Used roller conveyors for sale (503)

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, plate length: 2,800 mm, plate width: 1,300 mm, TECHNICAL DETAILS Max. panel width: 1,300 mm Max. panel length: 2,800 mm EQUIPMENT 180-degree panel tilting system Hfedpfx Aaoyq E S Sjljd The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6327

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs Hfodsyug R Rjpfx Aaled • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, Year of construction: 2009, functionality: fully functional, Equipment: type plate available, Roller Conveyor / 90-Degree Roller Conveyor Curve Manufacturer: Costo Year of manufacture: 2009 Condition: Used Model: 90-degree curve Total outside width: approx. 2250 mm Total inside width: approx. 1140 mm Overall width: approx. 800 mm Conveying width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Available stock: 2 units Price per unit Condition: Fully functional, with signs of wear Feet must be ordered separately Material: Steel Ideal for fast material handling Professionally dismantled and packed Internal item number: 2026031202 The conveyor system was in operation until dismantling. Thanks to the excellent workmanship of the conveyor, your material glides smoothly to its destination—even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We would be happy to provide you with a tailored offer or advise you on layout and assembly. Simply let us know your requirements and on-site conditions. Hfjdpfx Aajyt I R Nolod Benefit from our many years of experience and our outstanding network of experts. We have already successfully completed projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together we will develop solutions to optimize your workflow and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or additional components such as order picking racks or containers.

Condition: good (used), Included in the delivery: 01x Standard separation bar, used Material color: Sendzimir galvanized Total length: approx. 2,440 mm Separation bar length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Hjdpfx Aaeyk E T Nsljfd Profile: 25 x 35 mm (H x W) Single-sided protective cap Weight per piece: approx. 2.19 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should transport or shipping be required, additional costs will apply. These can be queried separately with us, depending on the delivery location or scope of delivery.

Condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Soco System Condition: Used Model/Type: Rollers Drive type: Gravity System consisting of: 7 segments (5 x 1.980 mm, 2 x 960 mm) total length: approx. 11.820 mm Hsdpfxsi Dt Epj Aalsfd Total width: approx. 470 mm Conveyor width/roller width: approx. 410 mm Segment length: approx. 1,980 mm Roller diameter: approx. 50 mm/rollers made of plastic Axle distance: approx. 90 mm (adjustable) Material: steel/plastic Frame data: Height: approx. 100 mm width: approx. 25 mm Stock: 11,82 meters Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material will glide smoothly to its destination, even under heavy load. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 160 mm, total width: 910 mm, total height: 115 mm, total length: 2,515 mm, conveying length: 2,500 mm, construction width: 910 mm, construction height: 115 mm, overall weight: 80 kg, Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 2,515 x 910 x 115 Width including side rail in mm: 900 Side rail height in mm: 75 Hfjdpfxoyufakj Aalsd Conveyor length in mm: 2,500 Conveyor width in mm: 860 Conveyor height in mm: 130 Roller pitch in mm: 160 Substructure: none Support roller axle type: steel, screw-in rollers Support roller diameter in mm: 50 Support rollers per axle: 1 Support roller material: steel Drive: gravity Net weight in kg: 80 Special features: 3-section feed/discharge Condition: used / fully functional Functional test: OK

Condition: good (used), Features: Used roller conveyor flap element Condition: fully functional with traces of use Hfedpfxsfgwh Ao Aaled professionally disassembled and packed Price per piece Technical data: Dimensions of the folding element Total length: 1.180 mm Total width incl. feet approx.: 670 mm Conveyor width: 460 mm Min. height upper edge roller: 570 mm Distance between axes: 75 mm Roller diameter: 50 mm Stock: 1 piece Price per piece Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Hedpfsu Uwygex Aalefd Good condition

Condition: used, Turning station RITTAL / E SYS-K System GmbH Hfsdpfjv Tdkbox Aalod Automated turner for packaging made from ALU system profile Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Weight of turning device: 730 kg As-new condition

Condition: used, Heavy-duty roller conveyor with steel support rollers Year of manufacture: approx. 2000 Roller conveyor length: 4950 mm Usable width = roller width: 485 mm Total conveyor width: 580 mm Conveyor height: 950 mm Number of rollers: 7 pcs Roller pitch: 850 to 620 mm (center to center) Roller diameter: Ø 90 mm Axle diameter: Ø 20 mm - Very robust construction made of angle steel 130 x 65 x 8 mm Transport dimensions: length 4950 mm, width 580 mm, height: 950 mm Net weight: 360 kg Hfjdpfx Aow E Nwpjaled In good condition

