Injection molding machine

Arburg 520C-2000-800(193)

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Bedjf A Nq Aspfx Aa Iodh Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: like new (used), Year of construction: 2025, container length: 20 ft, color: grey-black, overall weight: 30,480 kg, maximum load weight: 27,380 kg, empty load weight: 3,100 kg, loading space volume: 31 m³, loading space width: 2,350 mm, loading space length: 5,898 mm, loading space height: 2,390 mm, 20' Open Side (Side Door) Shipping Container - Condition: ONE WAY - used once for sea freight with cargo - Exterior color: RAL7016 Anthracite gray - Weatherproof and waterproof - With valid CSC plate (for 5 years) - Cargo worthy - Available from depot in Hamburg / Delivery at extra cost OTHER COLORS: RAL5010 Gentian blue, RAL7035 Light gray CONTAINER CONSTRUCTION: - Double-leaf door with all-round rubber seal on the end face - Fully opening folding door on the long side - 12 x galvanized door locking bars - Walls made of corrugated steel sheet, 2 mm thick - 2x ventilation openings on the side walls - Floor made of coated plywood, 28 mm thick - Forklift pockets / spacing = 2055 mm - Built according to ISO standard CONTAINER DIMENSIONS: - External dimensions (L x W x H): 6,058 x 2,438 x 2,591 mm - Internal dimensions (L x W x H): 5,898 x 2,350 x 2,390 mm - Door opening (W x H): Width: 5,702 mm x Height: 2,154 mm - Volume: 31.1 m³ - Tare weight: 3,100 kg - Payload: 27,380 kg CONTAINER APPLICATIONS: - Additional storage capacity - Storage of materials and tools - Temporary storage during relocation - Transport container - Showrooms - Living container - Recreation rooms - Mobile kitchens + bars - Workshops - Technical rooms - and more OUR SERVICES: - Container sales: All sizes + types / New + used - Europe-wide delivery by truck / side loader / rail / inland vessel - Container repair - Container modification - Accessories + spare parts for containers PAYMENT TERMS: Prepayment: The invoice amount must be fully transferred to the specified bank account before delivery or service provision. The order will be processed after payment is received. Payment by bank transfer: The invoice amounts must be transferred to the specified bank account within 7 days after the invoice date. Payment by PayPal: PayPal payments are possible, subject to an additional PayPal fee of 2.49 percent. Bedpfsgp Alhox Aa Isdh FURTHER INFORMATION: Invoice with VAT shown (19%). The containers are located in an empty depot in the port of Hamburg. We distribute many other new + used containers of all types + sizes. We will gladly create a free, no-obligation quote for containers including delivery and any unloading. CONTACT US: We are always available to answer your questions! Container trade, shipping container, storage container, overseas container, deep-sea container, material container, warehouse container, construction site container, construction container, steel container, bar container, kiosk container, workshop container, event container, relocation container, archive container, freight container

Condition: ready for operation (used), Hello, Bdodpfx Aeiq Iy Iea Ieh we offer used Erowa Powerchuck with pallets. They have been cleaned and checked by us. In addition, a functional test was carried out. The chucks have the usual signs of wear, but are technically in good condition. Individual purchase also possible. Wide range of pallets available. Do you have any questions? Then we are at your disposal. Shipping is possible.

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Bjdpfxsv D Nxlj Aa Isdh Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details Bjderxtpdjpfx Aa Ijdh CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: excellent (used), Year of construction: 2000, Refrigeration equipment Brand: Ers Type: SC 110. V/5 Power: 8 kW Bdsdpfjd I Tlhjx Aa Ijh Year of manufacture: 2000

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Bjdpfjuk I Etox Aa Iedh

Condition: used, Good day, We are offering used clamping devices from Erowa. These are part of the Erowa UPC system and are suitable for die-sinking EDM and milling. The following parts are available: ER-048377 UPC Alignment pallet Bjdpfetk Hakex Aa Ijdh Erowa T-slot pallet 320x320 Base body made of aluminum, bars hardened and ground. ER-016917 UPC Aluminum pallet 320 x 320 x 40 with clamping bar They have been cleaned and checked by us. A functional test was also carried out. The clamping devices have signs of use and are technically in very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 55 mm Shot weight: 434 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 474 cm3 Bjdpfx Asx Ir Ngoa Ijdh Platen dimensions : 795 x 795 mm Working hours: 25.969 h Type: Horizontal Drive: Hydraulic Equipment: 1x core puller Euromap 67

Year of construction: 1999, condition: used, 4 upright fermentation vats with jacket cooling Additional title: vertical, coolable, stainless steel vessels Max. content: 2500 l Length: 1600 mm Bjdoxwy Slopfx Aa Iedh Width: 1600 mm Height: 1717 mm Operation / Control: manual Material: stainless steel 1.4301 Position: free standing Base construction: cylindrical vessel, open at the top, with square tube feet on domes Features: Shell cooling, automatic-valve with temperature control, central bottom outlet with shut-off valve