Used Vibrator Jewellery Polish for sale (3,579)

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Dksdpodzqn Dsfx Aqvjn Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 19973, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, overall weight: 320 kg, belt width: 50 mm, grinding belt length: 4,300 mm, Equipment: rotational speed infinitely variable, ✨ 2010 Ciclope Altair 4-2V AP Polishing Machine – For Sale in Ireland (Very Good Condition) Now available in very good condition, this 2010 Ciclope Altair 4-2V AP Polishing Machine offers high-performance surface finishing for demanding metal fabrication environments. Known for precision, durability, and efficiency, this Italian-made industrial polishing system is ideal for stainless steel, aluminium, brass, and a wide range of non-ferrous materials. Whether you're polishing flat plates, tubes, or complex components, the Altair 4-2V AP delivers consistent, high-quality results – perfect for decorative and technical metal finishing. ✅ Key Features – Ciclope Altair 4-2V AP (2010) Year of Manufacture: 2010 Condition: Very Good – Fully tested and operational Model: Altair 4-2V AP Polishing Heads: 1 (Variable Speed) Head Type: Vertical polishing unit with pressure control Motor Power: 3 kW Belt Length: 4300mm Belt Width: 50mm Belt Speeds: 600 to 3000rpm Machine Weight: 320kg Variable Speed Drive (2V): Fine control of polishing intensity Automatic Pressure Control (AP): Consistent contact and finish Application: Surface preparation, finishing, and mirror polishing Build: Heavy-duty welded steel frame with vibration damping Operator Panel: Ergonomic control panel with emergency stop Dust Extraction Ports: Integrated system compatibility 🧰 Applications Sheet metal finishing Tube polishing and deburring Stainless steel and aluminium decorative polishing Dkedpswqrgkofx Aqvsn Precision finishing of architectural and structural components Mirror finishing for high-end applications 📦 Machine Includes Altair 4-2V AP polishing machine base unit Single polishing head with pressure adjustment Electrical control panel Belt mounting system CE-marked safety systems 📍 Located in Ireland – Ready for Immediate Sale This machine is in stock in Ireland, and available for immediate viewing and dispatch. We provide shipping across Ireland, UK, and Europe. 📞 Contact Us Today Looking for reliable and efficient metal polishing equipment? This Ciclope Altair 4-2V AP is a powerful and cost-effective choice for your workshop or production line. Ciclope Altair 4-2V AP Polishing Machine for sale Used Ciclope metal polishing machine Ireland Industrial surface finishing equipment Automatic polishing machine for stainless steel Variable speed polishing machine for metal Sheet and tube polishing system Italian metal polishing equipment in Ireland Metal finishing machine for aluminium and brass Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 22675, type of input current: three-phase, input voltage: 400 V, disc diameter: 300 mm, rotational speed (max.): 3,600 rpm, rotational speed (min.): 600 rpm, overall weight: 410 kg, spindle diameter: 25 mm, wheel diameter: 300 mm, wheel width: 50 mm, Equipment: double-sided, rotational speed infinitely variable, ✨ 2016 Ciclope DBC 400/2-MV Double Ended Polishing Machine – For Sale in Ireland (Very Good Condition) Enhance your metal finishing capabilities with this high-quality Ciclope DBC 400/2-MV Double Ended Polishing Machine, manufactured in 2016 and currently available in very good condition. Built in Italy, Ciclope machines are trusted by professionals across the metal fabrication and surface finishing industries for their durability, precision, and powerful performance. This robust double-ended polishing system is ideal for stainless steel, aluminium, brass, and other metal components. Whether you're polishing flat parts, round tubes, or intricate shapes, the DBC 400/2-MV delivers consistent, high-speed results with minimal vibration and excellent control. ✅ Key Features – Ciclope DBC 400/2-MV (2016) Year of Manufacture: 2016 Condition: Very Good – Fully operational Type: Double-ended polishing machine Motor Power: 2 x 3 kW (per side) Polishing Wheel Diameter: 300 mm Polishing Wheel Width: 50 mm Spindle Diameter: 25mm Spindle Length: 110mm Spindle Speeds: 600 to 3600rpm Spindle Speed: Variable (MV = motovariator model for adjustable speed) Electrical Connection: 3ph/400V/50Hz Machine Weight: 410kg Workpiece Compatibility: Flat and round components, small to medium size Construction: Heavy-duty cast iron base for stability Integrated Tool Rests and Safety Guards Brake: Electronic Brakes and Stop Pedals Electrical Controls: 24V CE certified, user-friendly panel 🧰 Machine Applications High-speed surface finishing of stainless steel and non-ferrous metals Pre-polishing, mirror polishing, or deburring Ideal for fabrication shops, decorative finishing, and precision engineering Dual-head configuration increases throughput and flexibility 📦 Included in Sale Ciclope DBC 400/2-MV polishing unit 2 x polishing spindles with guards Dkedpfxewqrlto Aqvsn Adjustable tool rests Control cabinet and safety system Ready for use in workshop or production line 📍 Available Now in Ireland Located in Ireland, this machine is in stock and available for immediate inspection and delivery. We provide nationwide shipping, with options for UK and European delivery upon request. 