Used Schuko for sale (55)

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Gedpfxe Ahkkho Aikobw Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: good (used), Year of construction: 2010, functionality: fully functional, volume flow: 5,500 m³/h, total length: 2,650 mm, total height: 1,860 mm, total width: 800 mm, intake manifold diameter: 350 mm, power: 2 kW (2.72 HP), intake vacuum (max.): 920 mbar, Schuko Paint Mist Extraction Wall SUPERMAX Year of manufacture: 2010 Nominal volume flow rate: 5,500 m³/h Impactor area: 3.2 m³/h Negative pressure: 920 Pa ATEX: EX III 2G EExe L/W/H: 2650x800x1860 mm As inspected, available for pickup at the Seevetal location, Ex works, without transportation, Gbjdpfs Ah Ekxox Aikjw Subject to prior sale.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 1040070, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,200 m³/h, filter area: 1.9 m², noise level: 76 dB, actuation type: electric, total height: 1,460 mm, total length: 1,250 mm, total width: 820 mm, overall weight: 140 kg, Used, fully functional dust extraction unit from Schuko in a robust industrial design. Ideal for extracting wood dust and shavings from woodworking machines. Thanks to its mobile design, it can be used flexibly in the workshop. Manufacturer: Schuko Gbsdpfx Aie Af I Sxskow Model: MiniMax F 300 Year of manufacture: 2014 Good used condition Ready for immediate use If you have any further questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 623 030, functionality: fully functional, volume flow: 10,000 m³/h, intake vacuum (max.): 350 mbar, suction capacity: 6,927 m³/h, intake manifold diameter: 350 mm, filter area: 50 m², noise level: 69 dB, actuation type: pneumatic, total length: 3,920 mm, total width: 1,610 mm, overall weight: 1,160 kg, SCHUKO Vacomat XP TWIN 350 Gbedpfx Aioz Rmkmekew

Condition: good (used), Year of construction: 2002, functionality: fully functional, volume flow: 3,600 m³/h, total length: 2,650 mm, total height: 1,355 mm, total width: 800 mm, nominal power: 1.5 kW (2.04 HP), Schuko paint mist extraction wall, Farbmax model Gsds Ah H Hrjpfx Aikobw Year of manufacture: 2002 Airflow rate: 3600 m³/h Motor power: 1.5 kW Protection class: EExe, II, PTB No. Ex-86/34 Dimensions (L/W/H): 2650 x 800 x 1355 mm

Condition: good (used), Year of construction: 2001, machine/vehicle number: 077359, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, volume flow: 7,500 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 7,500 m³/h, intake manifold diameter: 300 mm, filter area: 36 m², noise level: 76 dB, actuation type: electric, total height: 4,000 mm, total length: 1,600 mm, total width: 2,250 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Due to the purchase of new equipment to expand our machinery, this functional dust extraction unit is for sale. Gjdez Erfdspfx Aikebw It can be inspected up to week 42; after that, we will dismantle it. The impeller was replaced in October 2025 – a parts invoice is available.

Condition: excellent (used), Year of construction: 2008, Schuko Vacomat 300 – Year of manufacture: 2008 – In excellent condition – Performance: 7.5 kW (10.20 hp) Input voltage: 400 V Input current: 15 A Input frequency: 50 Hz Volume flow rate: 5,800 m³/h Suction pressure (max.): 38 mbar Suction capacity: 5,800 m³/h Suction pipe diameter: 300 mm Total weight: 830 kg Features: CE marking Location: available from warehouse 54634 Bitburg – immediately available – Gbodez Eub Ispfx Aikew

Condition: like new (used), Year of construction: 2022, Demonstration Unit Year of Manufacture: 2022 Condition: Like new, 0 operating hours Features and Technical Specifications: - Sound-insulated, “Silent and SaveEnergy” - With automatic shut-off - 2 fans, speed controlled via inverter Gedpfx Aszwqd Seikobw - Jet cleaning - Filter categories M and H3 - Filter area: 50 m² - Airflow: 6,927 m³/h - Negative pressure: 3,365 Pa - 4 collection bins - Motor: 2 x 5.5 kW - Total power consumption: 11 kW - PLC touchscreen control - Intake connection: 350 mm - Weight: 1,160 kg - Dimensions: 3,900 x 1,620 x 2,660 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5031183-000 104, input frequency: 50 Hz, input voltage: 400 V, power: 3 kW (4.08 HP), - Briquetting press with a storage container for compressing textile fibers of various material qualities - Our area of application: textile scraps (dust) from the tearing process - Also suitable for compressing wood scraps - The system was in operation from 2015 to 2020 Technical data: - Briquetting press with a 3kW hydraulic drive - 1400 RPM - 400V, 50 Hz - Briquetting output, depending on the type of chips and moisture content, 80 - 100 kg/h - Complete with 125 liters of hydraulic oil – including oil cooler and base - Transport lines + supports - Pusher plate SB1 with discharge screw, hydraulics, and electrical control, size 2000 x 2000 mm - Screw motor: 1.5 kW, 34.9 RPM - Hydraulic unit: 0.55 kW - Accessories CE: EC Declaration of Conformity according to Machinery Directive 2006/42/EC Godpfxezcnvko Aikobw Note: The system is located in Ulm and can only be inspected there.

