Used Almig for sale (66)

Condition: new, Year of construction: 2025, operating hours: 1 h, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) include dryer include time drain include 2 filters include 270 liter tank galvanized Year 2025 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 8 270 RD Fpodpfxox Rb D Ss Adaob Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 447 kg Compressed air connection: G 3/4 "

Condition: not inspected (used), Year of construction: 2008, operating hours: 500 h, overall weight: 1,000 kg, Warehouse clearance ALMIG Variable 35 with heat exchanger – hot water Drive power 40 kW The compressor was purchased for a new project and has been stored unused in the warehouse for years. Fedpjx Ifcyofx Adaepb Therefore, no functional guarantee can be given.

Condition: used, Year of construction: 2008, functionality: fully functional, volume flow: 27.5 m³/h, The machine can be inspected at any time. Fodpjxa Eagjfx Adaopb

Condition: used, Year of construction: 2017, feed pressure / bar Fpsdpfexy S H Tox Adaeb liter capacity / l Air consumption / m³/h

Condition: used, Year of construction: 2021, Max. pressure: 16 bar Fedpfxexz Al Nj Adaspb Power: 0.81 kW

Condition: used, Year of construction: 2010, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: F0909926/S0007514, power: 40 kW (54.38 HP), volume flow: 6.05 m³/h, pressure (min.): 5 bar, pressure (max.): 13 bar, Equipment: type plate available, Almig 35 Variable kW 40, still connected for collection. Location: Hildesheim 31137, used with low operating hours. Fpedpfx Ajw Sla Esdasb

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: S0063866, New variable screwcompressor ALMIG Variable XP 45 Fpsdpfx Asxw T Sxedasb Controller: Aircontrol Premium Year 2022 Hours: 1 h good condition, available short. Technical specifications: type: Variable XP 45 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 3.02 to 8.42 m³/min at 6 bar : 3.00 to 8.40 m³/min at 7 bar : 2.98 to 8.38 m³/min at 8 bar : 2.96 to 7.86 m³/min at 9 bar : 2.95 to 7.08 m³/min at 10 bar : 2.93 to 7.02 m³/min at 11 bar : 2.90 to 6.26 m³/min at 12 bar : 2.85 to 6.23 m³/min at 13 bar : 2.82 to 5.92 m³/min Installed power: 45 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 72 dB (A) Compressed air connection: G 2" Dimensions and weight Length : 2000 mm Width : 1250 mm Height : 1750 mm Weight : 1555 kg Visit our store. We´ve got a lot of compressors and dryers on stock.

Condition: excellent (used), Year of construction: 2016, operating hours: 42,734 h, functionality: fully functional, Almig Variable 55 premium screw compressor. 55 kW, 13 bar. Fpodpfxjufhvyj Adajb 10.58 m3/min Frequency controlled.

Condition: good (used), Year of construction: 2012, Almig Variable 35 Screw Compressor Fpsdpfx Adjwmkxdoajb Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped, and variable speed. Discharge pressure: 13.00 bar Motor power: 40.00 kW Free air delivery: 1.00 - 6.05 m³/min

Condition: good (used), Year of construction: 2008, operating hours: 69,792 h, overall weight: 3,900 kg, power: 160 kW (217.54 HP), operating pressure: 11 bar, Equipment: type plate available, ALMiG Direct 160 screw compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 160 Year of construction 2008 Operating overpressure 11.5 bar Motor output 160 kW Volume flow according to ISO 1217 (Annex C-1996): 23,29 m3/min Length 2700 mm Width 1686 mm Height 1888 mm Weight 3900 kg Operating hours 69792 h Fpedpettuccjfx Adaeb Load hours: 57442 h Downtime hours 4015 h Total delivery volume 10773418 m³ You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2018, ALMIG Variable 90 screw compressor, no. S0050145, year of manufacture 2018, 100 kW Fjdpfxjunwf Ds Adajpb

Condition: as good as new (ex-display), Year of construction: 2021, Screw compressor ALMIG GEAR XP 75 - 8 bar (air cooled) Year 2021 / IMMEDIATELY AVAILABLE! Fodpfx Aoxw T Sledajpb Technical specifications Type: GEAR XP 75 Operating pressure: 8 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 12,80 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 75 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 76 dB (A) Length: 2180 mm Width: 1330 mm Height: 1850 mm Weight: 2025 kg Compressed air connection: G 2 "

