1.835 mm Spindle bore: 100 mm Spindle speeds: 40-1000 rpm Feed in X : 0-4000 m/min Feed range Z direction : 0-8000 m/ min Turret : 4 estaciones Chuck diameter 4 jaw: 400 mm Quill stroke: 260 mm Voltage : 400 v Total power requirement: 18,5 kw Machine dimensions : 4.500 x 2.000 x 1.800 mm