Condition: used, Year of construction: 2009, machine/vehicle number: 0701-250008, Rösler roller conveyor for the longitudinal transportation of profiles and sheet metal. This stable roller conveyor system is suitable for transporting materials in the steel trade or steel construction. The roller conveyor is 9.60 m long. The roller conveyor is powered and was used as a connecting roller conveyor between a Rösler blasting system and a Kaltenbach drilling saw system for transporting steel profiles and steel sheets. The height of the Rösler roller conveyor is 640 mm and the roller width is 2700 mm. The diameter of the transport rollers is 140 mm. Hfedpfx Aajyild Ajlod Cross tractors are also available as a lifting carriage system on request at an extra charge.

Condition: good (used), Year of construction: 2022, functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 111 mm, total width: 880 mm, total height: 150 mm, total length: 2,030 mm, construction width: 880 mm, construction height: 150 mm, input voltage: 24 V, overall weight: 60 kg, TAF item number: 1000006126 Manufacturer: TAF Industriesysteme Year of manufacture: 2022 Overall dimensions (LxWxH) in mm: 2,030 x 880 x 150 Width incl. side panel in mm: 680 Side height in mm: 140 Conveyor width in mm: 600 Conveyor height in mm: 150 Curve (degrees): 90 Curve radius, inside in mm: 800 Curve radius, outside in mm: 1,436 Support roller axle type: M8 internal thread Support roller diameter in mm: 50, conical on the outside Support roller per axle: 1 Support roller material: steel, galvanised, with plastic Roller pitch, inside in mm: 62 Roller pitch, outside in mm: 111 Drive: 24 V motor roller (2 pieces) Motor manufacturer: Kyowa Puls Roller Motor data: 45 ZMHT, 40 W power Motor position: left or right Control: EQube Ai P (24V binary control) Conveyor speed in m/s: 0.2 - 0.8 Net weight in kg: 60 Condition: used / fully functional Hfedpfsytf Rtjx Aaled Function test: OK

Condition: excellent (used), 1 piece approx. 1,000 x 1,850 mm 3 pieces approx. 1,000 x 3,300 mm with drive and existing cabinet Hsdpfev S Efdsx Aalefd

Condition: used, Year of construction: 2006, functionality: fully functional, Used pallet roller conveyor system consisting of 7 driven sections: Euroroll GmbH 3.60.2.3.KF Total conveyor length: 13.23 m (2x 1.28 m; 1x 1.42 m; 1x 2.10 m; 2x 2.45 m; 1x 2.25 m) Roller width: 0.85 m Outer/nominal width: 1.10 m Hfodpfx Aeytcdwealod Frame height: 0.17 m suitable for pallet weight up to 400 kg

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: Syst.no. 105, Used roller conveyor from the manufacturer Mannesmann Demag 3m straight pieces, come from a 2-story transport system. 1 piece 3m long; Negotiable price for larger purchase quantities!! Other parts also available, please ask. Hodpfx Aaswliuzslsfd

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: Syst.no. 105, Complete package: used roller conveyor system by Mannesmann Demag Hfjdpfexv Df Tex Aalod Comprises 50x 3m straight non-driven sections, 20x 45° bends, 10 driven sections with rubber surface, numerous supports and guides, and 3 separate driven curves. The components are 50 cm wide. All components originate from a cosmetics factory. The system spanned two floors, and the corresponding documentation is included. Individual selection of components is also possible. Additionally, several boxes of spare parts are available.

Condition: ready for operation (used), rolls for rollertables Hjdpfxow Uqgij Aalsfd *Rolls with size: 250mm x 40 mm SW 8 5000 pieces in Stock. *Rolls with size: 315mm x 63,5 mm SW 8 5000 pieces in Stock.

Condition: ready for operation (used), 50 pieces Rollertables Length 2200-3000 mm Width 500 mm Hedpfxji A Awqs Aalefd

Condition: ready for operation (used), Rolls for Rollertables Rolls with size: 500mm x 89mm SW 14 Hfodpfx Asi A Awujaled Price : €11 a Piece 2200 pieces in Stock.