Condition: like new (used), Year of construction: 2015, operating hours: 12,022 h, functionality: fully functional, Almig screw compressor, as new condition. Year of manufacture 2015 with around 12,000 hours. 15 kW, 10 bar with 1.98 m3/min. Fodpfx Adsw A Sb Soaepb

Condition: good (used), Year of construction: 2014, Almig ALM260 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Fpodpfx Ajwhwlysdaob Flow rate: 4,00 m³/min

Condition: good (used), Year of construction: 2012, operating hours: 59,793 h, overall weight: 3,500 kg, ALMiG Variable 150 screw compressor The Variable series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These variable speed compressors are particularly suitable for use as alternating load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation SCD motor - highly efficient drive motor, protection class IP 55, optimum efficiency of up to 96% SCD direct drive - loss-free power transmission, maximum cost savings Air End - outstanding efficiency across the entire control range Cooling unit - large-area coolers for extremely low compressed air outlet temperatures and optimum thermostat-controlled coolant temperatures Fan - powerful, efficient, high-performance ALMiG Variable 150 Year of construction 2012 Fsdpfsttub Uex Adaspb Operating overpressure 5-13 bar Motor power 150 kW Volume flow in accordance with ISO 1217 (Annex C-1996): min 9.40 / max 27.25 Length 2700 mm Width 1686 mm Height 1888 mm Weight 3500 kg Operating hours 59793 h Load hours: 54679 h Downtime hours 19454 h Total delivery volume 62068260 m³ You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2025, New speed controlled ALMIG LENTO 37 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control P Technical specifications Type: LENTO 37 LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 12 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,41 / 6,67 m³/min at 6 bar min/max : 1,40 / 6,41 m³/min at 7 bar min/max : 1,39 / 6,14 m³/min at 8 bar min/max : 1,38 to 5,86 m³/min at 9 bar min/max : 1,37 to 5,60 m³/min Fpedpfxsh Unqaj Adaob at 10 bar min/max : 1,35 to 5,34 m³/min at 11 bar min/max : 1,34 to 5,09 m³/min at 12 bar min/max : 1,33 to 4,48 m³/min elektric motor power: 37 kW Operating voltage / frequency: 380 V / 41/148 Hz Residual oil content: 0 mg / m³ SPL: 50% load: 74 dB (A) 100% load: 77 dB (A) Length: 2300 mm Width: 1400 mm Height: 2265 mm Weight: 1650 kg Compressed air connection: G 1 1/2" inch

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Fpedettucgopfx Adaeb Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 75 Year of construction 2010 Final pressure 11 bar Motor output 75 kW Volume flow according to ISO 1217 (Annex C-1996):11.58 m3/min Length 2300 mm Width 1400 mm Height 1860 mm Weight 1970 kg Operating hours 7637 h Load hours: 6317 h Downtime hours 167714 Total delivery volume 4506000 m³ You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 15 (5 to 13 bar) include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 15 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.50 to 2.49 m³/min at 6 bar (g): 0.48 to 2.41 m³/min at 7 bar (g) : 0.48 to 2.32 m³/min at 8 bar (g) : 0.45 to 2.23 m³/min at 9 bar (g) : 0.45 to 2.12 m³/min at 10 bar (g) : 0.45 to 2.02 m³/min at 11 bar (g) : 0.45 to 1.90 m³/min at 12 bar (g) : 0.44 to 1.80 m³/min at 13 bar (g) : 0.43 to 1.69 m³/min Nominal power drive motor: 15 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400V/85-400 Hz Compressed air connection: 3/4“ G Length: 691 mm Width: 1051 mm Height: 1088 mm Fjdpjxwb Rpsfx Adaspb Weight: 410 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 screw compressor The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is virtually loss-free with an efficiency of > 98% and is gentle on the drive. In addition, highly efficient separation of the cooling medium enables a minimum residual oil content of just 2-3 mg/m³. The encapsulated design of the gear set makes these systems ideal for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with high power reserves Virtually loss-free concept with efficiency > 98% Maintenance and service-friendly drive concept ALMiG Gear 132 Fpsdsttv Ibopfx Adaeb Year of manufacture 2011 Final pressure 10 bar Motor power 132 kW Volume flow : 18,04 Length 2800 mm Width 1400 mm Height 2025 mm Weight 3830 kg Operating hours 10337 h Load hours: 9378 h Downtime hours 13887 h Total delivery volume 11333000 m³ You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2025, operating hours: 11 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 11-270D (5 to 13 bar) include Dryer with time controlled drain Fedpsw Duytsfx Adaopb include 2 air filters include 270 liter tank include controller Air Control Base Year of construction: 2025 Operatin hours: 5 Technical specifications Type: Combi XP 11-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.30 to 2.00 m³/min at 6 bar (g): 0.30 to 1.89 m³/min at 7 bar (g) : 0.30 to 1.78 m³/min at 8 bar (g) : 0.29 to 1.67 m³/min at 9 bar (g) : 0.29 to 1.57 m³/min at 10 bar (g) : 0.29 to 1.46 m³/min at 11 bar (g) : 0.28 to 1.36 m³/min at 12 bar (g) : 0.28 to 1.24 m³/min at 13 bar (g) : 0.27 to 1.17 m³/min Nominal power drive motor: 11 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/60-315/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 1530 mm Width: 700 mm Height: 1640 mm Weight: 590 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Year of construction: 2008, operating hours: 45,000 h, Used, oil-free, variable 55 kW screw compressor ALMIG LENTO 55 WK (water-cooled) The compressor is in good, neat condition. Year of construction: 2008 Operating hours: 45,000 operating hours Technical specifications Type: LENTO 55 WK Possible operating pressures of the system (continuously adjustable): 5 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C: at 5 bar min / max: 1.41 / 7.79 m³ / min at 6 bar min / max: 1.40 / 7.74 ​​m³ / min at 7 bar min / max: 1.39 / 7.69 m³ / min at 8 bar min / max: 1.38 / 7.64 m³ / min at 9 bar min / max: 1.37 / 7.59 m³ / min at 10 bar min / max: 1.35 / 7.29 m³ / min Rated power drive motor: 55 kW Degree of protection / insulation class of drive motor: IE 3 Protection / insulation class fan motor: IP 54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Cooling water requirement at 100% load (with inlet + 15 ° / delta t = 15 K): 55 l / min Fpsdpegkbfhjfx Adaeb Cooling water supply (min / max): 5/35 ° C Cooling water outlet (max): 45 ° C Cooling water pressure (min / max): 4/10 bar Cooling water volume (min / max): 140 l / min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point refrigeration dryer 50% load: 3 ° C 100% load: 3 ° C Sound pressure level (DIN 45635 part 13) soundproofed, at 50% load: 64 dB (A) 100% load: 73 dB (A) Length: 2,300 mm Width: 1,400 mm Height: 1,560 mm Weight: 1,590 kg Compressed air connection: G 1 1/2 inches Visit our shop, we always have a large number of new and used compressors in stock.

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Fpjdpfx Adoxud Eqsasb Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Fpjdpfx Adjc Rt D Njaeb Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 8 (5 to 13 bar) include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 8 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.17 to 1.43 m³/min at 6 bar (g): 0.17 to 1.35 m³/min at 7 bar (g) : 0.17 to 1.25 m³/min Fpsdpfx Adexqn Afsasb at 8 bar (g) : 0.17 to 1.16 m³/min at 9 bar (g) : 0.17 to 1.07 m³/min at 10 bar (g) : 0.17 to 0.98 m³/min at 11 bar (g) : 0.17 to 0.89 m³/min at 12 bar (g) : 0.16 to 0.83 m³/min at 13 bar (g) : 0.16 to 0.75 m³/min Nominal power drive motor: 7,5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/42-230 V / Hz Compressed air connection: 3/4“ G Length: 691 mm Width: 1051 mm Height: 1088 mm Weight: 350 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: AL2025030096, ALMIG BELT XP 18 screw compressor - 10 bar (air-cooled) Display unit with minor paint damage (see photo) Controller: ACB Model year 2025 / IMMEDIATELY AVAILABLE! Technical Specifications Type: BELT XP 18 Operating pressure: 10 bar(ue) Fpodpfx Adexpw Uzsajb Delivery volume, according to ISO 1217 Appendix C: 2.77 m³/min Protection class/insulation class of drive motor: IP 55/ISO F Rated power of drive motor: 18.5 kW Operating voltage/frequency: 400/50 V/Hz Sound pressure level (DIN 45635 T.13): 73 dB(A) Length: 1250 mm Width: 880 mm Height: 1515 mm Weight: 653 kg Compressed air connection: G 1"