Used Sand blasting equipment for sale (133)

Condition: used, Year of construction: 2005, Sandblasting machine, blasting machine, sandblasting cabin, sandblasting device -Manufacturer: Güde, blasting system sandblasting cabin type P1 -Interior: 580/480/H295/350 mm -Air requirement: 150 l/min / pressure 6 bar -Dimensions: 690/480/H490 mm Cgjlroryak Tod U Dnjt -Total weight: 38 kg

Condition: reconditioned (used), Year of construction: 1990, Functionality: fully functional, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS model Type: CM S 3370 Specification Maximum product dimensions: Maximum product height: 1,500 mm (measured at the bottom of the hook) Maximum diameter: Ø 1,200 mm Maximum weight: 700 kg Cgeleu Iy Ipjrd U Dnst Equipment Load hook: 2x Turbines: 3x Ø 330 mm, 6 blades Turbine speed: 1,450 // 950 rpm Turbine output: 5.7 kW // 4.1 kW (Dahlander motors) Mechanical control Hook displacement: manual Hook infeed: mechanical Door operation: mechanical Mechanical overhaul Motors and drives completely overhauled and fitted with new seals Cab overhauled with sheet metal and doors, prepared for manganese steel armor plates (hook iron available); with original rubber coating as standard, optionally with manganese steel armoring Augers replaced and fitted with HARDOX augers Auger bearings replaced Radiant elevator fitted with new elevator belt, return sprockets and bearings Chain drives and sprockets replaced Hook feed system modernized Hook drive system completely overhauled Compressed air supply replaced Compressed air cylinders and valves renewed/overhauled Turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical overhaul Turbine control: 3x turbines Ø 330 mm with 2 speed controls (Dahlander motors) The electric motors were overhauled, rewired and tested; motor brand: Siemens. Electrical control system replaced with SIEMENS S7-1200 control system and control panel Control panel with renewed relays, compliant with 2023 standard SKF servo-controlled abrasive supply system: abrasive supply infinitely adjustable via control panel for 2-speed blasting operation Safety system with PILZ safety sensors and emergency stop circuit on the turbine housings The machine can be fully tested (empty without abrasive).

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber Cjlrdellvr De U Dnegt - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Condition: ready for operation (used), We offer 4 pieces of reconditioned Schlick turbines, 320 mm, including 7.5kW motors. The price listed is for 4 pieces complete. Cjlrd Uevphf Ue Dnegt Price for 1 piece - 3000 Eur.

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Cgslrd U Dskw Ukuenot Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: new, Year of construction: 2024, Functionality: fully functional, air demand: 1.13 m³/h, pressure: 7 bar, warranty duration: 24 months, total width: 1,370 mm, total height: 2,080 mm, total length: 1,150 mm, overall weight: 350 kg, Equipment: cabin, lighting, Machine type: Vapormatt PUMA Manufacturer: Vapormatt In contrast to sandblasting, wet blasting, or VaporBlast, adds another element to the treatment: Water. This optimizes the surface treatment and makes it possible to achieve even smoother and more even surfaces. The Vapormatt PUMA is a high-quality and versatile manual wet blast cabinet from Vapormatt, who invented the wet blasting process in the 1950s. Over 70 years of further development in wet blasting has resulted in an ergonomic and economical system, the Vapormatt PUMA. Small series parts can be processed using an insertable basket, and a clamping device for rims makes it possible to process these. Even large workpieces weighing up to 50 kg can be placed on the robust stainless steel grid. Cgsljtqmh Eerd U Dnjt The integrated water circulation system ensures that consumables are used sparingly. Further technical information can be found in the brochure. The price quoted is net plus the currently applicable statutory VAT and plus freight costs. The pictures may show the system including accessories, which are optionally available and incur additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). The offer serves exclusively as an internet presentation of our goods. The contract is negotiated by means of telecommunications (email, telephone, message portal). In the first step, we make you a non-binding offer, with which we also inform you about our general terms and conditions with imprint and the right of withdrawal before the purchase/contract is concluded.

Condition: used, Sandblasting system, blasting system, sandblasting cabin, rotating basket system -Sale/sale: in current condition as seen -Attachment: Accessories are missing, individual components see photos -Blasting system: Type Exactomat 2 G - 60 -Volume flow: 26.2 m³/h -Dimensions: 830/580/H1730 mm Colrd Uoqcyzws Dnegt -Total weight: 296 kg

Condition: used, Year of construction: 2005, 0 1250 x 1200 x 1100 mm operating pressure 2,5 - 8,0 bar dimensions 2,0 x 1,8 x 2,5 m Cgslrdju Aw I Ns U Dnst air consumption at 6 bar l/min weight of the machine ca. 1,5 t

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Celrsrq Hmzsd U Dnegt Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: used, Year of construction: 2004, surface of working table 1000*900 (*900) mm Colrd U Deuddrhjnsgt tank ca. 350 l accessories and equipment: Absaugung mit Filter total power requirement ? kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,4 * 1,4 * 2 m

Condition: excellent (used), Rubber belt blasting system, top condition Cslrdsud Samo U Dnjgt

Year of construction: 2022, Condition: as good as new (ex-display), Demonstration machine from our showroom in Stuttgart. The machine is immediately available. Celrd U Dehur Drenjgt More operating hours can be added as the machine is used for demonstration purposes. Sandmaster 115IN injector blast machine including integrated exhaust system Blasting media grain size Mesh 16 - 280 Integrated filter system (filter area 4.8 m2) Working area 1150 x 800 x 840 mm (W x D x H) Dimensions 1315 x 1210 x 1885 mm (W x D x H) Power consumption 550 W, 230 V 50 / 60 Hz Price ex works Stuttgart plus transport . Commissioning possible for an additional charge we will be pleased to make you an offer

