Joinery

AUERTECH Blockhausfräse BL100A, Bj.2006

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length Kodpeu Uh T Djfx Adhsnd - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Kodjvwfqqopfx Adhend

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. Knsdpfx Aetrl R Aedhjd O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Drying chamber Make: Mühlböck Type: ZLSM Year of construction: 2003 Knsdpfjwr Tzfjx Adhed Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans each 3 kW 10 measuring points With frequency converter With control system Heating power 223 kW Water temperature 85 °C Water quantity 14 m³/h Voltage 230/400 Volt Connected load 12 kW Fans 3 x 3 kW Control program MB Intellevent 5000

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023, delivered in 2024 Condition: as new, machine is in original packaging and has not been commissioned Equipment and technical data: Infeed Table / Cross Conveyor: - Number of strands: 6 × Supergrip timing belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m Knsdpoxavtkjfx Adhod - Drive: geared motor, 1.5 kW - Minimum workpiece infeed length: 0.8 m - Function: Automatic transfer of raw material by lowering level to the infeed table Infeed Table: - Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the machining zone - Support width: approx. 200 mm BLOCKHAUS 4F-SERVO (main milling unit): - Machining dimensions: 140 × 200 mm - Maximum horizontal milling depth top: 60 mm - Maximum horizontal milling depth bottom: 35 mm - Maximum vertical milling depth: 95 mm - Milling spindles: Ø 30 mm - Horizontal milling tools: 2 × D = 220 mm × W = 120 mm - Vertical milling tools: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical via SERVODRIVE, infinitely variable via software - Milling depth adjustment: spindle with digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: below-floor hopper Ø 160 mm (pit by customer required) - Control: IPC / PLC / IITO software - Machine frame prepped for end tenon or dovetail milling, drilling unit and crosscut saw - Machine enclosure: fully closed, with swiveling safety hood (gas strut, viewing window) - Electrical control cabinet on base, cable carrier 3.0 m Option i (automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of the 4F tools - Control via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended machining capabilities: - individual grooves and millings on four component sides, - recesses and markings for window and door openings, - double and triple joints, - half corner joints (e.g. for top and bottom log beams) Tools: - 2 × 3-piece groove cutter D 220 mm, width 21–65 mm, LM - 2 × 3-piece groove cutter D 280 mm, width 21–65 mm, LM - 1 × end tenon cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Combination End Tenon & Dovetail Milling Unit: - 3-axis milling unit for production of end tenons and dovetail joints - End tenon cutter Ø 240 mm × width 30 mm - Max. milling depth for end tenon: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y axis): SERVODRIVE, infinitely variable - Height adjustment (DT.Z axis): SERVODRIVE - Rotation adjustment (DT.R axis): SERVODRIVE - Workpiece clamping device: vertical pneumatic - Minimum beam thickness for longitudinal connection: 80 mm - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included in delivery - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, infinitely variable - Height adjustment (Z axis): SERVODRIVE, digital counter - Workpiece clamping device: vertical pneumatic

Condition: new, Year of construction: 2025, warranty duration: 12 months, cutting height (max.): 120 mm, cutting width (max.): 200 mm, power: 16 kW (21.75 HP), Equipment: rotational speed infinitely variable, Machine for processing components for modern log house construction with the perfect price-performance ratio for beginners, small productions, or as a supplement for special parts. Loading and positioning of the components is done manually – after starting the processing unit with the 2-hand buttons, the milling process runs automatically. Optional rolling tables and positioning stops are available for positioning the components. Knsdpfx Adewnt Htohod

Condition: used, Max. Length: 6000 mm Width: 1300 mm complete with gluing machine Kodpewf Hivofx Adhsnd

Condition: used, VERTICAL CLAMP HYDRAULIC PRESS FOR SOLID WOOD PANELS TRIMWEX Knsdpfx Ajwr A U Ujdhod - Working dimensions 6100x1300 mm - Working thickness 180 mm - N. 11 vertical cylinders - N. 8 horizontal cylinders

Condition: as good as new (ex-display), lifting height: 5,700 mm, Year of construction: 2025, Weights Empty weight: 800 kg Functional Mast length: 440 cm Length of jib: 1 m Lifting capacity: 800 kg CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Knedextaybjpfx Adhed Other information Tyre brand: Rupsen Maximum lifting capacity at end of jib: 130 kg Hook height horizontal jib: 460 cm Hook height luffed jib: 560 cm Delivery terms: EXW Transport dimensions (LxWxH): 0,0017x0,0007x0,00136 Rental currency: EUR Production country: NL Min boom length: 100 cm Additional information Please contact Sales Department for more information

Condition: excellent (used), Max working width 9000 mm Max working height 1100 mm Kodpsxnwpiefx Adhond 6 upper pressing sections, each 1520 mm 18 front clamps Overall width 13000 mm Overall height 2200 mm