Year of construction: 2006, operating hours: 30,000 h, Condition: used, Functionality: fully functional, The Elumatec SBZ 608 is a 5-axis machining center specifically engineered for post-processing operations, including screwing reinforcement, drilling, and milling profiles. It is widely used in the production of windows, doors, and facade walls, offering precision and efficiency for high-cross-section profiles. Built in 2005, it is a robust solution tailored for small to medium-sized companies in the construction and manufacturing sectors. Dcshxjv S Di Io Dnaijg

Condition: as good as new (ex-display), Year of construction: 2024, Hydro Pneumatic Corner Crimper Dcshx Dsuxx Uonaijg EVP-350HP Hydro-pneumatic press operation Press Strength 2 x 3.500 KP at 8 Bar Press Depth 30 mm Back centring positioner with Pneumatic work piece clamping 3 sets standard crimping knives 3/5/7 mm Air service unit Profile support arms with Perdinax

Year of construction: 2020, Condition: as good as new (ex-display), Elumatec TS161-21 table saw: - Precise work due to saw cut from below - Large swivel range up to 45° to the left and up to 0° to the right The special swivel mechanism with integrated rotary table allows working from the front at all angle settings - A workpiece fence that can be moved to the rear enables optimum utilization of the saw blade capacity for wide and flat profiles - Manual saw feed - Saw blade and base included as standard - Pneumatic material clamping device (vertical) - Dosing spray device - Maintenance unit Elumatec AMS E355 processing length: 6m - For exact cutting to length of PCV and aluminum profiles - For attachment to all single head saws - Patented rail and carriage system - Length: 6000mm - With automatic cutting length adjustment Technical data E355: Dehx Dnasm Hav Usijcg - Drive independent absolute measuring system - positioning accuracy + / -0,1mm - Pneumatic blocking on position - memory for 999 data sets - correction values for profiles - Interface RS232

Condition: ready for operation (used), Bench drilling machine Wotan Rapid with control Heidenhain 315 Year : No type plate available, work spindle diameter 130 mm Tool holder: SK50 External centering 128 , 57 mm ISO 50 Speed range 25 - 1250 rpm. Speed steps 18 Y-axis 800 mm , X-axis 800 mm , W-axis 800 mm , Clamping surface 800 x 800 mm Table swivel range 360 ° Table indexing position 4 x 90 ° Feed range 1 - 2000 mm/min Manual / automatic tool change for 32 tools The machine is located in Bremen and can be inspected. _____ Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the items on offer corresponds to their age and the pictures shown. The technology and wear of the items on offer are in keeping with their age. Used machines are sold exclusively to traders and without warranty. Dcohx Dnevg E Uboaisg

Year of construction: 1999, Condition: excellent (used), RADIAL ARM SAW Graule ZS 170 N Dehxel Skkie Dnaijcg Sawblade-Ø 420 mm shipping EU ~300euro

Condition: good (used), Year of construction: 2013, Profile machining center Axis travel X-axis: 7430 mm Y-axis: 1320 mm Z-axis: 500 mm A-axis: +/-90° Working areas Djhx Dnaovy E Iboijcg X-axis: 7460 mm Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool magazine with 8 places in a protected housing, for drilling, milling and thread cutting tools, angle head and disc milling cutter, max. Ø 200 mm, + 2 places for 2 angle heads Tool holder ISO 30 In pendulum operation (2 zone machining) the working stroke per zone is limited to 3500 mm

Condition: excellent (used), Carousel punch P160D Dehx Dnet S S Egoaiocg

Year of construction: 2024, Condition: used, cutting width 180 mm Cutting height Ø140 mm Motor output 2,2 kW Djhx Dnasvnwfueiocg Cutting height at 45° Ø120 mm Dimensions (L/W/H) 700x950x1750 mm machine weight ab. 180 kg

Year of construction: 2007, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 282395-6570 002, No minimum price - guaranteed sale at the highest bid! Fully automatic cutting and processing of aluminum profiles in throughfeed for building elements, facades, furniture and industrial applications. Machine was overhauled in 2022 - in-transport plastics renewed, Schüco service done and adjusted, new circular saw blade purchased, and more TECHNICAL DETAILS Processing length: max. 7,500 mm Profile cross-section: max. 160 x 270 mm height Working height feed magazine/machine: 950 / 1,120 mm Dehx Dnou U Hf Ejaiocg Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Angle of rotation B-axis: max. ± 45° Saw motor power: 3 kW Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 MACHINE DETAILS Rated voltage/frequency: 400 V / 50 Hz Number of phases/neutral conductor/protective earth conductor: 3 NPE Rated current consumption: 35 A Machine weight: 1,700 kg Note: The machine's take-off has been shortened, but can be extended again

Condition: used, Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 20 397, Elumatec ST 225, pneumatic press Pressing force 6000kp at 10 bar Still in use can be tested at any time Dcohxerwf R Sj Dnaisg