📞 Enquire Now Don’t miss this opportunity to own a premium Italian-made polishing machine in excellent working condition. Perfect for professionals who demand reliability and a high-quality finish. Ciclope DBC 400/2-MV for sale in Ireland Double ended polishing machine used Industrial metal polishing machine Ireland Surface finishing equipment for stainless steel Polishing machine with variable speed control Used Ciclope metal polishing machine Heavy-duty polishing grinder for aluminium and brass Mirror finish polishing machine Ireland / UK / Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 20224, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, overall weight: 320 kg, belt width: 50 mm, grinding belt length: 4,300 mm, Equipment: rotational speed infinitely variable, ✨ 2011 Ciclope Altair 4-2V AP Polishing Machine – For Sale in Ireland (Very Good Condition) Dodpfx Aqowqrhuevskn Now available in very good condition, this 2010 Ciclope Altair 4-2V AP Polishing Machine offers high-performance surface finishing for demanding metal fabrication environments. Known for precision, durability, and efficiency, this Italian-made industrial polishing system is ideal for stainless steel, aluminium, brass, and a wide range of non-ferrous materials. Whether you're polishing flat plates, tubes, or complex components, the Altair 4-2V AP delivers consistent, high-quality results – perfect for decorative and technical metal finishing. ✅ Key Features – Ciclope Altair 4-2V AP (2011) Year of Manufacture: 2011 Condition: Very Good – Fully tested and operational Model: Altair 4-2V AP Polishing Heads: 1 (Variable Speed) Head Type: Vertical polishing unit with pressure control Motor Power: 3 kW Belt Length: 4300mm Belt Width: 50mm Belt Speeds: 600 to 3000rpm Machine Weight: 320kg Variable Speed Drive (2V): Fine control of polishing intensity Automatic Pressure Control (AP): Consistent contact and finish Application: Surface preparation, finishing, and mirror polishing Build: Heavy-duty welded steel frame with vibration damping Operator Panel: Ergonomic control panel with emergency stop Dust Extraction Ports: Integrated system compatibility 🧰 Applications Sheet metal finishing Tube polishing and deburring Stainless steel and aluminium decorative polishing Precision finishing of architectural and structural components Mirror finishing for high-end applications 📦 Machine Includes Altair 4-2V AP polishing machine base unit Single polishing head with pressure adjustment Electrical control panel Belt mounting system CE-marked safety systems 📍 Located in Ireland – Ready for Immediate Sale This machine is in stock in Ireland, and available for immediate viewing and dispatch. We provide shipping and setup support across Ireland, UK, and Europe. 📞 Contact Us Today Looking for reliable and efficient metal polishing equipment? This Ciclope Altair 4-2V AP is a powerful and cost-effective choice for your workshop or production line. Ciclope Altair 4-2V AP Polishing Machine for sale Used Ciclope metal polishing machine Ireland Industrial surface finishing equipment Automatic polishing machine for stainless steel Variable speed polishing machine for metal Sheet and tube polishing system Italian metal polishing equipment in Ireland Metal finishing machine for aluminium and brass Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 22735, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, height adjustment type: mechanical, Equipment: rotational speed infinitely variable, type plate available, ✨ 2017 Ciclope ZOE-L High-Speed Belt Polishing Machine – Very Good Condition Boost your metal surface finishing with this 2017 Ciclope ZOE-L High-Speed Belt Polishing Machine, now available in very good condition. Ideal for metalworking, fabrication, and polishing applications, this Italian-built machine delivers reliable high-speed performance, precision, and ease of use. The ZOE-L model is engineered for fast and efficient surface preparation of flat and tubular components, including stainless steel, aluminium, and other non-ferrous metals. ✅ Key Features – Ciclope ZOE-L (2017) Year of Manufacture: 2017 Condition: Very Good – fully functional Polishing Type: High-speed belt polishing (abrasive belt system) Workpiece Compatibility: Flat bars, tubes, and sheet metal Belt Speed: Adjustable high-speed performance Belt Width: 15 mm Belt Length: 610 mm Belt Speed: 600 - 3000 RPM Motor Power: 0.55 kW/0.75 HP Control Panel: Intuitive operator controls with safety stop Dust Extraction Port: Integrated for cleaner operation 🧰 Machine Capabilities Deburring and polishing of flat and curved metal surfaces Surface finishing on stainless steel and aluminium parts Ideal for preparing weld seams and smoothing edges Suitable for architectural, industrial, and decorative applications Rapid belt change system for increased productivity 📦 Included With Machine Ciclope ZOE-L polishing machine unit Safety guards and original electrical controls Integrated dust extraction connection 🏭 Ideal For: Stainless steel and aluminium fabricators Sheet metal processing and deburring Weld seam polishing in industrial production Architectural metal finishing Custom fabrication and surface prep workshops 🚚 Availability & Delivery Dsdpfx Aqewwivvsvokn This machine is in stock and ready for immediate inspection and delivery. We offer shipping across Ireland, UK and Europe. 📞 Enquire Today Looking for a high-performance belt polishing machine in excellent working order? Don’t miss this opportunity to own a Ciclope ZOE-L, trusted across Europe for its performance and durability. Ciclope ZOE-L polishing machine for sale Used high-speed belt polishing machine Industrial metal polishing equipment Deburring and polishing machine for stainless steel Belt sander for flat bar and tube finishing Surface finishing machine for aluminium and metal parts Ciclope finishing machine in very good condition Metal polishing equipment UK / Ireland / Europe Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Wyma Vegetable peeling/polishing line. To consist of; Dkjdpfx Aozaa Iyjqven Dolav bin tipper Wet hopper Vege-peeler with Auger (can have the auger removed for just polishing) Roller inspection table Water recycling unit All machinery is stainless steel. Machinery is decommissioned and ready for shipping

