Used pre-setting tools for sale (45)

Condition: excellent (used), Year of construction: 2014, Panel PC control Maximum tool length: 500 mm Maximum tool diameter: 400 mm Tool holder: SK 50 Label printer Hedpfx Aezatiqecgofl Under-table

Condition: used, Year of construction: 1983, longitudinal travel 1 mm Hjdpfx Acou Sbc Aogefl cross travel 1 mm table length 1 mm weight of the machine ca. 0,5 t dimensions of the machine ca. 1,5x0,8x1,9 m

Condition: used, Technical details: Heating: 15 kW rated current: 28 A Heating capacity: 15 kW current: max.71 A cooling water consumption: 11 l/min frequency range: 10-25 kHz frequency range: 50/60 voltage: 400-480 +-10% V current- max.: 3020 A weight: 406 kg dimensions L x W x H: 1,25 x 0,8 x 1,6 m The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Hfodpfx Acoxfvldegsl Preheating for welding processes Soldering and shrinking applications Heat treatments (e.g., tempering or hardening of smaller components). Due to its frequency range of 10–25 kHz, the device is more suitable for medium to large workpieces, as the penetration depth at these frequencies is higher than with high-frequency systems. *

Condition: used, Technical details: max. temperature: 150° Grad voltage: 380 Volt V / Hz current- max.: 6,5 A weight: 65 kg dimensions L x W x H: 0,68 x 0,22 x 0,58 m Working Area / Application: water tempering system transportable - connection coolant water: inlet and outlet Ø 12mm internal with bayonet connection - connection circulating medium: inlet and outlet Ø 12mm with bayonet connection - control via control panel equipment: - 1400mm connection cable Hsdpfeu N Ag Rjx Acgefl Optional test run possible. *

Condition: used, Technical details: x-travel: 130 mm y-travel: - mm z-travel: 140 mm machine weight approx.: 107 kg dimensions L x W x H: 0,72 x 0,33 x 0,63 m Concentricity Gauge Device and Presetting Device (table device) - application: measuring device for production components (helical tooth gears), testing and adjusting of milling tools Hfsdpfju N Apfox Acgol Characteristics: - longitudinal axis approx. 100 mm, Ø 280 mm - tool slides: turning range 360 °, tool holder Ø 30 x 80 mm, size LxW: 200x175 mm, with measuring device measuring rod Ø 8 x 400 mm adjustable - vertical slide: pin gage Ø 20 x 80 mm *

Condition: used, Technical details: x-travel: 100 mm y-travel: 450 mm Hedpfx Acsu N Aprsgsfl z-travel: 400 mm tool taper: SK 40 - Ø 22mm machine weight approx.: 138 kg dimensions L x W x H: 0,72 x 0,38 x 0,99 m characteristics: - measuring area longitudinal axis z=400mm, diameter x= Ø 200mm, diameter y = fixed - tool holder for SK 40 / SK 45 / SK 50, rotation area 360°, max. tools Ø 220mm, receptive cylinder Ø 80mm - dial gauge holder combinable for longitudinal path X and transverse path Y accessories: - 3 pcs tool tapers SK40 + SK45 + SK50 - 2 used dial gauges The device is on sale as described, on sale as is! *

Condition: used, Year of construction: 1998, measuring range X-axis 330 mm measuring range Y-axis 400 mm weight of the machine ca. 0,250 t dimensions of the machine ca. 0,88 x 0,52 x 0,99 m Tool presetter - year of manufacture 1998 Workshop PC - year of manufacture 2008 Label printer - year of manufacture 1999 --> Measuring axes 2 precision guides on both axes in a recirculating ball bearing system with maximum load capacity, each with 2 recirculating ball bearings per guideway, preventthe measuring slides from yawing and pitching. Hodpew Ap Rqefx Acgsfl --> Optoelectronic measuring systems Heidenhain LS, centred in both measuring axes for position determination in the centre of the measuring slides. --> Tool holders Hardened SK 50 tool spindle with taper in gauge quality, mounted in precision roller bearings for maximum concentricity and reproducibility. --> Rotation of the tool spindle can be pneumatically clamped at the touch of a button, Positioning 4x 90° for stationary tools via pneumatic index bolts. --> Scanning of cutting edges High-quality profile projector with 150 mm matt disc diameter and 20- x magnification for non-contact measurement and reliable reading of the cutting position in the projector. --> Rotatable and fixed crosshairs for checking the radius and angle of the tool cutting edge. - functional - not in need of repair incl. measuring computer, label printer, screen and keyboard