Condition: used, Year of construction: 1997, Air supply system Manufacturer: Schuko Type: WZL 89 Year of manufacture: 1997 Technical data - Airflow rate: 8900 m3/h - Heat output: 115 kW - Motor: 2.5 kW - 2 speeds - Heating coil - Air supply filter Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding. Godpfx Ao Aiqq Nsiksbw

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Filter capacity 14,5 m² Number of dust containers 3 St. Gbsdpfx Aiez I Uc Djkew Weight ca. 500 kg 200 mm

Condition: used, Year of construction: 2008, machine/vehicle number: 1001877, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 14,100 m³/h, intake vacuum (max.): 450 mbar, suction capacity: 14,100 m³/h, intake manifold diameter: 450 mm, filter area: 125 m², actuation type: electric, total height: 5,800 mm, total length: 2,100 mm, total width: 2,100 mm, overall weight: 2,000 kg, Equipment: CE marking, documentation/manual, dust extraction, Schuko Ecovar extraction system, 14,000 m³/h – complete and operational Complete Schuko Ecovar industrial extraction system for sale, including a 22 kW main fan, a 7.5 kW transport fan, and the corresponding control system. The system is currently in operation and can be inspected while it is running. Due to an expansion of our capacity, this system will be replaced by a larger, new Schuko extraction system. An interesting complete system for companies looking for a powerful used extraction/filtration system with a capacity of approximately 14,000 m³/h. Key features * Capacity: approx. 14,000 m³/h Gbedpfx Aiez Egzmsksw * Filter area: 125 m² * Main fan: 22 kW * Transport fan: 7.5 kW * 100 filter hoses * Electric/pneumatic filter cleaning * Antistatic filter material * Includes the corresponding control system * Complete system * Currently in use and can be inspected while running Technical data for the filter system Brand: Schuko Type: Ecovar 04 22020/25/125, through-flow Design: overpressure, static Number of elements: 1 Material extraction: transport fan Filter material: antistatic polyester needle felt, BIA, AWN 05 Diameter of filter hoses: Ø 160 mm Length of filter hoses: 2,500 mm Number of filter hoses: 100 pieces Filter fabric area: 125 m² Filter cleaning: electric/pneumatic Weight: approx. 2,000 kg Dimensions of the filter system (L × W × H): approx. 2,100 × 2,100 × 6,000 mm Main fan Brand: Schuko Type: S 450/O/L2 Connection diameter: Ø 450 mm Capacity: 14,100 m³/h at 3,412 Pa Motor power: 22 kW Drive: direct Transport fan Brand: Schuko Type: TSK 250/O/S4 Connection diameter: Ø 250 mm Capacity: 4,500 m³/h at 3,344 Pa Motor power: 7.5 kW Drive: indirect Design: reinforced Condition and availability The extraction system is currently operational and is being sold only because it is being replaced by a new Schuko system with a larger capacity. This provides the opportunity to inspect the system while it is running before dismantling. Availability upon consultation. Dismantling and transport upon consultation. Serious interest? Please feel free to contact us for additional information, photos, technical data, or to arrange an appointment to inspect the system while it is running.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 43 m³/h, filter area: 43 m², Equipment: CE marking, documentation/manual, a SCHUKO dust extraction system with 5 metal containers and a 43 m³ filter area; can also be sold as a complete set including the entire installation. Gbsdszzzg Sepfx Aikew

Condition: used, Year of construction: 2002, Extraction system Manufacturer: Schuko Type: Vacumat 160 Year of manufacture: 2002 Technical data - V Nominal flow rate: 1950 m3/h - V min.: 1441 m3/h Gbjdpfx As Ah E Rweikjw - Motor power: 2.2 kW - Nominal speed: 2850 RPM - Nominal current: 4.6 A - Nominal operating voltage: 400 V - Frequency: 50 Hz - Fan motor: 3-phase 400 V, 2.2 kW, 50 Hz, 2800 RPM Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Gjdpfozb N T Ujx Aikobw Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 2.2 kW (2.99 HP), volume flow: 1,447 m³/h, intake manifold diameter: 160 mm, filter area: 9.5 m², noise level: 69 dB, total height: 2,130 mm, total length: 1,720 mm, total width: 900 mm, overall weight: 320 kg, Equipment: CE marking, Dust class M Gbjdpjy Tt Smefx Aikew Motorized filter cleaning

Condition: used, Year of construction: 2004, Used machine with separate base frame for Vacomat S/N and discharge screw Year of manufacture: 2004 Features and Technical Specifications SCHUKO VacoVent 750 fan unit - Clean air exhaust fan for SCHUKO Vacomat filter systems - Motor power: 7.5 kW - Nominal airflow: 5,089 m³/h - Associated negative pressure: 3,720 Pa - Sound pressure level: 72 dB(A) - Compact, separate fan unit for integration into a compatible extraction system Separate base unit for Vacomat S/N - Equipped with a motor-driven discharge screw - Mechanical discharge of collected dust and chip material for further conveyance - Gear motor power: 0.55 kW Gbede Af I Imopfx Aikew - Operating voltage: 400 V - Current consumption: 1.55 A - Frequency: 50 Hz - Screw drive speed: 11 rpm - 3-phase alternating current - Manufactured in Germany Shipping dimensions: - Fan unit: 1,230 × 840 × 905 mm - Base frame: 1,400 × 1,280 × 1,100 mm - Base frame weight: 268.5 kg