Condition: refurbished (used), Tool changer in exchange for is used with milling machine type Matec Please select when inquiring: - Clamping system SK40 / HSK 63 - with exchange arm Dcehotqm D Tox Dnaijg - Exchange requested by fitter About us: Comprehensive service for your individual needs Nolte Engineering GmbH is a medium-sized company based in Langenfeld, North Rhine-Westphalia. We have been offering our customers a comprehensive service for machines and systems for over 20 years. Our team consists of experienced and highly qualified specialists who are passionate and committed to your needs. Our services Our range of services includes Maintenance and servicing of machines and systems of all kinds -Repairs of mechanical, electrical and electronic components -Procurement and delivery of spare parts -Technical advice and support -Optimization of machines and systems -Preventive maintenance

Condition: excellent (used), Year of construction: 1989, Pressta Eisele Emmegi Saw 550mm discs Dcohx Dog R Ifgsnaieg EU shipping ~300 euros

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, CNC machine 0verHead M40 with CAN control Year of construction: 2018 Optical condition: minimal signs of use Technical condition: good Prefabricated CNC machine for direct sale! Dcshx Dnajui Hiyeisg -Frame construction with protective housing -OverHead M40 - LES5 Travel range X/Y = 1210/910 -Please note that the travel range may vary due to any attachments -Control cabinet (1200x600x300mm) incl.4-axis control IMD CAN EC-Servo -X-axis motor EC60TM/ 200 Watt / 48 Volt -Y-axis motor 2x EC60TM/ 200 watts / 48 volts -Z-axis motor EC60TM/ 200 watts / 48 volts - with brake -iOP-TFT + swivel arm + keyboard + iPC 25-F5 with Win 10 IoT Enterprise LTSC 2019 -Z-clearance: 340mm -Z-axis travel 310mm -Spindle pitch X/Y-axis: 10mm/10mm -Spindle pitch Z-axis: 5mm -Slot clamping table 1600x1250 mm -Vertical sliding door: front -Underframe with decorative panels -Win-Remote software For operation, service and maintenance purposes, you require additional clearance when setting up the machine, based on the machine dimensions: -control cabinet side min. 1000mm -all other sides at least 500mm -to ceiling height min. 300mm Machine connection values (OverHead) -Electrical connection: 400V/16 50/60Hz -Air consumption of pneumatic options: (all approximate values) -Tool changer (WW): 50l/min pulse -Minimum quantity lubrication: 180l/min -Internal air cooling of milling spindle: 150l/min (depending on spindle type) -Cool-Min external: 150l/min (5µm and 1µm filter required) Blow-out at WW: 50l/min pulse (depending on spindle type and WW) -Compressed air connection: (min.7.5 bar permanent) 8 bar (dried and cleaned air according to ISO 8573-1, classes 2, 4, 3)) Mounted accessories: -iSA 2200 milling spindle with 2.2kW and automatic tool change function 4-fold tool change SK 20 -Minimum quantity cooling spray system Current equipment: -Please note that the travel distance may vary due to any attachments -Control cabinet (1200x600x300mm) incl.4-axis control IMD CAN EC-Servo -X-axis motor EC60TM/ 200 Watt / 48 Volt -Y-axis motor 2x EC60TM/ 200 Watt / 48 Volt -Z-axis motor EC60TM/ 200 watts / 48 volts - with brake -iOP-TFT + swivel arm + keyboard + iPC 25-F5 with Win 10 IoT Enterprise LTSC 2019 -Z-clearance: 340mm -Z-axis travel 310mm -Spindle pitch X/Y-axis: 10mm/10mm -Spindle pitch Z-axis: 5mm -Slot clamping table 1600x1250 mm -Vertical sliding door: front -Underframe with decorative panels -Win-Remote software For operation, service and maintenance purposes, you require additional clearance when setting up the machine, based on the machine dimensions: -control cabinet side min. 1000mm -all other sides at least 500mm -to ceiling height min. 300mm Machine connection values (OverHead) -Electrical connection: 400V/16A 50/60Hz Air consumption of pneumatic options: (all approximate values) -Tool changer (WW): 50l/min pulse -Minimum quantity lubrication: 180l/min -Internal air cooling of milling spindle: 150l/min (depending on spindle type) -Cool-Min external: 150l/min (5µm and 1µm filter required) Blow-out at WW: 50l/min pulse (depending on spindle type and WW) -Compressed air connection: (min.7.5 bar permanent) 8 bar (dried and cleaned air according to ISO 8573-1, classes 2, 4, 3))

Year of construction: 2008, Condition: ready for operation (used), 3-axis CNC machining center Travels X: 6000 mm, Y: 525 mm, Z: 335 mm, 7500 mm bed Electro-spindle power: 7.5 kW, speed: 20,000 rpm, Maximum magazine 8 tools, with angle transmission and disk milling cutter for machining on 5 faces 8 automatically moving vices Can operate in pendulum mode Dcohx Dsvmfbzjnaisg Year 2008 Serial number: C107787 -CAMPLUS 4.2/3 -DRILL 13.7/1 -JOB 2.8 Number of hours: 3045 h Zeroing video on request