Condition: used, Manufacturer: ItalvibrasModel: CVEM 90 MType: Vibrating conveyor / vibrating channelMaterials: stainless steelPower: 230 VBelt width: 20 cmDimensions: 180 x 75 x 120 cmSold without an electrical control cabinet: a separate quotation can be provided for this Dkjdpfszak H Hex Aqvsn

Condition: excellent (used), Year of construction: 2020, AKE technologies Shaker System for Vehicles Manufacturer: AKE technologies GmbH Type: Shaker System for Vehicles Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled testing conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per lifting table according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Dksdpfozazm Rjx Aqven Vibration Research VibrationVIEW AKE Drive File Manager Unlocked Functions: 8 Input Channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance studies Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. The system has been disassembled and stored. A complete technical functional test under load has not been performed. Scope of Delivery AKE Shaker System for Vehicles Industrial control cabinet Operator computer Installed software High-power shaker units Vehicle wheel mounts Lifting columns with crossbeam Documentation Software media Accessories according to pictures Inspection possible by appointment. Loading can be arranged. All information provided to the best of our knowledge. Errors, changes, and prior sale reserved.

Year of construction: 2014, condition: used, Manufacturer : Sweco Model : MX30S66+C Type: Vibrating sieve Grid diameter : Ø 30" ( ± 76 cm) Year : 2014 Number of separation levels available: 6 (3 installed on the sieve + 3 levels in stock with gaskets) Material : stainless steel Declogging system using balls Motor power : 0,37 KW Grids available: 20 units Dimensions: 100 x 81 x 68 cm Weight : ± 185 Kg. Dodpfxjy Ufiye Aqvokn Video available in running condition

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm Dodpfx Asy Turnjqvekn infeed height: 1.350 mm 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. Djdpfxsya Ahvs Aqvekn The system can be tested at our test center, 20 km from Frankfurt am Main. Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Condition: ready for operation (used), Vibrodynamics sfl 25/4 1.15kw motor seive Dksdexlkutepfx Aqvon

Condition: used, LDS V790 Shaker System LDS V790-335T Air-Cooled Vibrator + LDS HPA-K CE Amplifier + Control and testing accessories Professional electrodynamic vibration testing system Manufacturer: Ling Dynamic Systems Ltd. / LDS Industrial system for environmental simulation and vibration testing For sale is a used LDS V790 vibration testing system from commercial industrial use. The system is suitable for vibration tests, oscillation tests, environmental simulation, research & development, quality assurance, electronics testing, and industrial endurance tests. LDS Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1500 lbf Random force RMS: approx. 6.67 kN / 1500 lbf Half-sine shock force peak: approx. 26.69 kN / 6000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar / 80 psi Optional air isolation approx. 5.52 bar / 80 psi LDS Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: HPA-K Amplifier Model: HPA K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Design: HPA-K CE power amplifier Suitable for LDS V790 Shaker System Weight: approx. 750 kg Control / Accessories According to the pictures, the system includes, among other things: LDS amplifier unit / control cabinet Control and rack units PC workstation with monitor, keyboard and mouse Cables and connection accessories as shown in the pictures Emergency stop units / safety accessories A functional test under load has not been documented. Inspection and testing on site are possible and desired by arrangement. Condition Used industrial system. Optical condition see pictures. Normal signs of wear and storage are present. Some scratches, paint chips, dirt and signs of use are visible. The system comes from commercial industrial use. All information is provided to the best of our knowledge based on the visible nameplates, pictures and available documents. Scope of delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control / rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Available documents / manual Items not explicitly mentioned are not included in the scope of delivery. Scope of delivery exclusively as shown in the pictures or by arrangement. Djdpfx Aoy Uigcoqvekn Transport / Collection Heavy industrial system. Transport only by a suitable freight forwarder or industrial transport. Collection and loading by prior arrangement. Inspection, testing and re-measurement on site are expressly possible after prior arrangement. Notes on sale Sale exclusively to commercial customers. Used goods from industrial use. Sale without guarantee, without warranty and without return. Errors, intermediate sales and technical deviations are subject to change. All technical specifications are without guarantee. We will gladly answer further questions via message.

