Injection molding machine

ARBURG 420 C - 1300 350/350

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Nedpsy Snapjfx Amnewg Spritzteilgewicht in PS: 45 g Steuerung: Selogica Ausstattung: .Kernzug -Roboter

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, functionality: fully functional, machine/vehicle number: 184172, clamping force: 1,300 kN, Used injection moulding machine The machine has a complete service history, including all major repairs and component replacements—hoses, etc. Manufacturer: Arburg Model: 420C 1300-350 Year: 2001 Machine no.: 184172 Control: Selogica Operating hours: 56,380 h Continuous maintenance by the manufacturer Clamping Unit Clamping force: 1300 kN / 130 tons Tie bar distance: 420 x 420 mm Platen size: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Mould installation height: 250 mm Maximum platen distance: 750 mm Injection Unit Injection volume: 145 ccm Shot weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras - Hydraulic core pull - Robot interface - Dosing interface - Position-regulated screw - Highly wear-resistant screw cylinder - CF card drive - Extended monitoring: movement monitoring, input monitoring, clamping program, production control, job change, optimisation, freely configurable page, production protocol, setup protocol Nwodpfx Amsvimd Njnjg - Immediately available in our warehouse in Hannover, loaded free onto truck or delivered free within Germany against reimbursement of freight cost - Function-tested (function guaranteed up to initial commissioning)

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Availability: 06/2026 Full technical specifications in the attached document Clamping force: 1300 kN Opening force: 35/350 kN Opening stroke: 500 mm Mould installation height (min): 250 mm Distance between platens (max): 750 mm Nedpeyx D Ngsfx Amnowg Tie bar spacing: 420 x 420 mm Ejector force: 40 kN Ejector stroke: 175 mm Screw stroke: 145 mm Screw diameter: 35 / 40 / 45 mm Injection pressure: 2500 / 2120 / 1670 bar

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Nsdeyddy Ijpfx Amnewg

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Nedjyddzfepfx Amnewg

Condition: excellent (used), Year of construction: 1998, Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General information Product Code: 186 Availability: In Stock Year of production: 1998 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,300 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 420 x 420 mm Nwjdpfxjvnmc Aj Amnog Platen size: 605 x 605 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 88000 h Weight: 4080 kg Dimensions: 4,5 x 2 m Hopper: No Core pull: Yes Euromap: Yes