Year of construction: 1998, Condition: good (used), Used Emmegi Automatica 550 Single head cutting-off machine from 1998 in good condition for 90 degress cutting of aluminium profiles, with pneumatic bar feeder and stop, as well as adjustment of cutting length and tolerance op to +/- 0,10 mm of the required size. Specifications: • Blade diameter: 550mm • Blade drive power: 4 kW • Blade drive rpm (50hz): 2840 1/min Dshstlpl Hex Dnaiocg • Total installed power: 4,3 kW • Operating pressure: 6-8 bar • Max. Feeder stroke: 500mm • Max. Clamp opening, feeder: 410mm

Year of construction: 2002, Condition: good (used), 4-axis machining center With the Comet, aluminum profiles, PVC materials and steel profiles up to 3 mm can be processed at any angle from 0-180°. Travels: X - axis: 6300 mm Y - axis: 525 mm Z - axis: 335 mm A - axis: 0° - 180° (infinitely variable) max. profile length with reclamping: 12000mm max. profile cross-section: 250x200mm with a tool length of Dcehxou Rry Ne Dnaisg tool length of 80mm Positioning: X - axis: 80 m/min Y - axis: 60 m/min Z - axis: 30 m/min A - axis: 10,800 °/min High-frequency milling motor 7 kW (at 21000 rpm) up to max. 24000 rpm, water-cooled Automatic tool changer with 8 + 1 places, HSK 40E collets, max. tool diameter 50mm, max. tool length 160mm With 8 clamps

Condition: good (used), Wood-aluminum window outer frame processing center. The outer frame with an aluminum profile is cut and processed such as hinge insertions and milling. Macine is fully automatic. Profiles are placed on the roller track of the device, which are caught by the clamping pawl and directed to the processing center of the machine. After processing, the finished parts are automatically placed on the carts Dcshx Dnju Hgqheaijg

Condition: new, Year of construction: 2025, OSTERBERGER PIONIER 3.3000 Economic Inexpensive 4-axis profile machining center for fully automatic 3-sided machining of profiles made of aluminum, non-ferrous metals, plastics and steel up to 4 mm wall thickness - brand new Largest machining length 3,000 mm Largest clampable profile length 4,000 mm Maximum profile cross-section 200 x 180 mm Milling spindle drive power 4.5 kW (optional 8 kW) Tool holder SK30 Milling spindle speeds 280 to 18,000 rpm Dimensions excluding mobile control panel approx. 4 m x 1.65 m x H 1.6 m Weight approx. 1,250 kg Dehx Dnaev A N Evjiscg - CNC control based on Windows® with 3D color graphics - Covered tool magazine for 6 pieces Tools Optionally available: - Automatic tool length measurement - Chip conveyor belt - Automatic front door - Barcode printer - Barcode reader

Year of construction: 2000, Condition: repair required (used), Functionality: limited functionality, machine/vehicle number: 1500050136, Technical data: - Travel X-axis: 7300mm - Travel Y-axis: 1000mm - Travel Z-axis: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis 0-355° freely programmable - Max. processing length without front-side processing: 7300mm - Max. processing length with front-side processing: 6980mm - Tool changer with 10 places and a saw blade holder Bo72Ttwr8E - 9 material clamps - Tool holder SK30 Dcshx Dov Avg Honaijg - 2-layer processing

Condition: excellent (used), Functionality: fully functional, Multi-spindle drilling machine FAPIM TF11 Dcohx Dsv Nzptjnaiog

Condition: excellent (used), Motors 2 x 400 V / 3.0 kW Speed 2.800 U/min Diameter of vertical blade 450 mm Diameter of horizontal blade 400 mm Blade mounting diameter 40 mm Djhx Dnorqzvyeaiecg Undercutting height 153 mm Depth of undercut 110 mm Width of undercut 250 mm Manual feed Weight 400 kg

Year of construction: 2001, Condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable Dehx Dnjt Ea Tfjaiecg - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Condition: good (used), Year of construction: 1989, Functionality: fully functional, We sell an automatic hinge installation device. Device from 1989. Siemens controller and Simatic panel installed on the device in 2015. Hinges were installed on the outer frames of the Wood-Aluminum window with the device. Dcohxju Hxtus Dnaieg Device is in good condition. The price of the device is to be offered by the buyer. Buyer is responsible for transportation and dismantling. If you have any further questions, please contact us about the production equipmen

Condition: good (used), Year of construction: 2010, in a good, working condition. 2 working places, 7,6m length Dcehx Detuvggonaieg

Condition: new, Year of construction: 2024, universally usable due to double adjustable punching body for corner angles with groove dimensions of 25 - 60mm and profile chamber offset 0 - 40mm steplessly height-adjustable feelers, punching knives and backer inserts stylus and punching body are provided with scales retractable abutment for easy insertion of profiles, self-adjusting when moving forward against the profile hydraulic locking of the backer pneumatic pressing operation via a lever system Djhx Dnohmfyheaijcg ensures a synchronous punching process 2 pneumatic hold-down cylinders for clamping the profiles 2 eccentric disks for positioning the frames 2 swiveling profile support arms operation via 2 foot valves incl. standard tools