Used tube bending machines for sale (151)

Condition: good (used), functionality: fully functional, pipe diameter (max.): 28 mm, bending angle (max.): 180 °, bending force (max.): 7 t, overall weight: 250 kg, Bendingcapacity: 3/8" - 2" Bending angle: 180° Revolverbending: 6-fold Attached bendingtool: Ø 28 mm Guodpfx Aswzchyjfcea Country of origin: The Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1.000 x 800 x 950 mm

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: - 3 Mandrels Godpfxon Smq Ij Afcjua - Mandrel retraction unit - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Condition: excellent (used), Pipe bending machine Rothenberger system Bending capacity: 2 7 bending dies for pipes 3/8 - 1/2 - 3/4 - 1 - 1 1/4 - 1 1/2 - 1 3/4 - 2 Footprint: Width: 630 mm Length: 680 mm Transport case dimensions: Width: 700 mm Depth: 300 mm Height: 360 mm Weight: 80 kg Gedpeyv A H Eefx Afcjua

Condition: ready for operation (used), Year of construction: 1966, A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible. Guedpfxsy Ax U Ee Afcja

Condition: good (used), Year of construction: 2007, machine/vehicle number: 5007078, Offer 26085 Technical Data: - Bending capacity: Tubes at 45 kg/mm² up to Ø 60 x 4 mm - Solid material up to 45 mm - Bending angle: 0 - 180° - Maximum central bending radius, Rm: 171 mm - Minimum inside bending radius, Ri: 10 mm - Drive: 400 V / 4 kW - Space requirement: approx. W 400 x H 950 x D 600 mm Gujdpoyz R Tkefx Afcsa - Weight: approx. 100 kg - with pre-selection for bending angle - Digital bending angle display + fine adjustment - 8 bending tools included: - ½" R 46 mm - 25 R 56 mm - 30 R 67 mm - ¾" R 56 mm - 1" R 67 mm - 1 ¼" R 100 mm - 1½" R 130 mm - 2" R 150 mm

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Guodotr U Hlopfx Afcsa Weight: approx. 1200 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system Gedpfx Afsttagdecjua - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Year of construction: 1980, condition: used, machine/vehicle number: 80246, max. tube-Ø: 60,3 x 3,2 mm max. bending angle: 180 ° arbor rest length: 3000 mm electrical connection: 380 V, 8,6 kW space needed: 2400 x 5700 x 1500 mm Godo N Hfpspfx Afcjua weight: ca. 2500 kg

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine Guodpfxodzw Hwe Afcsa existing bending segments: 3/8, 3/4, 1 1/4 u. 2" space requirement: 850 x 640 x 780 mm

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Gujdedzzyfjpfx Afcea

Condition: used, Year of construction: 1997, tube diameter / mm wall strength / mm bending radius min. / mm ROBOMAC 206 CNC wire bending machine General information Machine model: ROBOMAC 206 Manufacturer: LATOUR / NUMALLIANCE (France) Machine type: CNC wire bending machine / wire forming machine Year of manufacture: 22 December 1997 Serial number / Registration: 9711026 CE marking: present Technical data Working range Wire diameter: approx. 2 – 6 mm Material feed Wire feed length: unlimited Guedpfx Afsyt R Siecoa Feed accuracy: ± 0.05 mm Revolving arm Positioning accuracy: ± 0.02° Rotation range left–right: infinite Arm length: 600 mm Bending heads Number: 2 Bending radii over mandrel: 1 to 15 mm Bending radii over roller with wire feed: 15 mm to infinite Positioning accuracy: ±0.02° Rotation range left–right: ±360° Programming time: 5 to 15 min. Time required for production changeover Without wire: 0 min With wire: approx. 30 min Power requirement: 6.3 kVA Dimensions Without safety barrier: 2.60 x 2.00 x 1.72 m With safety barrier: 4.50 x 2.00 x 1.72 m Net weight: approx. 2250 kg Typical applications - Wire-formed parts - Wire brackets - Metal hooks - Springs - Technical wire-formed parts for industrial applications Disclaimer All information is provided without guarantee. No liability is accepted for the accuracy, completeness and up-to-date nature of the technical data. Translated with (free version)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2,400 sheets/hour Guodpsyzyh Dsfx Afcea Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotational speed Z-axis: 900 °/s Rotational speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Max. range at max. acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control system: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg EQUIPMENT BLM bar loader BLM CARM 7 Note: The machine is sold without conveyor belt and safety fence.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 611080402022, Equipment: bar feeder, TECHNICAL DETAILS Axis Speeds Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminium/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulics System Tank capacity: 80 l Pump delivery rate: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75 %, 24 h Electrical Data Supply voltage: 400 V ±5 % Power type: Three-phase without neutral Godoyzya Tjpfx Afcsua Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM bar feeder BLM CARM 7 Bar feeder weight: 650 kg Conveyor belt Note: The machine is sold without safety guards.

