Welding smoke extraction

AVA LUCHTTECHNIEK

Condition: new, Year of construction: 2024, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Dusdpog Tdpgofx Afnjn Tilt up to 135° Hand and foot remote control with speed display very robust

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions Dusdpsd Iipmefx Afnon • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy. Dsdpfx Aelxyhfofnoun

Condition: new, Fastech horizontal bandsaw semi-automatic BMSY 360 DGH ECO Round cutting range mm: 360 Flat cutting range mm: 510 x 360 Square Cutting range mm: 360 +30 ° Round cutting range mm: 360 +30 ° Flat Cutting range mm: 440 x 360 +30 ° Square Cutting range mm: 360 +45 ° Round Cutting range mm: 360 +45 ° Flat cutting range mm: 390 x 360 +45 ° Square cutting area mm: 360 Duedpeg Ekttjfx Afnjn +60 ° Round cutting range mm: 200 +60 ° Flat cutting range mm: 200 x 360 +60 ° Square cutting range mm: 200 -30 ° Round cutting range mm: 360 -30 ° Flat cutting range mm: 440 x 360 -30 ° Square cutting range mm: 360 -45 ° Round cutting range mm: 360 -45 ° Flat cutting range mm: 390 x 360 -45 ° Square cutting area mm: 360 -60 ° Round cutting range mm: 260 -60 ° Flat cutting range mm: 260 x 360 -60 ° Square cutting range mm: 260 Engine power main drive kW 3 Hydraulic pump power kW 0,37 Engine power coolant pump kW 0,12 Band speed, infinitely variable: m/min.20 - 100 Saw band dimensions mm: 4800x34x1,1 Working surface height mm: 860 weight kg: 1450 length / depth / height mm: 2650 / 1210 / 1870 Double mitre saw Infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle

Year of construction: 2023, condition: new, Always in stock, as left and right version with motorized cleaning. Riedex DM-200 Motor power 4,0 kW Ready to plug in. Packed on pallet! Ready for shipment. Dujdpfx Afsku Aibsnon Alternatively also available with JET cleaning. Many different designs possible ..... - with rotary valve (if desired with underframe) - with briquetting press etc.

Year of construction: 2021, condition: new, Fastech horizontal band saw BMSO 350 GA Cutting capacity (round) mm: 350 Djdpfjg Ekt Njx Afneun Cutting capacity (rectangular) mm: 400 x 350 Cutting capacity (square) mm: 350 x 350 +30° Round cutting range mm: 320 +30° Flat cutting range mm: 400 x 350 +30° Square cutting range mm: 350 +45 ° round cutting range mm: 320 +45 ° flat cutting range mm: 290 x 300 +45 ° square cutting range mm: 290 x 290 Engine power main drive kW: 2,2 Hydraulic pump power kW: 0,37 Coolant pump power kW: 0,12 Band speed, infinitely variable mm: 20-100 saw band dimensions mm: 4160x34x1,1 working surface height mm: 760 weight kg: 1050 length mm: 2450 depth mm: 920 Height mm: 2020 roller conveyor 1200mm infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Control system

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: Dusdpjrt H Izsfx Afnon a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: good (used), Year of construction: 1997, machine/vehicle number: 16550, Offer 23433 Technical data - Vertical version for filtering welding mist + grinding dust, - Exhaust air can be discharged into the work area or outside - Stationary or semi-mobile installation - Air volume flow up to approx. 500 m³/h - free blowing 860 m³/h - max. vacuum - 26 kPa - Turbine capacity 1050 m³/h - Separation according to filter category M > 99 % - Filter area 3.4 m² - Automatic filter cleaning by counter-air flow during suction operation - Dust collection container - Compressed air connection 3 l/day Duedpfx Asrl Iwzofnon - Connection pipe inlet + outlet each 100 mm - Silencer - Connection 400 V / 13 kW - Space requirement approx. W 1200 x H 2000 x D 700 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7532000080, Offer 25092 Technical specifications: - Working width 3500 mm - Pressure capacity 160 t - Clearance between columns 3100 mm - Table width 405 mm - Throat depth 260 mm - Installation height approx. 240 mm - Ram stroke 180 mm - Working height approx. 870 mm - Motor power approx. 15 kW - Oil capacity approx. 300 l - Space required approx. W 3800 x H 2750 x D 2100 mm - Weight approx. 11500 kg - With: - Swivel arm - Control panel with CYBELEC CNC control - Y 1 + 2 ; X ; Z Duodpfx Afov Tli Esnen - Motorized backgauge up to 620 mm - Manual crowning WILA - 4-way universal die + pointing tool - Two-hand control panel with foot switch - Support arms

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, pipe diameter (max.): 240 mm, workpiece weight (max.): 500 kg, total length: 14,000 mm, total width: 2,000 mm, total height: 3,000 mm, working range: 6,500 mm, Equipment: cooling unit, documentation/manual, Tube Cutting Machine DNE - Member of Bystronic group The fiber laser tube cutting machine DNE LASER D-TUBE F is an innovative product specifically developed for the profile and tube cutting market. It features precise control of tube support devices and chucks, offering exceptional performance. The machine is versatile in cutting materials and types, covering a wide range of applications, including carbon steel, stainless steel, aluminum alloys, and more. It can process different profiles such as round tubes, square tubes, U-channels, I-beams, and custom-shaped tubes for cutting, drilling, and contour cutting. It is a highly automated, efficient, and cost-effective tube cutting system. Description Laser power: 6000 watts Round tube: 15 - 240 mm Square tube: 15 x 15 - 240 x 240 mm Rectangular tube: 15 x 15 - 230 x 230 mm Max. positioning accuracy X,Y-axis: 0.05/1000 mm Max. positioning accuracy U-axis: 0.05/1000 mm Max. tube weight: 40 kg/m Max. tube weight: 500 kg Length: 14000 mm Width: 2000 mm Dusdewnbhropfx Afnen Height: 3000 mm 40° cutting head Bevelcut Semi-automatic loading Exhaust system 7.5 kW Nesting software