Used screw compressors for sale (841)

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Gsdpfx Ajzb Idrohnoiw Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 2004, - Data: see the nameplate. Gjdpfx Asy Tndqjhneiw

Condition: excellent (used), Year of construction: 2008, Screw Compressor Giodpfx Ahey Sghfsnsw Manufacturer: Kaeser Model: ASD 32 Year of Manufacture: 2008 Load Hours: approx. 29,050 h Idle Hours: approx. 47,458 h Free Air Delivery: 3.2 m³/h Power: 18.5 kW Pressure: 8 bar Air-cooled, can be converted for heat recovery.

Condition: excellent (used), Year of construction: 2008, Screw Compressor Manufacturer: Kaeser Model: ASD 32 Year of manufacture: 2008 Load hours: approx. 32,337 h Idle hours: 47,455 h Volume flow: 3.2 m³/h Pressure: max. 8 bar Gijdpfx Ahsy Sgguonjw Power: 18.5 kW - Panel damage at rear - Air-cooled, but can be converted to heat recovery

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, Screw Compressor Atlas Copco GA37VSDFF Integrated inverter and dryer 37 kW Gijdpfoy Rva Iex Ahnjw 12.80 bar 7.37 m³/min Year of manufacture: 2012 Operating hours: 72,651

Condition: excellent (used), Year of construction: 2019, operating hours: 10,603 h, functionality: fully functional, Screw compressor Atlas Copco GA45+ 45 kW 7.5 bar 8.90 m3/min Year of manufacture: 2019 Gsdpjy Ru H Tefx Ahnjiw Operating hours: 10,603

Condition: good (used), Code: 0386 Brand: BOTTARINI AIR KRONE - ITALY Model: KS 22 - CE Standard Silenced screw air-compressor with tank and dryer for craft and industry - CE Standard Features: Palletised design, this means that it can be placed anywhere using a simple transpallet. No bolting down is required. Gisdpfx Ahoy Spkijnow Panel-enclosed design that allows for easy access from all sides for routine maintenance Clearly visible and functional control panel features a pressure gauge, air pressure, running time counter, a digital temperature regulator, and a timer. Light on/off button and fault indicator lights Technical data: Motor power 20 Hp 10 Bar 2 m³/min Air delivery 70 CFM Vertical tank 500 liters Dryer Overall dimensions Compressor mm 700 x 700 x 1000 h - 210 kg Overall dimensions Dryer mm 500 x 500 x 600 h - Kg 50

Condition: excellent (used), Year of construction: 2021, operating hours: 40,000 h, functionality: fully functional, Compressor in very good condition. In 2023, the compressor screw was replaced. The compressor is still operational and its functionality can be verified. The machine has been fully serviced by the supplier. Giodpfxey N Dv Us Ahnow

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Gijdpfxsxk U Ale Ahnjw Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2014, power: 14.8 kW (20.12 HP), volume flow: 1.63 m³/h, pressure (max.): 7.75 bar, Atlas Copco SF 15 FF Air Compressor Manufacturer: Atlas Copco Model: SF 15 FF Year of manufacture: 2014 Maximum pressure: 7.75 bar Free air delivery: 4.95 m³/min Air flow: 27.1 l/s, 1.63 m³/min Motor power: 14.8 kW = 20 HP Motor speed: 2,885 rpm Weight: 595 kg Gisdpfsxk U Dcsx Ahnow Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Features: Integrated Workplace Air System™, equipped with SMARTLINK Control: Elektronikon Origin: Made in Belgium No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Gjdpsxk U Arsfx Ahneiw Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside Gedpfx Ajzav Ddehneiw - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: excellent (used), Year of construction: 2018, operating hours: 11,531 h, functionality: fully functional, machine/vehicle number: CD10040145001, overall weight: 1,648 kg, total length: 1,958 mm, total width: 1,138 mm, total height: 1,857 mm, power: 55 kW (74.78 HP), operating pressure: 10 bar, noise level: 69 dB, intake vacuum (max.): 1 mbar, rotational speed (min.): 3,000 rpm, Equipment: type plate available, The CompAir L55 10 W is a reliable and energy-efficient screw compressor with heat recovery designed for continuous compressed air supply in industrial applications. With its robust design and advanced technology, it offers excellent performance and durability, ideal for demanding operating conditions. This model is used but has few operating hours and is therefore in very good condition. Technical details - Serial number CD10040145001 - Year of manufacture 10.2018 - Operating hours 11,531 h - Built-in compressor V3532 - Compression medium: air - Voltage: 400 V / 3 Ph / 50 Hz - Volume flow 9.51 m³/min - Stage pressure 10 bar - Intake pressure 1.0 bar - Full air flow 117 A - Speed 3,000 min-1 Gedpfx Aeunzdkjhnjiw - Engine power 55 kw - Condition: very good For further details see pictures and type plate.

