Sliding table saw

Altendorf F 45 ProDrive

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, saw blade guard, scorer, For sale is a new Altendorf F45 ProDrive with extensive features. Features: +ProDrive control with a 3.5" color display +Ergonomic operation at eye level +5.5 kW main motor +Speeds: 3,000 / 4,000 / 5,000 rpm +Saw blade diameter up to 450 mm +Cutting height up to 154 mm +Double roller carriage with 3,000 mm carriage length +CNC parallel fence with 1,300 mm cutting width +2-axis scoring unit with electric height and side adjustment +Angle mitre fence DIGIT L up to 3,200 mm +DUPLEX mitre fence up to 1,350 mm (additional cost of €1200 net) +Table extension 840 mm +99 storable cutting programs +USB interface and operating hour counter +Automatic dimension correction when the saw blade is pivoted +Machine height 910 mm +400 V / 50 Hz Other models or different equipment variants available upon request. Lodpsz Ey Elsfx Abyshn Inspection possible by appointment. Invoice with VAT stated. Transport can be arranged upon request.

Condition: used, SCM 320cm SiX panel saw 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. All adjustments are functional. Lhjdpozd Uf Tjfx Abyen

Condition: excellent (used), Altendorf F45 ProDrive panel saw 300cm carriage, 0-45 degree tilt, and motor-driven blade height adjustment, right-hand rip fence with manual adjustment and electronic display, cutting width 1350mm 0.75KW scoring saw, 2-axis, electrically adjustable With parking function LED lighting during scoring saw operation 5.5KW main motor; 3 cutting speeds max. blade diameter 450mm, Left-hand rip fence on the carriage with angle adjustment Laser line indicator Ljdpfx Abjzypxmoyehn Very good condition

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23-07-12-045, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, table height: 910 mm, cutting width at rip fence: 1,000 mm, The machine is in very good condition with minimal signs of use! The machine was used for processing aluminum. TECHNICAL DETAILS Maximum blade diameter: 550 mm Cutting width at CNC parallel fence: 1,000 mm MACHINE DETAILS Machine height: 910 mm Motor power: 7.5 kW Lhedpfxoytpxno Abyjn EQUIPMENT Table extension: (length: 840 mm) Double roller carriage (length: 3,000 mm) 2 pneumatic quick clamps (application range: 0–90 mm) Eye-level control panel Template holder directly at the control unit Increased cutting height including saw blade tilting TIP-SERVO DRIVE CNC angle fence UNO 90 Additional cross slide incl. connection Front support roller Air cushion table Spray device Note: The machine comes from a business liquidation, has been professionally dismantled and placed in storage.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. Lhsdpfx Aszukurjbyjn The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: reconditioned (used), Year of construction: 2023, machine/vehicle number: GM010.0396, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, table length: 840 mm, Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Machine height: 910 mm Lsdpfxexc Uq He Abyohn Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 5,000 rpm, cutting width at rip fence: 1,300 mm, TECHNICAL DETAILS Saw blade diameter max.: 450 mm Cutting width at CNC parallel fence: 1,300 mm Max. speed: 5,000 rpm Infinitely variable adjustment Double roller carriage length: 3,000 mm Mitre angle stop length: 3,200 mm Digitally adjustable Table extension: 840 mm Pneumatic quick-clamp range: 0-90 mm 2 quick clamps Lhjdpfx Asy H Errsbyen MACHINE DETAILS Power: 7.5 kW EQUIPMENT CE marking Saw blade guard Double roller carriage with TIP-SERVO-DRIVE Air cushion table Spray device with remote control Front support roller 2 pneumatic quick clamps Digital mitre gauge L CNC parallel fence

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Extract Duo dust extraction unit technical specifications: Fan power kW: 5.5 Filter area m2: 36 Lhodpfx Abjz E Rinjyon Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000

Condition: used, Year of construction: 2017, HOMAG PROFI BMG310/42/F/K – 5-Axis CNC CNC machining center in gantry design for wood and wood-based materials, year of manufacture 2017. Equipped with a Drive5C 5-axis main spindle, cantilever table with LED positioning aid, and a permanently installed drilling unit. Technical data Manufacturer / Model: HOMAG PROFI BMG310/42/F/K Year of manufacture: 2017 Design: CNC machining center in gantry design 5-axis head: Drive5C, HSK F63, 0-24,000 min⁻¹ Spindle power: 10 kW S6 / 9 kW S1 Swivel ranges: A: ±100° / C: ±361° (position-dependent) Workpiece length: 4,200 mm standard working area; up to 4,375 mm with a Ø25 mm cutter Workpiece width: 1,350 mm; up to 1,600 mm at the rear stop with a Ø25 mm cutter Workpiece thickness: Max. 300 mm including clamping devices Cantilever table: 8 manual consoles, Y = 1,350 mm, LED position indicator Tool changer: 14-position disc changer + 8-position linear changer (nominal) Drilling unit: 31 spindles: 21 vertical / 10 horizontal Notch saw: 0/90° swiveling, saw blade Ø125 mm Vacuum system: 290 m³/h at 50 Hz, frequency-controlled Ledpfxj Advkbs Abyshn Control / Software: powerTouch, woodWOP 9.0; Windows 10 Enterprise LTSC Media connections: 400 V / 50 Hz, compressed air min. 7 bar Extraction: Connection Ø250 mm; 4,950 m³/h according to connection data sheet Scope of delivery The complete machine with the permanently installed machining units described above is offered. Loose additional units and accessories are not included in this offer. Price and exact availability upon request. Information on working areas depends on the tool and clamping devices used. The scope and transferability of the software license must be clarified in each individual case. Location: Germany. Planned availability: Week 06/2027; exact date to be agreed. Price upon request. Operating hours and software (recorded on 20.10.2026): Main operation: 2,581.47 h Secondary operation: 1,609.12 h Total operation: 19,021.39 h The data corresponds to the designations of the machine control; no separately indicated spindle hours. Software version: woodWOP 9 Executable 9.0.1034.0; Microsoft Windows 10 Enterprise LTSC 1809 x64.

Condition: new, - 7.5 kW (10 HP), 3 speeds - Motorized height and tilt adjustment - Large protective hood - Double sliding table 3,200 mm - Scoring tool preparation - Parallel stop, cutting width 1,000 mm - Miter stop 3,450 mm, without length compensation Lhodpewh Um Ujfx Abyon - Table top extension/widening: Powder-coated surface Further options available upon request!