Item Saw blades AKE

AKE

Condition: excellent (used), Year of construction: 2020, AKE Technologies Vehicle Shaker System Manufacturer: AKE Technologies GmbH Type: Vehicle Shaker System Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled test conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per stroke table, according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Fodpfx Ajzazm Rokksgd Activated functions: 8 input channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance investigations Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. Scope of delivery AKE Shaker System for Vehicles Control and operating system Industrial control cabinet Operator computer Installed test software High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement, control and connecting cables Documentation and software media Tools and accessories as shown in the pictures Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Important note: All information is provided to the best of our knowledge, based on available documentation, software displays and nameplates. Deviations in technical data are possible. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, DCV series extractors in the TC Viber version have been created. Designing a new technological line has allowed us to create high-class extractors Advantages has an additional pair of doors for easier bag replacement DCV 6500TC extractor is another milestone in the production of efficient sawdust and dust extractors whose aim is to constantly provide the same extraction parameters during the entire work cycle. the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Failure-free filter shaking system with the possibility of working in an automatic cycle The new patented security system on the market guarantees failure-free operation of the device, durable, massive construction guaranteeing quiet and vibration-free operation of the extractor takes up little space and yet can extract large amounts of dust and chips > strong and quiet fan guaranteeing high vacuum efficiency! failure-free operation confirmed by production plants dealing with large orders every day they have a special blade design, making them more efficient and effective, and also contributing to energy savings very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 6500 extractors quick replacement of waste containers designed in such a way as to maintain 99.99% airtightness of the system, metal waste containers with a mobile driving system facilitating trouble-free movement. Also equipped with a peephole to help check the level of filling of the containers low noise and high efficiency are ensured by a balanced metal rotor and an improved engine ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. Control cabinet for switching the device on / off We guarantee high quality of cleaning !!! polyester filter stops dust up to 5 microns in diameter, to filter smaller particles, use a filter such as HEPA It is forbidden to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw material, e.g. wet sawdust) Before starting the extractor, dismantle the lower beam to have free access to the containers for shavings POLISH PRODUCTION Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION EFFICIENCY 6500 m3/h SUCTION PORT DIAMETER 280 mm SPEED SUCTION 28-32 m/s FILTER SURFACE 16 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 32 WASTE CONTAINER CAPACITY 500 L DIMENSIONS 2440 x 930 x 2270 mm WEIGHT Fedpfxeuc U N Ue Akksgd 440 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Fgsdpfxeb A Sqaj Akkjd -Outer diameter: 150 mm -Number: 2 milling cutters Price: complete -Weight: 11 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete Fodpeb A Sqiofx Akkegd -Weight: 23 kg

Condition: good (used), Code: 0228 Fgodpoxnxumofx Akkjd Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520

Condition: good (used), End mill, shank cutter, cutter, slot cutter, wood cutter -Two-knife cutter -Roughing-finishing end mill -4x: Milling cutter Ø 4 x 12 mm -7x: Milling cutter Ø 5 x 12 mm -10x: Milling cutter Ø 6 x 14 mm Fgodpfx Akeb D I Axoksd -1x: Milling cutter Ø 8 x 20 mm -5x: Milling cutter Ø 10 x 20 mm -4x: Milling cutter Ø 11 x 22 mm -3x: Milling cutter Ø 12 x 22 -Hole: Ø 10 mm -Type: M623 -Quantity: 34 pieces -Sale: only complete set -Weight: 3.6 kg

Condition: used, Saw blade, wood saw blade, circular saw blade -0402-5021202 HW -UFN - equipped -Ø 200x4.1/2.8x65 -Z36 = T 17.44 -n max. 9000 -Price: per piece -Number: 2x available Fedpfx Asb Uhltekkogd -Weight: 0.7 kg/piece

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics new Siemens S7 control system Completion upon order Fodpfev Diy Aex Akkegd Crosscutting machine with chalk mark detection Wood cross-sections 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter electric thickness adjustment

Condition: used, Saw blade, wood saw blade, circular saw blade Fgedpob Uhl Hjfx Akkod -Ø 355x4.3/3.2x30 -Z72 = T 15.49 -n max. 5500 -0904-1041782x HW -UFN- equipped -Price: per piece -Number: 1x available -Weight: 2.6 kg/piece

Condition: used, Saw blade, wood saw blade, circular saw blade -Ø 350x10.0-11.8x60 -Z 36 = T 30.53 -n max. 5500 -0299-995600572 -Price: per piece -Number: 5x available -Weight: 6 kg/piece Fsdpeb Uhl Tjfx Akkjgd

Condition: used, Year of construction: 1989, functionality: fully functional, Used in good condition Fedpfx Akjymlr Rskegd

Condition: used, Saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade HM NE PRO -Type: Ø 350x3.5/3.0 x 32 Z92 = T 11.95 Fedpsuaqzbsfx Akkegd -Art. No.: 0507-1064541X HW -Speed: n max. 5400 rpm -Dimensions box: 390/390/H10 mm -Weight: 2.3 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Fgjdjb A Sp Njpfx Akkod -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 12 kg

Condition: new, saw-blade dia. 500 mm Cutting height 120 mm Motor output 5,5/7,5 kW working length 4100 mm Fgjdpowhf Ipjfx Akkod

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 0 mm Fedob A Sqpepfx Akksgd -Number: 2 milling cutters Price: complete -Weight: 10 kg