HYDRO SAN CTPP 77/380

ATM CTPP 77/380

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Iiedpfx Ashcfzkea Esk Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm Iedpfx Aefx Hv Hoa Ejik hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: new, Universal milling machine Isdpfxjbnfxuo Aa Eeik Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Travels: - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Isdpslc N R Defx Aa Ejik

Condition: used, MULLER 250t PRESSURE: 250t STROKE: 550mm TABLE DIMENSIONS: 2500x1400mm Iodpjrfxhkefx Aa Eeik

Condition: used, Single column eccentric press WEINGARTEN type ERV 40 Machine No. 537 / 65 Year of construction 1965 Compressive force 40 ton. throat 230 mm table size 570 x 470 mm ram surface 250 x 200 mm clamping spigot bore Ø 40 mm installation height max. approx. 520 mm stroke adjustment 8 - 88 mm slide adjustment travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate Isdpfxeffm Hhj Aa Ejik - clutch-brake combination by WEINGARTEN friction thread clutch - electric 2-hand operation and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm weight approx. 2,6 ton.

Condition: used, machine/vehicle number: 12469, Hydraulic press, two-column press, oil hydraulic press -Press force ram: 65 to -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. Insertion height: 295 mm -Max. Width: 300 mm -Max. Stroke: 220 mm -with safety cage -Max. Feed speed: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg Isdpfeb I Dqaox Aa Ejik

Year of construction: 1988, condition: good (used), Force: 160 tons Iisdpfjd Rlm Rox Aa Esk Windows: 600mm Daylight: 750mm Table: 1400x900mm Ram 1400x900mm Speed down 400mm/sec. up 300mm/sec. work 19-50mm/sec. Stroke: 400mm Requested power: 45 KW Weight 23 tons Height: 4300mm Machine is floorstanding Siemens S5 control 3 cushions in bed

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Iisdpfxelc N Rye Aa Eek

Year of construction: 2001, condition: excellent (used), Description Universal CNC Turning Lathe from Bridgeport apply for toolmaker , mold maker, education and Locksmith Turning diameter : 430mm Control : Fanuc 20 T Technical data Ijdpsfglx Rsfx Aa Eeik Turning diameter 430mm Turning lenght 1000mm Control Fanuc 20 T Tailstock MK 4 Tools Multifix Speeds 1-4000U/min Power supply 380V - 7,5 KW Contact person: AWM GmbH Herr Mario Wurm