Used workshop presses for sale (185)

Condition: new, pressure: 120motor power: 4daylight: 1250stroke: 400messurements (LxWxH): 2.050 x 950 x 2.520oil filling: 29performance of pump: 14,5speed: Vorlauf 7,70 mm/sec, Rücklauf 12,63 mm/secweight approx.: 1.300Cylinder: 200Workshop Press: Motor and manual control Fedeiay U Eepfx Ag Ispl Movable cylinder IE3 motors Pump: Hema or Caproni CE-certified Pressure gauge Operating manual included Frame opening (clear width): 1250 × 400 mm

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Stroke: 250 mm Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Fjdpfxed Ab Iqj Ag Iopl Weight: 800 kg EquipmentSteel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English

Condition: new, Technical data: Capacity: 100 t Installation height: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Forward speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Fpedpfx Ajk Nz N Eog Isl Features: - Cylinder with lateral adjustment - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at an extra charge.

Condition: new, Technical data: Capacity: 60 t Installation height: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Forward speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Features: - Cylinder that can be shifted laterally Fsdjk Nz Ndopfx Ag Iepl - Generous working area - Height-adjustable table - Torsion-resistant design made of welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at an extra charge.

Condition: new, pressure: 150stroke: 300column width: 1570working speed: 5retracting speed: 10Workshop Press: Steel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Equipment according to CE regulations, operating manual in German (Sample photo) Specifications: Press force: 150 tons Motor power: 11 kW Stroke: 300 mm Clear distance between columns: 1,570 mm Piston Ø: 280 x 200 mm Fsdpfx Agod Ab Nde Ispl Feed speed: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Length: 2,500 mm Width: 1,000 mm Height: 2,270 mm Weight: 2,100 kg

Condition: new, pressure: 250stroke: 450table length: 1.500performance of pump: 35motor power: 15weight approx.: 2.500Workshop Press: Motor and manual control Laterally movable cylinder Fodpfxsit E N Ue Ag Iepl Hema or Caproni pump Pressure gauge Operating manual included CE-certified Made in Turkey Frame opening (clear width): 1500 × 450 mm

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Fpjdpfjr D U I Dex Ag Iel Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Forward speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Fpjdpfxsk Nz Nts Ag Iel Features: - Cylinder with lateral displacement via rack and pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at an extra charge.

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm Fpodpfx Agjbb Tgus Ijl electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg

Condition: new, Sicmi PSV 70 M - Hydraulic workshop press with a servomechanical handwheel for cylinder adjustment The PSV model is particularly suitable for sheet metal straightening, inserting bushings, or sheet metal inserts. The lowering and raising of the cylinder is controlled by a handwheel with a servomechanism, which allows for adjustment of the cylinder position to within hundredths of a millimeter, thus ensuring absolute precision. The cylinder stroke is 350 mm and exerts a maximum pressure of 270 bar. Since the approach speed of the cylinder is 10 mm/s or less, the operator can operate the electro-hydraulic press with only one hand. The platform is mobile, and its vertical movement is achieved using the main cylinder, which simplifies sheet metal processing and pressing operations. The hydraulic workshop press with a servomechanical handwheel is also available in a version with a transverse cylinder, which allows for transverse movement of the main cylinder using a handwheel. This solution therefore allows you to always work in the center of the cylinder axis, avoiding processes that could damage the hydraulic press. Correct positioning and locking of the cylinder in the desired position is ensured by a specially designed system. Fsdszcphbjpfx Ag Ispl The frame of the PSV hydraulic workshop press is made of an extremely rigid, electro-welded steel construction, which has been specially developed to ensure maximum robustness and stability. Optional equipment: System for preventing cylinder rod torsion Support plates Pair of V-shaped prisms