Condition: used, tool diameter 300 mm length 300 mm weight 80 kg range L-W-H 800x400x750 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Hfsdsytx Rtjpfx Acgjl possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Length 800 mm measuring range X-axis 520 mm Table dimensions 700 mm weight 900 kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Hsdpfx Aceytx Rysgofl than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: AC, overall weight: 280 kg, input frequency: 60 Hz, compressed air connection: 8 bar, For sale is a fully functional, tested EZset tool presetter, type EZS420C2X, manufactured in 2017, complete with monitor and printer – tested and ready for immediate use. This system is of German manufacture (EZset GmbH & Co. KG, Pleidelsheim) and is designed for precise use in tool and machine construction. The unit has been regularly maintained, operated exclusively in a climate-controlled measuring room, and is in very good technical and visual condition. Technical data: Hfedpfxoy S Ti Ne Acgol - Manufacturer: EZset GmbH & Co. KG - Model: EZS420C2X-00074 - Year of manufacture: 2017 - Original purchase date: 23.11.2018 (invoice included) - Power: 600 VA - Voltage: 100–120 V / 200–240 V AC · 50/60 Hz - Pneumatics: 6–8 bar (80–110 PSI) - Weight: 280 kg - Tool holder: Adapter-SK 40 & Adapter-HSK 63 Measuring ranges: - Z = 420 mm - D = 420 mm - max. jaw diameter = 100 mm Operating monitor: MOSTRON PPC13-113286-F (12–24 V DC, 50 W) with touchscreen Operating system: Windows Embedded Standard (licensed) Backup software: Drive Snapshot 1.4 (licensed) Label printer: TSC Auto ID DT2205 (24 V, TÜV and CE certified) Equipment & Functions: - Precise measurement of tools in the X and Z directions - High-resolution camera and screen display - Pneumatic tool holder - Intuitive touch operation with EZset software - Label printer for tool identification - Fully integrated control and pneumatics - All original nameplates and CE certificates are available Condition: - Fully functional and ready for use - No error messages or defects - Clean, well-maintained overall condition - Directly from ongoing operation Scope of delivery: - EZset EZS420C2X unit - MOSTRON operating monitor - TSC label printer - Pneumatic connection - All connecting cables and accessories as shown in the pictures

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, x-travel:1600 mm y-travel:1000 mm z-travel:1300 mm size of plate:1.500 x 800 x 120 mm capacity Y-axis:175-1210 mm capacity Z-axis:0-810 mm digital readout:Grundig 3-achs-Digimeß digital readout:235 x 80 x 130 mm Hfodpfjcxxwrjx Acgjl total power requirement:0,04 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,0 x 1,5 x 1,63 m 3-D coordinate-measuring machine with caste precision plate fine-scraped, with 4 feet 2000 x 1500 mm, approximately 20 different marking and testing probes, equipped with STIEFELMAYER type "A" guidance system

Condition: used, Year of construction: 2011, Technical details: measuring range X-axis: Länge: 0 - 160 mm measuring range Y-axis: Höhe: 0 - 425 mm Tool table: Auflage: Ø 95 mm tool taper: SK 50 tool taper: drehbar 360° weight: 12 kg dimension L-W-H: 420 x 165 x 775 mm This is a bench top unit. Application: Alignment of rotary milling tools. Measuring method: manual alignment with/via digital display Measuring bar manually movable Measuring beam transverse (X) 160mm and vertical (Y) 425mm movable with measuring sensor Hsdpfx Aou N Artscgofl Measuring display: both axes digital, voltage 1.5 V (AA battery) *

Condition: used, Year of construction: 1990, Technical details: total power requirement: 125 VA / 50Hz machine weight approx.: 0,3 t dimension machine xH: 0,8 x 0,7 x 1,6 (mit Tisch) m This is a tabletop device according to the optical measuring method. - incl. under table Application: - setting of tools of NC lathes other features: - coordinate of the bridge adjustment=200mm - coordinate of the slide adjustment=350mm - enlargement of the projector 20x - accuracy of cutting adjustment on projector=0,005mm - smallest measuring length=0,002mm - lower edge of measuring holder up to table=150 - 170mm - reading the tool coordinates opt. -4 - table WxDxH: 545 x700 x 110mm Hfjdpfx Acsu N Ap Eogol - base frame with drawer: WxDxH: 586 x 700 x 730mm *

