Electric motor 30 kW 2970 rpm

Aerzen WEG 200L-02

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Lasdpog Ey Rfsfx Aa Eok Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants Lajdjiuznuspfx Aa Eok - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, feed length Y-axis: 6,000 mm, Kippwanne für Baumstämme bis zu 6 m länge. Tipping tray for logs up to a length of 6m Verfügbar ab September 2024 Available from September 2024 Laedpfx Asr Iig Doa Ejk

Condition: ready for operation (used), There are 26 motors available. Laedpfsikrb Iox Aa Eok

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen Lasdog Ezarspfx Aa Eek -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads Lajdpjrigxyofx Aa Esk electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: ready for operation (used), An air-conditioned office and commercial container Aztech is available. U-value: approx. 0.38W-0.46W/m²K, floor load capacity: approx. 100kg/m², interior height: approx. 2500mm, external dimensions X/Y/Z: approx. 3000mm/3000mm/2600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Laedsw D Eubspfx Aa Esk

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to Ledpfx Aasvuhume Eoak the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack Lodsf Tdt Ijpfx Aa Eoak -Manufacturer: HL, hydraulic unit for hydraulic punch -Type: DK52 1-6-250P-391K -Motor: Junginger 5.5 kW/1455 rpm -Nominal pressure: bar -Liter output: l/min -Pressure display: up to 250 bar -Pressure accumulator: Hydac 2.5 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 540/630/H1210 mm -Weight: 198 kg

Condition: used, Year of construction: 2001, functionality: fully functional, Model: BAS 051. Automatic Flash Butt Welding Machine for Band Saw Blades. Pneumatic clamping. Annealing pyrometer. Inserting bar for blade positioning. UniOp automatic annealing temperature control. Machine cleaned and repainted. Year of manufacture: 2001. Nominal primary voltage: 380 [V AC]. Max. welding rating: 8 [kVA]. Lajdpsxcnzrjfx Aa Eek Clamping force: 20 [kN]. Forging force: 5 [kN]. Welding ranges. Band saw blades for wood: 6-50 [mm]. Bi-metal bandsaw: 6-41 [mm]. Hoop knives: 6-50 [mm]. Stainless steel bandsaw: 6-30 [mm]. Weight: 600 [kg]. Dimensions (W*D*H): 1350*1000*1700 [mm]. Instructions and packing included.