Used Auertech Joinery for sale (154)

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical data: - Log house milling machine BL100A - four-head unit - For producing chalet corner joints by milling on four sides of the log plank in a single clamping, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle, digital counter - Workpiece clamping device: 2 × vertical, pneumatic - Extraction: underfloor funnel, Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine base: prepared for end groove unit, drilling device, and cross-cut saw - Machine enclosure: closed design, hinged safety cover (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable sleeve - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 units - Activation: pneumatic, front-mounted - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutters - Horizontal drilling device integrated, with drill guide and chip guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatically, steplessly adjustable, with rapid traverse for idle stroke - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table cross-cut circular saw integrated (automatic mode only) - Maximum cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: suction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics, and electrics for end groove mill - Interface: electric, for actuation via external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Hsdpfx Asyxyanoagjfg Location: Röllbach

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. Hodpfxsy Sgx Rs Aagjfg MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m Hfsdexxhwlopfx Aagsg • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation • Price & delivery time on request. Subject to prior sale and all rights reserved

Condition: new, Year of construction: 2025, warranty duration: 12 months, cutting height (max.): 120 mm, cutting width (max.): 200 mm, power: 16 kW (21.75 HP), Equipment: rotational speed infinitely variable, Machine for processing components for modern log house construction with the perfect price-performance ratio for beginners, small productions, or as a supplement for special parts. Loading and positioning of the components is done manually – after starting the processing unit with the 2-hand buttons, the milling process runs automatically. Optional rolling tables and positioning stops are available for positioning the components. Hedpswnt Htjfx Aagjfg

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 11599, total length: 2,742 mm, cutting width (max.): 450 mm, overall weight: 18,000 kg, type of input current: three-phase, Equipment: safety light barrier, For sale is a used, fully functional Hundegger K2 5-axis joinery line 450, year of manufacture 2005. Machine features: - Infeed and loading cross conveyor for 13 m timber length - Underslung swiveling crosscut saw - Universal milling unit (UF5) with finger-joint cutter and standard cutter, provision for retrofitting a second universal unit (UF-4) - Combined support for vertically operating tools: 2 drilling units 2.2 kW each, 2 vertical finger-joint milling units - Combined support for horizontally operating tools: 2 drilling units 2.2 kW each, 1 slotting unit (630x50mm), marking devices front and rear, longitudinal and cross groove milling units - Refined timber support surface - Fully automatic timber turning station — hydraulic design - Transport and positioning device “two-hand operation” - Electronic control system - Extension roller conveyor for 13 m timber length - Integration with planing machine (top feed roller) - Transfer cross conveyor, width 4.10 m - Planing machine type HMD with 9.2 kW motors, chamfering unit - Storage blocks The machine comes from ongoing production and is in professional use. Inspection possible by arrangement. Drawings/documentation available, further information on request. Hfedoy Ry T Sspfx Aageg Sale as used, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 Hfodjy Ri Huepfx Aagjg - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: excellent (used), CATALOG NO. 6907 TECHNICAL DATA - Top loading hopper inlet: 1980x1050mm - Bottom loading hopper inlet: 980x1050mm - Outlet for shredded wood: Ø210mm - Rotor working width: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife dimension: 40x40mm - Screen: 18mm - Pressure drawer - Electric autoreverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French made – Like WEIMA WL 10 – Fitted with new knives – Autoreverse – Pressure drawer – Very good condition – Used chipper Net price: 82,900 PLN Net price: 19,740 EUR Hodpoy Nz Rpefx Aagofg Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant fluctuations in the exchange rate, the price may change)

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: K2, cutting width (max.): 650 mm, type of input current: three-phase, Equipment: safety light barrier, The machine consists of: - 5-axis milling unit - Saw unit with 700 mm blade - Horizontal drilling unit for beam drilling - Automatic reference marking system for assembly positioning - Circular saw residue extraction system - Automatic loading system - Automatic unloading system - Automatic beam rotation system - Maximum workable dimensions: 640*260*16000 mm The tools included with the machine are: - Universal cutter head 350x100 Hfodpey Ruhdsfx Aagog - Disc cutter 350x40 - End mill 50x200 - End mill 30x230 - Drill bit set for drilling unit - Dovetail cutter for beam joinery The onboard PC has been recently replaced and all regular maintenance has always been performed using original spare parts.

Condition: excellent (used), functionality: fully functional, Essetre beam processing line model Techno PM with 5 axes Spindle 12 kW liquid-cooled, RPM 1,000–18,000 2 automatic tool changers with 9 positions each HSK 63F Processing height 800 mm Processing width 400 mm Hfodpfx Aaew S Naiogeg Machine is connected and ready for demonstration

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, cutting height (max.): 740 mm, power of the milling unit: 5,000 W, cutting width (max.): 650 mm, control cabinet width: 1,500 mm, saw blade diameter: 740 mm, rotational speed (min.): 1,600 rpm, rotational speed (max.): 1,600 rpm, power: 30 kW (40.79 HP), working length: 12,000 mm, working width: 650 mm, type of input current: three-phase, Equipment: safety light barrier, Fezer joinery line Hedpfxeyyx Dnj Aagjfg

Condition: excellent (used), Year of construction: 2010, SAFO Carbon snow line - Year of production: 2000 Semi-automatic Hfjdjulu Udopfx Aagsg -length of the entire line 20 meters -additional set of cutters for processing a profile beam in sections of 30 mm to 50 mm The line is 100% ready for operation

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Hodowuppwopfx Aagjfg Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: excellent (used), Year of construction: 2020, Machines included in the line 1. VANHOLD M 300 tracked multi-blade saw 2. Outfeed belt behind the multi-blade saw 3. Transfer belt to the automatic feeder with knockers 4. VANHOLD Speed Master automatic feeder 5. VANHOLD Powermax 2300_5 four-sided planer Detailed technical specifications of the line – available on request via email. Hodpjw Nhflefx Aagefg The price of the new line is 100,000 euros.

Condition: excellent (used), Year of construction: 2018, The line consists of: - WEINMANN OPTIMAT WTZ 120/12 L assembly table - WEINMANN WMS 150 - WEINMANN OPTIMAT WTW 110/12 N/L loading/unloading table - Schmalz Jumbo Ergo 140 flexible hose vacuum lifter The WMS150 multifunction bridge is a CNC machine for the automated processing of timber structural elements (walls, roofs, and floors). Machine dimensions: - Length (X-axis): approx. 3,000 mm - Width (Y-axis): approx. 6,200 mm - Height (Z-axis): approx. 3,000 mm - Workpiece width: approx. 3,200 mm - Main spindle: 18.5 kW with automatic tool changer - FLEX5 indexing system Tool set for WMS tool changer consisting of: - 3-flute universal roughing cutter - Drilling unit - Saw unit - Marker with ballpoint pen technology HSK - Saw unit NL 55 mm HSK63F - Saw unit NL 105 mm HSK63F Gluing system - Holder for PUR gluing unit - PUR one-component adhesive unit (1K) with 6 application nozzles Fastening and assembly unit - Automatic height adjustment for fastening device - Holder for ADUNOX screwdriving unit - ADUNOX-TRS screwdriving unit Bridge extension Tool holder beam with integrated Y-axis Hfjdpsytyuaofx Aagsg Sliding guide with U-profile for the bridge Increased X-axis drive dynamics Energy supply system via cable drag chain End position monitoring for handling systems Wheel and sliding block lock, right side of portal Homatic powerControl V2.0 control system Remote control for WMS150 with potentiometer Mobile extraction unit 3.0 kW Electrical cabinet cooling unit Less than 1,000 operating hours

Condition: used, Year of construction: 2005, functionality: fully functional, I am offering a rare Hundegger K3 for sale. The machine is operational and can be inspected by appointment. The K3 was manufactured in 2005 and comes with the following equipment: - Infeed and transfer cross conveyor - Offcut holder in front of the saw - Underslung swivel crosscut saw - 5-axis universal milling unit (UF5) - Combination support for vertically operating tools 2 reinforced vertical drilling units - Combination support for horizontally operating tools Slotting unit 1 standard drilling unit 1 drilling unit swiveling at 45 degrees - Fully automatic hydraulic beam turning station - Marking unit on stop side - Marking unit on operator side Hjdpfxoyvplnj Aagsfg - Underside marking device - Additional monitor in the outfeed area - Deposit table for short components - Top feed roller The machine must be dismantled by the buyer. Pickup only from company premises.

Condition: good (used), We have a total of 5 pcs: ABS 600-7,5 KW /R 3 pcs. /L 2 pcs. Hfedpfok Rphqsx Aageg The machine has not worked in Lithuania. You can call or write us. We can speak and write German and Russian. You can also send messages in English. 1.1.

