Injection molding machine

Arburg 370 C 600-100

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 190958, clamping force: 600 kN, overall weight: 2,930 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 11,000 W, For sale: Arburg Allrounder 370C 600-100 injection moulding machine. The machine is in a well-maintained, fully functional condition. Optional accessories are negotiable. Rsdpfx Aajx Utggs Ujp

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Redpfx Ajr Hrqrea Usp Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Year of construction: 2011, condition: good (used), Drying oven, tempering oven Caltherm 200 C For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min number of elements: 12x 3,6kw fan motor: 15kw Total recommended Power supply of plant : 100A Rsdpovu Hvpjfx Aa Uep Type of temperature control: West 6400 external dimensions: width: 430cm length: 330cm height: 300cm weight: ca 4800kg

Condition: good (used), Riello RLS50 oil+gas burner 581kw ca.15kg/h Rodpfjpiqiaex Aa Uop

Condition: used, Year of construction: 1976, turning diameter over bed 600 mm turning diameter over slide rest 400 mm turning length 1000 mm turning diameter in the gap 850 mm turning speeds 15 - 810 U/min centre height 300 mm Rjdpfx Aew Tdxcoa Usp spindle bore 56 mm total power requirement 9,0 KW weight of the machine ca. 2,9 t dimensions of the machine ca. 2,8 x 1,45 x 1,65 m Center lathe - Forkardt 3-jaw chuck F 315 - Single-jaw tool post - Steady rest - Live center - Chuck guard, limit switch monitored - Chip tray

Condition: good (used), Details on request Redpfjfin Rfsx Aa Ujp

Condition: good (used), Year of construction: 2011, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Rsdpfettaytjx Aa Usp Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: used, Hydraulic power unit, hydro power unit with double pump, tandem pump, hydraulic unit Manufacturer likely Italian Type: PF1/1-2.8/2.8 Year of manufacture: approx. 2000 Operating pressure: 50 bar, max. 100 bar Flow rate: 2 x 4 liters/min. (2 pumps) Tank capacity: approx. 25 liters Motor power: 1.5 kW Power supply: 220 volts, 50 Hz - Double pump, tandem hydraulic pump, type PF1/1-2.8/2.8 131DBV601 - 1 return filter - 2 pressure gauges Rodpsxrgt Ssfx Aa Uop - Tank dimensions (L/W/H): 320 x 300 x 290 mm - Pressure port connections at the hydraulic pump outlet: 10L Installation space required (L x W x H): 600 x 400 x 600 mm Net weight: approx. 70 kg Very good condition

Condition: used, Hydraulic Power Unit ORSTA Year of manufacture: 1987 With 3 motors and various hydraulic circuits Tank capacity: 160 litres Pump power: 5.5 kW - 2 units of pressure accumulator, 160 bar, 25 litres each - 1 electric pressure switch - 7 units of 4/2-way hydraulic valve with solenoid coil Rjdpsxcitpefx Aa Uop - 5 units of 4/2-way hydraulic valve with solenoid coils - Oil cooling with water cooler and electric pump for internal water circuit Dimensions (L x W x H): 1300 x 750 x 1700 mm Weight: approx. 400 kg Offered without oil content

Condition: new, Year of construction: 2025, pressing force: 60 t, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 20 t, stroke length: 400 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 60/20 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-column hydraulic deep drawing press is a rigid and compact solution designed for precise metal forming, deep drawing, and metal spinning applications. Thanks to its four-column construction, the press maintains stable parallelism and perpendicularity tolerances throughout the pressing process. The frame is constructed from St52 grade steel and subjected to stress relieving via vibration. Ram and blank holder systems can be controlled independently; stroke and pressure settings are finely adjusted via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motors, and an automatic lubrication system, it delivers long-lasting, safe, and efficient operation. The PLC-controlled system minimizes operator errors. This model is an ideal solution for small to medium scale metal spinning, deep drawing, die testing, and auxiliary pressing tasks. Key Advantages - Rigid four-column press body - Independent stroke and tonnage control for ram and blank holder - System parameters can be set via touchscreen panel - High precision and repeatability - Low maintenance requirements and long service life Applications - Metal spinning operations - Deep drawing processes - Die testing and prototype production - Metalworking and auxiliary production lines ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. induction-hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Ton CAPACITY (BLANK HOLDER): 20 Ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 400 mm STROKE (BLANK HOLDER): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELDING STRESS RELIEF: Vibratory stress relieving WELDING APPLICATION: WPQR and WPS certified by TÜRK-AK per EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DOWN SPEED: 150 mm/s MOVING TABLE DRAWING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 175 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 100 mm – Ck45 Redpfxox N Ulge Aa Ujp AUXILIARY FAST ADVANCE CYLINDERS: 2 units APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION METHOD: Automatic (adjustable from panel) RAM / BLANK HOLDER STROKE & TONNAGE CONTROL: Adjustable from panel SYSTEM & PRESS STATUS MONITORING: On-screen display DIE MEMORY: Adjustable via panel LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.