Condition: new, 0 199,5 x 67,5 x 64 mm operating pressure 2,5 - 8,0 bar air consumption at 6 bar 350 l/min weight of the machine ca. 0,23 t dimensions 2,10 x 1,30 x 0,88 m Duo blast cabinet 10 PET sheets to protect the windows 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns Colrd U Doupxfzsnogt 6 ceramic nozzle inserts (6 mm diameter)

Condition: used, Year of construction: 2012, machine/vehicle number: DHT 05-15-3.6-08-07,5, Machine no.: 181174 Manufacturer: AGTOS Type: Continuous overhead conveyor blast machine Designation: DHT 05-15-3.6-08-07,5 Turbines: 8 turbines with 7.5 kW Extraction air volume: 7500 m³/h Cslrd Uorq Hd Sj Dnjgt Year of construction: 2012 Other details: Characteristics of the installed filter system Residual dust content with secondary filter: ≤ 2 mg/Nm³ Type: Dry dedusting system Characteristics of the blasting system Blasting media (material and size): Steel abrasive Abrasive quantity (initial filling): 5 tons Workpiece material: Steel Max. Workpiece length: 1400 mm Passage width: 500 mm Passage height: 1500 mm Sound pressure level without sound insulation: ≤ 85 dB(A

Condition: excellent (used), Year of construction: 2013, WIRE BELT BLAST MACHINE BRAND : OMSG WIRE BELT BLAST MACHINE BRAND : OMSG Brand: OMSG Type: CWB 1100 4-T Year: 2013 Belt Width : 1.100mm Turbine: 4 Pieces Filter: No With 13m outlet belt table .. Cgeletphzlerd U Dnjt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Preis: Verladen auf LKW 5Price: Loading on Truck Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Lieferung in Ihr Werk: Montage / Inbetriebnahme / Schulung Richtmeistermontage

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m Cgslrsupxd Dsd U Dnot air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t

Condition: used, Year of construction: 2009, Functionality: fully functional, machine/vehicle number: RMBC 1.1, Machine no.: 181072 Manufacturer: Rösler Type: Troughed belt blasting machine Designation: RMBC 1.1 Turbines: 1 turbine with 7.5 kW Cartridge filter: Used cartridge filter system Year of construction: 2009 Batch volume: 100 l Cjlrd U Dsrq Hdconsgt max. batch weight: 300 kg Other details: Feeder: used, available, incl. loading conveyor and weighing device Vibrating discharge chute: used, available

Year of construction: 2013, Condition: excellent (used), WIRE BELT BLAST MACHINE BRAND : OMSG WIRE BELT BLAST MACHINE BRAND : OMSG Brand: OMSG Type: CWB 1100 4-T Year: 2013 Belt Width : 1.100mm Turbine: 4 Pieces Filter: No With 13m outlet belt table .. Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Cgjlrd U Dem Uyxqonet Preis: Verladen auf LKW 5Price: Loading on Truck Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Lieferung in Ihr Werk: Montage / Inbetriebnahme / Schulung Richtmeistermontage

Condition: new, 0 1170 x 880 x 825 mm operating pressure 2,5 - 8,0 bar dimensions 1,33 x 1,24 x 1,77 m Cgjlrd U Doupxdwonjt air consumption at 6 bar 350 l/min weight of the machine ca. 0,16 t

Year of construction: 2022, Condition: new, New Spare parts Rösler Roesler Turbine H42 Blade H42 99501010 G 300033085 Blade H32 99501035 300033354 Blade H 28 99501015 300129471 Impeller 99505016 300129472 Control Gate 99505017 300129473 Rösler Strahlanlage NEW Spare parts for all Hurricane H42 H32 H28 Wurfschaufel H42 Impeller H42 / H32 H28 Verteiler H42 H32 H28 Cgslrd U Dsctguionot We can offert for spare Parts for Rösler, Shot Blasting Machines! Spareparts for Rösler Turbine H42 H32 H28

Condition: new, 0 945 x 605 x 605 mm operating pressure 2,2 - 5,5 bar Cgelrdjupw Sms U Dnet dimensions 1,0 x 0,61 x 1,65 m 1300 x 1000 x 750 cm Air consumption 250 l/min. weight of the machine ca. 0,09 t

Year of construction: 2022, Condition: new, New Spare parts Rösler Roesler Turbine H42 Blade H42 99501010 G 300033085 Blade H32 99501035 300033354 Blade H 28 99501015 300129471 Impeller 99505016 300129472 Control Gate 99505017 300129473 Rösler Strahlanlage NEW Spare parts for all Hurricane H42 H32 H28 Wurfschaufel H42 Impeller H42 / H32 H28 Cgslrd U Doctgubsnst Verteiler H42 H32 H28 We can offert for spare Parts for Rösler, Shot Blasting Machines! Spare parts for Rösler Turbine H28 H32 H42

Condition: new, 0 830 x 530 x 530 mm operating pressure 2,2 - 5,5 bar Air consumption 250 l/min. weight of the machine ca. 50 Kg Cgjlreupw Sgjd U Dnst 0,95 x 0,65 x ,7 cm

Condition: new, Receiver capacity 2 x 37 l working pressure 4 - 8 bar Air consumption 170 - 500 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Cjljfv Au Asrd U Dnsgt Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.

Condition: new, Receiver capacity 80 l working pressure 4 - 8 bar Air consumption 250 - 800 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile jet unit with extraction Consisting of: microfilter Celrd Uof Nb Eue Dnogt Boiler 80 liters Blasting gun with 2.5m supply hose