Condition: used, Year of construction: 1997, cutting height (max.): 300 mm, cutting width (max.): 450 mm, saw blade diameter: 800 mm, working width: 450 mm, We are offering this used Hundegger K1-A joinery line, model Hundegger K1, year of manufacture 1997. Type: K1-A Hodpfx Aaeynwx Ejgefg Machine number: 1647 Year: 1997 Equipment includes: - Infeed cross conveyor with flat chain belts - Under-table tilting cross-cut saw, blade diameter 800mm - 4-axis universal milling unit with finger cutter and dovetail cutter Combined support for vertically-operating tools: - Drilling unit - Vertical finger milling unit Combined support for horizontally-operating tools: - Drilling unit - Drilling unit - Slotting unit - Rear marker - Automatic turnover device - Various milling heads Component dimensions from 20x60mm up to 300x450mm. Feel free to contact us with any questions!

Condition: used, SINGLE PARVEAU TENONING MACHINE WITH DIGITAL POSITIONING Hsdpfxev Txrgs Aagofg TYPE 920 WITH 4HP SAW MOTOR 10HP ROUTER WITH 300MM SHAFT 10HP ROUTER WITH 300MM SHAFT

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 4,400 mm, Used CNC joinery machine by HUNDEGGER, model PBA, year of manufacture 2003. It can process element sizes up to 4.40 m width, 16.50 m length, and 240 mm thickness. Pre-cutting of elements is carried out with the 5-axis chainsaw and re-planed with a roller milling cutter. All processing units, except for the 5-axis circular saw retrofitted at the end of 2010, can handle panel thicknesses up to 240 mm. The 5-axis circular saw can cut continuously up to approximately 240 mm panel thickness at standard feed rates. Equipment: - 5-axis chainsaw 15 kW - 5-axis circular saw 11 kW - Vertical milling unit 22 kW - Vertical milling unit 22 kW - Vertical drilling unit 4 kW - Gantry width: 6960 mm - 18 m guide rail Hfsdpfsylxfuex Aagjg - Processing table height: 700 mm - Frequency converter for 35 kW - Without processing table – it can be self-constructed from cross-laminated timber Dismantling and collection to be arranged by the buyer.

Condition: excellent (used), Year of construction: 2008, Hundegger K2i 625x300mm under-table crosscut saw, 11KW saw blade 800mm, universal 5-axis milling unit, combination support for vertically operating tools, combination support for horizontally operating tools, drilling unit 2.2KW (1x vertical 18mm x 460mm and 2x horizontal 7mm/8mm x 650mm). Fully automatic hydraulic beam turning station, K2i transport and positioning device, electronic control system, 6-arm outfeed table, vertical finger joint cutter 5.5 KW, longitudinal and cross groove cutter 15.5–30mm, marking and labeling devices (bottom and rear), refined (chrome-plated) support surfaces, left and right height-adjustable safety guard plate, saw blade 900mm. The system is ready for demonstration. Availability: Autumn 2026. Hfjdpfxeww Nuxs Aagsg

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device Hedpfxsya Dc Ij Aagofg - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: used, The sale is due to insolvency. The entire system was purchased in 2021 and was only in operation for approximately 3 years. Manufacturer: Randek (Sweden) Year of manufacture: 2021 1. Saw Type: SPL 728 X04 Control: Beckhoff, touchscreen Languages: See photos Mitre cuts: 0°–360° Bevel cuts: 90°–28° Max. material thickness: 250 mm Saw blade diameter: 700 mm Power: 7.5 kW 2. Infeed unit with stacking device, right Type: UV130F2X05 Length: 13 m Lifting table: 4,000 kg 3. Outfeed unit with stacking device, left Type: IH106F1X01 Length: 10.60 m Lifting table: 5,500 kg Hfsdpfxoxqpqke Aagog 4. Label printer Brand: ZEBRA Overall system dimensions approx.: Length 24 m x width 3 m

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. Hodpfx Aaexx T Rdjgofg We offer disassembly and installation for €10,000.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,500 kg, SCM M2 18 kW tracked multi-saw Specifications: - condition - used - manufacturer - SCM - model - M2 - track width - 220 mm - max working height - 120 mm - power of main engine 25 HP ( 18 kW ) - discs diameter - 340 mm - spindle fi 40 mm, bushings fi 70 mm - speed control of the caterpillar in the range 6-48 m/min - caterpillar track in very good condition, not worn out - working table 164 x 90 cm - suction nozzle fi 180 mm - weight - about 1500 kg - overall dimensions - 220 x 160 x 140 cm ( W x L x H ) Additional information: - the machine is in good technical condition, ready for immediate use - the pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transportation costs Hodpfjt Rivyox Aagefg Additional photos and video in the link below: drive.google.com/drive/folders/1u41GyV7Exyaj8dfI1m5fPvTzSnMzhRqd ?usp=sharing

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw Hodoyfhi Nspfx Aagefg - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included