Condition: ready for operation (used), POLISHING MACHINE - BENCHTOP MODEL Technical data: left polishing disc, diameter: 380 mm Dkodpfxjza Dfps Aqvon right polishing disc, diameter: 280 mm power connection: 380 V/50 Hz

Year of construction: 1998, condition: good (used), machine/vehicle number: PM 1000_01, 1x polishing machines for robot processing sold. Dksdpfsd S R Agjx Aqven Execution 1 x left Manufacturer: SHL polishing wheels DM - 1000 mm drive power 7,5 kW Infeed suction flap

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, V-belt drive, polishing hood polishing wheel: max. Ø 1.000 mm spindle diameter: 45 mm polishing wheel width: max. 150 mm suction connection: mØ 160 mm dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm Weight: approx. 300 kg Dodpfx Aqogxugaevskn Electrical connection: 3 x 400 V, 7.5 kW, IP54

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 500 mm x 100 mm width with 4 kW drive power, V-belt drive, polishing hood Technical data: Polishing wheel: max. Ø 500 mm Dkjdpfx Aqegxughovjn spindle diameter: 35 mm polishing wheel width: max. 100 mm suction connection: Ø 100 mm dimensions (LxWxH): 900 x 600 x 1900 mm weight: approx. 250 kg Connected voltage: 3 x 400 V Connected load: 4 kW

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 500 mm x 100 mm width with 4 kW drive power, infeed, polishing hood. Technical data: Polishing wheel: max. Ø 500 mm spindle diameter: 35 mm polishing wheel width: max. 100 mm infeed: 100 mm suction connection: Ø 100 mm dimensions (LxWxH): 900 x 600 x 1900 mm Weight: approx. 250 kg Dsdogxugtspfx Aqvekn Connected voltage: 3 x 400 V Connected load: 4 kW

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, infeed and oscillation, polishing hood. polishing wheel: max. Ø 1.000 mm spindle diameter: 45 mm polishing wheel width: max. 150 mm infeed: 200 mm oscillation: 50 mm Dkjdpfogxugdsx Aqven Suction connection: Ø 160 mm dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm Weight: approx. 300 kg Electrical connection: 3 x 400 V, 7,5 kW, IP54

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. Dkodpswdnb Rjfx Aqvon With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels - 1 x measuring plate for polishing unit - 1 x control cabinet with PLC The robot and the linear axis have already been sold. If you have any further questions, please feel free to contact us!

Year of construction: 2016, condition: new, machine/vehicle number: 16-PMME-01, It is sold a single-sided polishing machine for manual editing to polishing of parts made of aluminium, steel, stainless steel brass and zinc die-cast. Technical data: Polishing Pad: Max Ø 450 mm Spindle diameter: 35 mm Polishing wheel width: max 50 mm Height 1.100 mm up to the polished shaft Suction connection: Ø 100 mm Dimensions (Lxwxh): 600 x 600 x 1500 mm Weight: 150 kg Supply voltage 3 x 400 V Power: 4 kW Made in Germany Dkedpfx Aqsc Rwngjvjn Warranty: 12 months Optional: Extension with a frequency inverter will cost €950 per polishing machine. 1 piece FU, 1 potentiometer for regulating; 1 main switch

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller Djdpfx Aexby Sgsqvokn - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. If you have any further questions, please feel free to contact us! Dkedoxxv D Hepfx Aqvjn

Condition: used, Year of construction: 2008, functionality: fully functional, Used robotic grinding and polishing system Comprising: Dsdpsyxpmkefx Aqvjkn 1x Yaskawa robot MH165 Payload: 165 kg 1x Belt grinding machine 1x Polishing machine 1x Double sliding table 1x Control cabinet

Condition: used, We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm Dkjdoxlufvopfx Aqven - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!