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, total width: 510 mm, total length: 1,300 mm, total height: 1,800 mm, For sale is a presetting device of the DMG brand and type UNO 20/40 The device is in good condition, fully functional and ready for immediate use Technical data: Year of manufacture: 2015 Travel Z: 400 mm Travel X: 50-200 mm Hfsdsuy Sf Rjpfx Acgol Measuring range: 400 mm Diameter: 400 mm Max. tool weight: 200 kg Overall dimensions: 1300*510*1800 mm Total weight: 240 kg Tool holder: SK50-SK 40 On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, For sale is a presetting device of the company Mapal and the type Uniset-V The device itself is in good condition and functional, however the digital display is defective and needs to be repaired Measurement of tools, undercuts and distances possible as well as clamping between centers is no problem Technical data: Manufacturer Mapal Type: Uniset-V Year of manufacture: 2002 Digital display Heidenhain Electric axis control 4 axes travel + turntable Additional shelf with sockets for printer etc. No data sheets or operating instructions available Hjdpfxjmkikfe Acgsfl Weight approx. 1.5 tons Dimensions: approx. 1.75m*0.75m*2.41m Loading & or shipping possible for an extra charge Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1997, diameter - cutter special 30 mm Hfjdev Uchbspfx Acgjl draw-in arbor diameter 40 mm clamping height 310 mm circle diameter 80-300 mm weight 30 kg

Condition: used, Year of construction: 2009, machine/vehicle number: V445C3-00236, Zoller Venturion 450 Precise measurement regardless of operator High degree of automation with CNC axes, autofocus, and rotary encoder Power-operated and universal tool clamping High-precision “ace” spindle clamps tools at the push of a button ZOLLER image processing “pilot 4.0” and large 24" monitor Industrial high-resolution camera Hfedsy D D T Ajpfx Acgol Next to the CNC machine, in the workshop, in manufacturing cells User-friendly

Condition: used, Year of construction: 2003, machine/vehicle number: V420D2-0038, Zoller Venturion 500, Tool presetting device. Versatile: Flexible turret table configuration to suit your requirements. Universal: A single measuring device for almost all different tool holders. Simple: Comfortable controls and user-friendly software. Time-saving: Turret table equipped with frequently used holders. Stable: Special alloy and robust construction. Economical: Consistent use of branded components and excellent price-performance ratio. Hfedey D D Utepfx Acgol

Condition: used, Year of construction: 2009, machine/vehicle number: H400C3-0066, Zoller presetting device Hyperion 400 Versatile Flexible turret table configuration as needed Universal One single measuring device for almost all different tool holders Simple Convenient operating elements and user-friendly software Time-saving Turret table equipped with commonly required holders Stable Special alloy and robust construction Economical Consistent use of brand-name products and best price-performance ratio Hodpfx Asy D D U Hjcgjfl

Condition: used, Year of construction: 2011, functionality: limited functionality, machine/vehicle number: 782, Technical characteristics: Measuring Capabilities Hjdpfx Asyanf Tscgefl - Measuring range (Z-axis): 600 mm (≈ 23.6") - Measuring range (X-axis): 200 mm (≈ 7.8") - Max. tool diameter: 400 mm (≈ 15.7") - Snap gauge diameter: Up to 100 mm (optional) Performance Features - Spindle type: High-precision SK50 spindle with integrated calibration surfaces - Spindle locking: Power-operated brake with 4 × 90° indexing - Image processing: ZOLLER »pilot« software (version 3.0) - Camera: CCD with telecentric lens and 20× magnification - Cutting edge detection: Automatic, including edges >90° - Focus system: Analog focus display with dynamic cross hairs Control & Interface - User interface: Touchscreen with graphical guidance - Manual control: Ergonomic »eQ« single-hand operating handle - Fine adjustment: Electronic control for X and Z axes - Data transfer: RFID tool identification, label printing, and CNC integration Construction & Environment - Frame: Lightweight metal with optimal thermal conductivity - Scales: Heidenhain glass scales for high measurement accuracy - Software options: Tool management, adapter calibration, concentricity/run-out programs - Mounting/Measurement interfaces: # HSK63 # HSK100 # ISO40 # ISO30/BBT30 # BMT55 Machine status: FUNCTIONAL in manual mode only. For optimal performance, overhaul by the machine supplier is recommended.