Used vibrators for sale (59)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Dcedpfexf Up Ujx Ab Asp Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 430 mm Bowl internal height: approx. 100 mm Sorting track width: approx. 12 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Power connection: 230 volts, 50 Hz Dcodszrzygjpfx Ab Aop - Control unit REO Type Reovib RS6 439-459 for adjustable vibration speed Space required: Ø x H: 430 x 390 mm Weight: 52 kg Good condition A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned. 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations, thereby setting the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition Dsdpfx Abexf Urpo Aecp A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Vibratory hopper, dosing hopper, storage hopper, vibratory linear feeder, sorting device Vibratory screw feeder, screw feeder / vibratory feeder Vibratory bowl feeder, screw feeder with vibratory feeder for screw feeding technology Feeding system, feeding device Manufacturer: MÜLLENDERS Type: MLF-G Year of manufacture: approx. 2000 Hopper volume: approx. 18 liters Vibration frequency: 6000 Hz Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power supply). - Control unit REO, type Reovib R6 439, for adjustable vibration speed - Hopper made of stainless steel Space requirement L x W x H: 900 x 300 x 310 mm Weight: 30 kg Dcjdpfsz N H Ebex Ab Aop Good condition

Condition: good (used), Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Electrical power: 220 V Drum diameter: 900mm Adjustable vibration Djdpfsgth U Iex Ab Ascp

Condition: new, Year of construction: 2017, Vibration motor, vibrator motor, oscillating motor, unbalanced motor, shaking motor Dcjdpfx Abegt Awzj Aep Friedrich, Type: F 4000-8-9.0 Max. force: 120,000 N Rotational speed: 740/min Power consumption: 7 kW Dimensions: 1130 x 450 x 465 (L x W x H) Weight: 600 kg

Condition: used, Pneumatic Vibratory Feeder, Explosion-Proof Vibrating Trough, Pneumatic Vibratory Conveyor, Used Machine Manufacturer: NetterVibration Type: Netter NTK Overall dimensions: Width: 950 mm Depth: 430 mm Height: 1340 mm Trough dimensions: Discharge opening size: 155 × 125 mm Width: 670 mm Depth: 420 mm Height: 250 mmPneumatic Vibratory Feeder, Explosion-Proof Vibrating Trough, Pneumatic Vibratory Conveyor, Used Machine Manufacturer: NetterVibration Type: Netter NTK Overall dimensions: Width: 950 mm Depth: 430 mm Height: 1340 mm Trough dimensions: Discharge opening size: 155 × 125 mm Dcedpezat Elefx Ab Asp Width: 670 mm Depth: 420 mm Height: 250 mm

Year of construction: 2024, condition: new, ✔ It is used to transport the material to the horizontal shredders (suitable for Robust LD/H series) ✔ Length: 4000 mm Dedpfx Aogtur Ijb Ajcp ✔ Width: 330 mm ✔ Weight: 470 kg

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Dodpfxju Ailge Ab Aocp Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.