Condition: used, Year of construction: 1981, 2" mm dimensions of the machine ca. 1,3 x 0,8 x 1,3 mm weight of the machine ca. 250 kg Equipment/Accessories: - Foot switch - Mobile stand Includes a wide range of bending tools See images Gsdpfx Afjy Aa Imjcoua

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Excellent condition Year 2006 Foot Pedal Weight 193kg Gjdpfx Afou H Ibnjceua Power supply - 415v/3 phase

Condition: new, bending speed 2.1 m/min Bending capacity - square 30x30 mm Guedpfx Afjyvvrnscoa bending capacity - flat iron 80x15 mm Bending capacity - flat iron on edge 50x10 mm tube diameter 1" oder 60x2 mm Shaft diameter - upper 35 mm Shaft diameter - lower 30 mm total power requirement 0,75 kw range L-W-H 650 x 500 x 1300 mm weight 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm Shaft diameter 50 mm bending speed 4,3 m/min total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German Gujdpfsyvvnijx Afcsa

Condition: used, functionality: unexamined, Tube drawing machine with 2 stations. The machine has not been used for a while and is kept in storage. Gjdpfxsyxpr Hj Afcsua

Condition: used, Year of construction: 1993, R 36 - R 150 bending speed 4,5 U/min Gusdoyx Ip Dspfx Afcea 3 6 - 33,7 mm dimensions of the machine ca. 600 x 260 x 900 mm weight of the machine ca. 110 kg Equipment/Accessories: - Foot switch - Base frame Includes the following tools: 1 pc. 25mm, R80 1 pc. 18mm, R45

Condition: used, Year of construction: 2007, pipe diameter (max.): 35 mm, overall weight: 2,700 kg, total length: 2,400 mm, total width: 1,400 mm, total height: 2,000 mm, input voltage: 380 V, Tube forming machine Gjdox Tt H Rspfx Afceua Brand: BLM Model: TUBE-FORM Year: 2007 Serial number: 415050200004 Weight: 2700kg Power: 12KVA Three-phase 380V Dimensions: 2400x1400x2000(h)mm Maximum tube diameter: 35mm Pushing force: 3.5t Clamping force: 5t Max. working stroke: 130mm

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW Gjdpfx Asxab Hvsfcsua weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: new, Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D Gsdpfoxabu Hex Afcjua - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration Gusdeyx A Uujpfx Afcja -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: used, Year of construction: 2006, RASI S80.6L - Mandrel Bending Machine - Mandrel and rotary draw bending of tubes and round profiles - Spiral bending of tubes - Includes tooling and documentation - Year of manufacture: 2006 Technical Data - Tube Ø x wall thickness: 82 x 2.6 mm - Max. section modulus: 12.7 cm³ - Min. tube Ø: 4 mm - Outer bending radius: 228 mm - Inner bending radius: 34 mm - Min. bending radius: 1.5 x D - Max. bending angle (accuracy ± 0.1°): 195° - Return bending speed (programmable): 0 – 9.3 rpm - Forward bending speed (programmable): 0 – 6.6 rpm - Pressure die: fixed / following - Tool configuration: single-, double- or triple-grooved - Bending direction: right - Feed speed (stepless): 0 – 60 m/min - Feed force adjustment during bending: stepless - Rotation speed (stepless): 0 – 60 rpm - Max. rotation angle (± 0.1°): unlimited - Max. tube clamping force: 8 t - Collet clamping range (diameter): 6.5 mm - Bending length: 3 – 6 m - Motor power: 11 kW - Operating voltage: 400 V / 50 Hz - Control voltage: 24 V DC - Machine length: < 7000 mm - Weight: approx. 2500 kg Gsdpfx Afsyvvk Decoua

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. Guodpfx Aoyvhl Hofcja We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00