Condition: good (used), Year of construction: 2018, machine/vehicle number: 14418098, Offer 19370 Technical data: - Volume flow rate approx. 1447 m³/h. - Negative pressure 2200 Pa Gbodszgcywepfx Aikjw - Filter area 9.5 m² - Drive power 400 V / 2.2 kW - Space requirement W 1750 x H 2150 x D 900 mm - Weight approx. 350 kg

Condition: used, functionality: unexamined, For sale is a used, single Schuko radial fan with a directly mounted three-phase motor. According to the nameplate, the motor output is 4 kW, the rated speed is 2,900 rpm, the rated voltage is 380 V, and the frequency is 50 Hz. Scope of delivery: fan housing with impeller and mounted electric motor, as shown in the photos. This is not a complete exhaust system. The fan shows age-related and usage-related dirt and paint chipping. No current function test has been performed. Therefore, the functionality of the motor and fan cannot be confirmed. The fan is sold for inspection and possible repair or as a source of spare parts. The year of manufacture, exact model designation, air flow rate, and pressure are unknown. Inspection is possible by appointment at the location in Thun, Switzerland. The fan is sold in its current, untested condition without any guarantee of functionality or warranty. Collection, loading, and transport are to be organized and paid for by the buyer. In the event of export, any applicable customs clearance and import costs will be borne by the buyer. Gsdez Iuiwjpfx Aiksbw

Condition: like new (used), Year of construction: 2018, Schuko Vacomat 200 XPe Motor power: 4 kW Gbsdpfx Ajy Na N Roikew Suction connection: 200 mm Filter area: 14 m² Machine dimensions: 2645 x 900 x 2130 mm Weight: approx. 500 kg Nominal airflow: 2495 m³/h Negative pressure: 2800 Pa Year of manufacture: 2018 Price

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1990 Features and Technical Specifications - Motor: 11 kW - 2600 pa Geds Af I Ifspfx Aikebw - Inlet openings: 350 mm

Condition: good (used), Year of construction: 2005, machine/vehicle number: 18052, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, volume flow: 5,800 m³/h, intake vacuum (max.): 38 mbar, suction capacity: 5,800 m³/h, intake manifold diameter: 300 mm, overall weight: 830 kg, Equipment: CE marking, Well-maintained, fully functional dust collector, for sale on behalf of a customer. Gsdpfx Aozd Uixeiksbw Location: near Karlstadt.

Condition: ready for operation (used), Year of construction: 2012, Schuko Type Octopus 30 Ø Connection: 200 mm Required air volume: 3,000 m³/h Required negative pressure: 1,100 Pa Table length: 3,280 mm Table width: 1,000 mm Table height adjustable from 700 to 1,000 mm Max. sound pressure level: 63 dB(A) Weight: 200 kg Gbsdpfxjyz St Ee Aikjw Year of manufacture: 2012

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake manifold diameter: 350 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, Schuko Intermediate Filter System “Eco Var 04” Professional dust extraction system Schuko Eco-Var 04 (year of manufacture 2004) – complete system including piping, control system, and emission permit. For sale is a powerful and fully functional industrial dust extraction system from the premium manufacturer Schuko, type Eco Var 04 (year of manufacture 2004). The system is ideally suited for woodworking companies for efficient extraction of chips and dust and is offered including an extensive pipe and control system infrastructure. Technical data & equipment • Manufacturer: Schuko • Model series: Eco Var 04 (intermediate filter system) • Year of manufacture: 2004 • Drive power: approx. 11 kW (powerful, efficient fan) • Discharge: Rotary valve airlock with 5 sealing lips (ensures safe, pressure-loss-free material discharge into containers, silos, or briquetting presses) Extensive accessories & infrastructure (included) • Pneumatic valves: approx. 20 units for automatic shut-off of individual machine connections. • Pipe & hose system: approx. 80 meters of robust extraction pipe including the corresponding flexible hoses. • Pneumatic infrastructure: compressed air connections including all associated pneumatic hoses for valve control. Product advantages & condition • Complete package: No tedious searching for individual parts – from the filter system to the piping and the complete control and pneumatic system, everything is available for workshop installation. • Robust industrial quality: The Eco-Var series from Schuko is known for its durability, high filter area, and reliability in daily workshop use. Gjdpfx Aijzddwgokobw • Energy-efficient: Thanks to the approx. 20 pneumatic valves, the extraction performance is only provided where work is currently being carried out, which saves a lot of energy. Note for buyers: The system is in a well-maintained and fully functional condition, appropriate for its age. Inspection can be arranged.

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Gedpfx Aovxk Ansiksbw Storage location: Nattheim