Condition: good (used), functionality: fully functional, roll diameter: 60 mm, roll width: 855 mm, total width: 880 mm, total length: 2,120 mm, conveying length: 2,120 mm, axle spacing: 125 mm, frame height: 80 mm, Pallet feed element/ pallet roller conveyor Manufacturer: BITO Condition: Used Model/Type: Rollers Total length: approx. 2120 mm Total width: approx. 880 mm Conveyor width/ roller width: approx. 855 mm Roller diameter: approx. 60 mm Center distance: approx. 125/145 mm Frame: Steel/ Galvanized Frame height: approx. 80 mm Including one brake roller per piece (diameter: approx. 80 mm) Stock: 6 pieces Price per piece Feet to be ordered separately Feet to be ordered separately Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Hfodpfouh Tf Esx Aalod The conveyor technology has run until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as picking racks or containers.

Condition: good (used), 3 pieces Soco roller conveyor galvanized steel version with approx. 2 m length and 3 pieces with approx. 1 m length. -Usable width approx. 0.50 m. Hfedoh E Tn Dspfx Aalod -Adjustable in height and inclination.

Condition: good (used), Features: * Used pallet roller conveyor of the manufacturer Bito. * Condition: used * Color: galvanized * Professionally disassembled and packed * Stock approx. 62 meters * Price per meter Hfsdpfx Asfw Nfzealsd Technical data Plant consists of 28 segments 8 x segments x approx. 2600 mm long 4 x segments x approx. 2,495 mm long 16 x segments x approx. 2,000 mm long Total width: approx. 880 mm Roll width: approx. 855 mm Conveyor width: : approx. 870 mm center distance: approx. 70 to 95 mm Roller cross section: 60 mm Material: steel/ galvanized Height frame: ca.110 mm There are 3 to 4 brake rollers per segment. Roller diameter: 80 mm Pallet roller conveyor Due to the excellent workmanship of the pallet roller conveyor, your material will glide smoothly to its destination, even under heavy load. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We would be pleased to make you an individual offer or to advise you on conception or assembly questions. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, Year of construction: 2023, functionality: fully functional, roll width: 465 mm, total width: 540 mm, total length: 3,250 mm, conveying length: 3,250 mm, power: 0.37 kW (0.50 HP), axle spacing: 125 mm, frame height: 120 mm, frame width: 35 mm, Powered Roller Conveyor / Work Table / Conveyor Technology Model: Flat Belt Condition: Used Year of manufacture: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 3,250 mm Total width: approx. 540 mm Conveyor width: approx. 465 mm Roller/shaft pitch: approx. 125 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Color: Light grey Includes 2 SEW motors (0.37 kW) Includes side guides Feet must be ordered separately Available stock: 10 units Price per unit Internal item number: 2026021902 Features: Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was operational up until dismantling. Thanks to the excellent craftsmanship of the conveyor technology, your material glides smoothly to its destination—even under heavy loads. Tailor-made solutions for your intralogistics Hjdjylmi Uspfx Aalofd Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods—we are your competent partner! We are happy to provide you with a customized quote or advise you on design and installation questions. Simply inform us of your requirements and local conditions. Benefit from our many years of experience and outstanding network of industry professionals. We have successfully realized projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, and electronics. Together we will find ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automated sorting technology or additional components such as picking shelves or containers.

Condition: used, gebraucht 6019 Hedpfx Aeytx Huealsfd 390 € 1 270 € 40 kg 1500 mm 600 mm 1000 kg 700 - 1.000 mm MINT CONDITION 3 table elements with 6 balls each

Condition: used, Year of construction: 2016, Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packaged Roller conveyor curve 90° Model: round belt Condition: used Year of manufacture: 2016 Manufacturer: AMI conveyor technology Total width outside: approx. 2100 mm Total width inside: approx. 1130 mm Conveyor width including motor: approx. 700 mm Conveyor width without motor: approx. 600 mm Roller spacing/axle spacing: approx. 80/130 mm Steel frame Frame height: approx. 125 mm Frame width: approx. 35 mm Color: light gray Includes SEW motor (0.37 KW) Includes side guide Feet to be ordered separately Stock: 3 pieces Price per piece The conveyor technology was running until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy to prepare an individual offer for you or advise you on the design or assembly questions. Simply tell us your requirements and the local conditions. Hfodpspl Uypsfx Aaled Take advantage of our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades or the electronics industry. Together we will work out ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automatic sorting technology or additional components such as order picking shelves or containers.