Condition: excellent (used), Year of construction: 2018, operating hours: 8,020 h, functionality: fully functional, machine/vehicle number: S0044420ACB, power: 15 kW (20.39 HP), fuel consumption per hour: 1,750 l/h, operating pressure: 13 bar, Equipment: documentation/manual, type plate available, Machines in very good condition, fully serviced. Giodpfx Ajzaa Akohnow

Condition: excellent (used), Year of construction: 2013, operating hours: 20,493 h, functionality: fully functional, machine/vehicle number: F1311733ACP, power: 22 kW (29.91 HP), operating pressure: 10 bar, Equipment: documentation/manual, type plate available, Machines in good condition, including maintenance. Gsdpfx Ahozaayvjnsiw

Condition: excellent (used), Year of construction: 2010, operating hours: 17,911 h, functionality: fully functional, machine/vehicle number: F1003007, power: 15 kW (20.39 HP), volume flow: 2.17 m³/h, operating pressure: 10 bar, Equipment: documentation/manual, type plate available, Machines with service Godpfxezaaqno Ahnsiw

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: FD202401359, overall weight: 430 kg, total length: 1,550 mm, total width: 750 mm, total height: 1,750 mm, power: 7.5 kW (10.20 HP), volume flow: 1.06 m³/h, pressure (max.): 10 bar, For sale is a well-maintained SCC SMART 7 TD screw compressor, a compact complete compressed air system with an integrated refrigerant dryer. The system is built on a horizontal compressed air tank and is ideal for workshops, production facilities, trades, and industrial compressed air supply. The compressor was manufactured in 2024 and has a motor power of 7.5 kW, a maximum operating pressure of 10 bar, and a volume flow of 1.06 m³/min. Thanks to its compact design with an integrated dryer, the system is space-saving and quickly ready for use. The machine appears very clean and well-maintained visually. Inspection is possible by arrangement. Technical data according to nameplates: Gsdpfx Ahsy Uvxrjnsiw Compressor: Manufacturer: SCC air compressors / Tolpec GmbH Model: SMART 7 TD Year of manufacture: 2024 Serial number: 202314776 Voltage/Frequency: 3~ / 400 V / 50 Hz Max. pressure: 10 bar(g) Motor power: 7.5 kW Total power: 7.66 kW Motor speed: 2915 1/min Volume flow: 1.06 m³/min Weight: 430 kg CE marking present Refrigerant dryer / Additional unit: Model: FD 7 Volume flow: 1.0 m³/min Voltage/Frequency: 220 V / 50 Hz Operating pressure range: 7–16 bar Ambient / inlet temperature: < 47 °C Refrigerant: R134a Serial number: FD202401359 Dew point: faintly legible on the nameplate, presumably 2–10 °C Terms of sale: Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with the exclusion of any liability for defects/warranty. No guarantee is given. Errors and prior sale excepted. Inspection possible by appointment. Sale is from the current location.

Condition: excellent (used), Year of construction: 2012, operating hours: 18,460 h, functionality: fully functional, Screw compressor Alup SCK25-10 18.50 kW Giedpfx Aey Nmg Nehnjw 10 bar 2.62 m3/min Year of manufacture: 2012 Operating hours: 18,460

Condition: excellent (used), Year of construction: 2012, operating hours: 53,348 h, functionality: fully functional, Screw Compressor CompAir L55 55 kW 7.5 bar Gijdoy Nmbmjpfx Ahnow 10.69 m3/min Year of manufacture: 2012 Operating hours: 53,348

Condition: excellent (used), Year of construction: 2004, operating hours: 25,608 h, functionality: fully functional, Screw compressor Atlas Copco GR110 110 kW 20 bar Giodpfx Ahey Nl Rmenjw 12.60 m3/min Year of manufacture: 2004 Operating hours: 64,326

Condition: excellent (used), Year of construction: 2001, operating hours: 44,098 h, functionality: fully functional, Screw compressor Atlas Copco GR110 110 kW Godpfx Asy Nl Irohnoiw 20 bar 12.60 m³/min Year of manufacture: 2001 Operating hours: 44,098

Condition: excellent (used), Year of construction: 2015, operating hours: 19,431 h, functionality: fully functional, Screw compressor Atlas Copco GA22VSD+FF Integrated inverter and dryer 22 kW 12.75 bar Gisdpfx Ahsy Nlqgjnow 4.51 m3/min Year of manufacture: 2015 Operating hours: 19,431

Condition: excellent (used), Year of construction: 2000, volume flow: 1 m³/h, KAESER AIRCENTER SM 11 screw compressor Engine: 7.5 kW Capacity: 1.00 m3/min Godpfxszdrbre Ahneiw Pressure: 10 bar COMPRESSOR IN FULLY WORKING CONDITION.

Condition: used, Year of construction: 1986, operating hours: 2,000 h, functionality: fully functional, overall weight: 630 kg, motor manufacturer: Deutz, volume flow: 1.8 m³/h, Demag SC20DS construction compressor Year of manufacture: 1986 Gisdpfezavnvsx Ahnsw 2,000 operating hours 630 kg 1.8 m³/min 2860 rpm 12.5 kV Deutz 1-cylinder engine: F1/2L 511/W

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, power: 37 kW (50.31 HP), unused Showroom model, immediately available: new screw compressor ALMIG BELT XP 37 - 10 bar Gjdpjy U H N Usfx Ahneiw with Aircontrol Basic control year: 2026 Operating hours: 0 Bh Specifications Type : BELT XP 37 Operating pressure : 10 bar(ue) Flow rate, according to ISO 1217 Annex C : 5.96 m³/min Degree of protection / insulation class drive motor : IP 55/ISO F Nominal power drive motor : 37 kW Operating voltage / frequency : 400/50 V/Hz Sound pressure level (DIN 45635 T.13) : 74 dB(A) Length : 1350 mm Width : 940 mm Height : 1680 mm Weight : 895 kg Compressed air connection : G 1 1/2" Visit our shop in Erlangen. We always have a wide range of new and used compressors in stock.