Filter and sack filling system

AL-KO

Condition: as good as new (ex-display), Clean Air Filter Type: Power Unit 250 P FU Offer type: Demonstration machine Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Inlet diameter: 250 mm Redohfmpxjpfx Ammju Rated air flow: 3,534 m3/h Max. air flow: 4,900 m3/h Negative pressure at rated flow: 3,184 Pa Filter surface area: 22.4 m2 Compressed air cleaning including integrated pre-separator including integrated automatic extinguishing system including inverter for speed control including integrated acoustic enclosure (-4 dB(A)) Chip collection volume: 2 x 250 L Sound pressure level: 71 dB(A) incl. dust lock Dimensions (L x W x H): 3,000 x 1,058 x 2,361 mm Weight: 850 kg

Condition: excellent (used), total width: 36,000 mm, total length: 90,000 mm, total height: 9,500 mm, For Sale: High‑Quality Steel Warehouse Hall Structure – ASTRON LINDAB Good morning, We are offering for sale an exceptionally solid and durable ASTRON LINDAB steel warehouse hall structure with a total area of approximately 2,800 m² and a height of over 8.5 meters. This structure was originally erected in Warsaw for the renowned company PURMO RETTIG HEATING, a global leader in the heating industry. A few years ago, the entire property on which the hall was located was sold and redeveloped into a new residential complex. As a result, the warehouse hall was fully dismantled under the supervision of ASTRON LINDAB representatives. All structural elements were then transported and reassembled on another of our properties, strictly in accordance with ASTRON LINDAB guidelines. The dismantling and reassembly were carried out by a professional, specialized company. Every structural element has been catalogued, labelled, and numbered. Technical Specifications: Total area: approx. 2,800 m² Span width: 36.6 meters Total length: 90 meters Height: 8.64 meters (maximum height 9.36 meters) Number of segments: 14 No internal support columns Modular Sale Option The hall can be sold as two or three smaller modules, for example: 1,500 m² / 1,000 m² / 800 m² Please note: the price of smaller modules is 25% higher. The current market price of a new, identical structure is approximately: PLN 1,700,000 net / EUR 400,000 net Rodpfx Amjylc Uyomsu Important Information: We are selling only the steel structure, including all steel tension elements and structural bracing, steel structures of the side walls and roof. Roof and wall cladding panels are not included and must be purchased new and installed after erecting the structure. Additionally, we have all original bolts, nuts, and dismantled components, carefully sorted and stored in two large maritime containers. We also possess the original hall design documentation and can provide access to a structural engineer if a new adaptation or a building permit design is required for this structure. This offer represents a unique opportunity for anyone planning to construct a similar warehouse hall at a significantly reduced cost. PRICE: EUR 179,000 netto (750.000zł netto) We invite serious buyers to contact us.

Condition: used, ALKO clean air extraction unit, Power Unit 200P - used Air filtration using filter hoses, Cleaning performed pneumatically, Rodey T Ebgjpfx Ammeu Dust-tested, Mobile collection container ----- Technical data ----- Extraction nozzle diameter: 200 mm, Nominal air flow rate: 2,261 m³/h, Maximum negative pressure: 2,174 Pa, Number of bags: 2, Motor: 3 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,300 x 850 x 2,050 mm, Weight: 470 kg

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, Rodpou R S A Refx Ammju max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Rjdpfx Amevvizkomeu Storage location: Garbsen

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Rsdpfeu T Hrpjx Ammeu Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. Rjdpfx Aexpximjmmou All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: as good as new (ex-display), Year of construction: 2011, Used storage tank made of steel according to EN 12285-1 (with test certificate) double-walled, for underground storage of fuel oil and diesel fuels, 1 dome (alternatively 2 domes possible). Capacity: 100,000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18,800 kg In addition, we can also equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detector - Dome shaft with shaft cover in walkable or traversable drive-over design - Partition walls (as multi-chamber tank) - Interior coatings (e.g. 2-component epoxy resin), partial or full linings - Content and level measuring devices as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Dispensers for diesel, biodiesel and gasoline - with complete tank data acquisition on request - External tank insulation with PU foam Tank is cleaned inside and outside coating is overhauled and checked with 14 kV. A cost-effective delivery with our own truck is possible. Just tell us the delivery place, you will get the exact freight cost immediately. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: Rodpfx Amoi Enxdemsu - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Redjwzyh Rspfx Ammju Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Rsdpfxjyffx Io Ammeu Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Year of construction: 2013, condition: used, Features: * Used telescopic belt conveyor. * Condition: fully functional with traces of use * Ideal for fast material transport * Professionally disassembled and packed * Incl. feet * Incl. control cabinet * 3 pieces in stock * Price per piece Technical data: Manufacturer: VanDerLande Year of manufacture: 2013 Model: TTB-800- 4x16 Belt direction: loaded and unloaded Color: anthracite gray Total length retracted: 5.550 mm Total length extended: 16.000 mm Total width: 1.500 mm (incl. control cabinet) width: 1.220 mm belt width: 800 mm Condition: good (used) belt type: smooth / black Conveying height: 1.100 mm Own weight: 3.300 kg Two speed levels adjustable. Telescopic belt conveyor The telescopic belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal process flow. During transport, the telescopic belt conveyor can convey sensitive and differently sized totes, boxes or other packaging and item units to the loading or delivery point and also serves, for example, as a connecting route in front of or between production and processing machines. It also enables efficient parts transport in the plant and warehouse and is used to convey considerable conveying volumes and distances. Rsdpoiuqcwjfx Ammsu Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: good (used), Available quantity: 3 Rodjy Uizyepfx Ammsu

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 31 m², Dust extraction unit, chip extractor, self-cleaning filter, vacuum, pneumatic ALKO MOBIL JET 300 The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is positioned on the clean air side, minimizing explosion risk. The unit is additionally equipped with a fire protection system. Perfectly suited for wide belt sanders and all types of dry dust in various technological processes – filtration bags can be replaced to suit specific requirements and applications. Fan power: 7.5 kW Capacity: 6000 m3/h Rsdey Rz T Hjpfx Ammju Vacuum: 2400 Pa Nozzle diameter: 300 mm Air return Automation for direct start from machines. Stock no.: 1131

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A Rsdpfx Amofnvwqemou - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Rsdohby Rijpfx Ammou Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg