Used milling machines (window production) for sale (171)

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Cjdpew A Rv Isfx Aqveri Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: used, Aluminium window production machines for sale. 2 x DGS Emmegi NORMA 400, notching saw GRAULE AS450, 2 x corner press ELUMATEC, copy router ELUMATEC, notching mill RINALDI, punch ANC001FL, glazing bead saw EMMEGI 300s. Crodpoxvaw Sjfx Aqvei

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Elumatec KF 78 / 60 used & fully functional For processing aluminum or steel profiles Credpoy Sxr Nefx Aqvei With vertical and horizontal milling motor, spray device and pneumatic clamping device Technical data (according to Elumatec): Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Dimensions (H x W x D): 160 x 280 x 110 cm Weight approx. 260 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, Phantomatic T3A incl. swivel device for angled head Machine features: - CamPlus - Barcode reader - Touchscreen - Overlength function up to 8000 mm - 6-sided machining Credpfx Asz Adx Hoqvji - Swivel device for angled head - Angled head Travel range X-axis (longitudinal axis): 4300 mm Travel range Y-axis (transverse axis): 270 mm Travel range Z-axis (vertical axis): 300 mm Electric spindle 1 HSD – max. 18,000 rpm – power 5.5 kW Tool magazine capacity: 9 Angular gearbox for side machining, rotatable Number of clamping devices: 4 incl. automatic positioning of the clamping devices Weight: 1,950 kg

Year of construction: 1992, operating hours: 100 h, condition: used, functionality: fully functional, Description Corner crimper for pressing profiles with a height of up to 68 mm. Crjdpfxex Rvl Re Aqvei Extremely high pressing force achieved by a large-volume bellows cylinder (maintenance-free). The machine is easy to adjust and operate. Counter bearing pneumatically positionable with mechanical locking Support arms and pressing blades included as standard Two-hand operation for safe use Options Additional support Special pressing blade Technical Data Pressing height: 68 mm Pressing force: 40 kN (4 t) Drive: Pneumatic Compressed air supply: 7 bar Air consumption per cycle: 30 l Dimensions (L × D × H): 650 × 820 × 1,270 mm Weight: 205 kg

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! Crsdpfezy E D Ssx Aqvei You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2003, condition: used, 4 controlled axes for profile machining Travel path X-axis: 7,200 mm Rotation A-axis: 0°-180° Speed range: 0-18,000 RPM. Tool changer with 8 positions on the machine plus additional tool changer in the bed Automatic belt tensioner displacement Profile editing Generation X, with Schüco CAM software and controllable about SchüCal+ - calculation program Operating hours: Machine on: 15605 h / NC on: 3691 h. Accessories / Equipment: Crodpfxsyz T Iqo Aqvei Standard tool set (used) 5.5 kW spindle (New spindle inverter) (New PC / Control) The machine is overhauled, calibrated and immediately available for delivery. Weight: approx. 5,000 kg

Year of construction: 2005, condition: used, CNC Machining Center Elumatec SBZ 122, year of manufacture 2005, designed for machining aluminum profiles for windows, curtain walls, and light metalwork. This is a robust and reliable industrial machine, highly regarded for its machining precision and operational continuity. Main features: - 3-axis CNC machining center - High-rigidity steel frame - Vertical spindle for milling, drilling, and complex operations - Worktable with pneumatic vices for stable and precise clamping - Long-travel longitudinal axis, ideal for processing profiles of considerable length Csdpjyg Ht Aefx Aqveri - Protective enclosure with chip conveyor - Elumatec CNC control unit - Ideal for medium to high production and repetitive operations Applications: - Milling - Drilling - Slotting - End and face machining - Production of aluminum frames and special profiles Key data: - Manufacturer: Elumatec - Model: SBZ 122 - Year of manufacture: 2005 - Condition: Used Condition: - Machine in good overall condition - Coming from an industrial environment - Can be seen in operation by appointment Included equipment: - Complete workbench - Pneumatic clamping system - Control panel - Original covers and safety guards

Year of construction: 2014, condition: good (used), The Elumatec SBZ 130 is a 3-axis profile machining center designed for efficient processing of aluminum, steel, and stainless steel profiles. All operations, such as milling, drilling, and threading, are performed on a stationary profile, which protects its surface. Cedpfx Ajyt H Uyjqvjri - Axes: 3-axis control, with a tool spindle as an additional axis. - Machining length (X-axis): 7200 mm - Travel (Y-axis): standard 485 mm (Vmax. 60 m/min) - Travel (Z-axis): standard 340 mm (Vmax. 60 m/min) - Spindle speed: standard 6000 rpm, optional high-speed spindle (18,000 rpm) - Spindle power: 5.5 kW - Tool magazine: integrated revolving tool head for 8 tools or 4 angled heads, ensuring short tool change times - Control: Windows operating system with eluCam software; 18.5" PC panel, with USB ports and network connection - Clamping system: automatic positioning of pneumatic clamps - Compressed air supply: 7 bar MACHINE: Prepared tooling dedicated to PVC and steel processing: - Tool holders, - Reducer for steel processing, - Special tools with chip breakers, - Dedicated programs for processing door profiles. The head was replaced in 2025.

Year of construction: 2018, condition: excellent (used), The following systems can be processed: Profile Kömmerling, 76AD, 76MD, 76Unity, 88MD # High-temperature welding # Quick-change system for welding strips Quick-change system for shims Diagonal or parallel joining process Resilient intermediate plates for tolerance compensation Heated boundary plates Welding bead limitation on support and clamping plates 2 mm (optionally 0.2 mm possible) Heated welding bead limitation Individually programmable welding parameters Safety device according to CE Horizontal discharge device Control technology High-performance JetControl control ensures high user-friendliness Intuitively operable information management system with diagnosis and reporting tool Digital visualization of maintenance intervals Display of the profile strips to be inserted, indication for profile and shim changes Individually programmable welding parameters Operating system Windows High-quality PC with 19" TFT monitor USB ports DVD drive # Keyboard and mouse # Data management via database Technical data: Overall depth min.: 45 mm Overall depth max.: 120 mm Profile width min.: 25 mm Profile width max.: 130 mm Working area: 3,000 x 2,300 mm Csdoz Ep Ezjpfx Aqvjri Element size min.: 320 x 320 mm Element size max.: 2,600 mm in the direction of travel Element size max.: 3,000 mm width Element weight max.: 80 kg Electrical connection: 230 / 400 volts, 3 phases, 50 Hz Compressed air connection: 7 bar # Air consumption: 50 l/min

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1500050182, Elumatec SBZ 150 5-axis profile machining center for aluminum profiles up to 7.3m and thin-walled steel profiles. Due to a production changeover to a tube laser system, we are selling our fully functional Elumatec SBZ 150. Service was performed by Elumatec in March 2026, and we have not used the machine since then. Interested parties are welcome to visit us at any time. We would be happy to demonstrate and allow you to test the machine. Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - A-axis swivel angle: 0-90°, freely programmable - C-axis swivel angle: 0-355°, freely programmable - Max. machining length without end-face machining: 7300mm - Max. machining length with end-face machining: 6980mm - Tool changer with 10 positions, as well as a saw blade holder - 8 material clamps - Tool holder HSK63 Crjdpfx Ajy Dvq Hoqvei - Spindle power 15kW / 22000 RPM - 2-layer machining - Minimum quantity lubrication - Central lubrication - Saw blade 400mm Machine is available immediately! Space requirements can be found in the layout in the appendix. The transport instructions can also be found in the appendix; if you have any questions, please do not hesitate to contact us. Due to the planned re-installation, dismantling, loading, and transport should preferably be organized by the buyer. Various auxiliary tools can be provided upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy, or similar. Subject to prior sale.

Condition: like new (used), Year of construction: 2020, - 2 pneumatic clamps - Mist lubrication system - depth adjustment Crjdpsr Iiimsfx Aqvei - 400V

Year of construction: 2012, condition: excellent (used), functionality: fully functional, - Power (kW): KFB 353 = 1.5 - Voltage (V): 400 - Air pressure (bar): 7 - Air consumption (l/min): min. 250 - Revolution shaft (min-1): KFB 353 = 12,000 - Maximum cross section of the workpiece WxH(mm):190x111 - Milling range L x W (mm): 300 x 130 - Milling depth (mm): 200 - Machine dimensions L x D x H (mm): 3,500 x 820 x 1,650 Dpro2J - Weight (kg): approx. 420 - Workable material: KFB 353 = PVC and aluminum profiles Crodpfx Aswzivdsqvei

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Cedewgm Ibjpfx Aqveri Weight: 2500kg

Year of construction: 2010, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 7200 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control Windows XP with Elusoft Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle Codpfx Aezx D Rujqveri Right-angle gearbox with saw blade diameter up to 254 mm (only 90° cuts possible) Tensioner detection and automatic displacement 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: reconditioned (used), 4 axes X-AXIS (longitudinal) (mm) 7,700 Y-AXIS (transverse) (mm) 470 Crjdpfez R T U Hsx Aqvoi Z-AXIS (vertical) (mm) 420 A-AXIS (spindle rotation) 0°–180° ON-BOARD AUTOMATIC TOOL MAGAZINE Number of tools in magazine: 8 Automatic positioning of clamping jaws

Year of construction: 2021, condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute preselectable, allowing both steel and aluminum profiles to be processed 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Csdpozx U Iwsfx Aqveri Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Machine in like-new condition

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Bar loading warehouse Maximum bar length that can be loaded: 7500 mm Bar positioning unit Trolley travel speed: 0-60 m/min Milling unit: 4 electric spindles, 4.5 kW each Tool shank: ISO 25 X-axis travel: 240 mm Y-axis travel: 350 mm Z-axis travel: 350 mm Cutting unit with pneumatic positioning Blade diameter: 550 mm Crsdpfjy Tqabjx Aqvoi Cutting angles: 45° – 90° – 135° Automatic discharge

Year of construction: 2005, condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute preselectable, allowing both steel and aluminum profiles to be processed 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: about 350 kg Credsz Hx Iuopfx Aqvsi

Condition: used, functionality: fully functional, P Macchine 03P – Industrial Machine (Year 2002) Manufacturer: P Macchine s.r.l. Model: 03P Year of manufacture: 2002 Serial number: 03P0100071 Location: Finland Country of origin: Italy CE marked: Yes Description P Macchine 03P is a robust Italian-made industrial machine designed for professional use. The machine is CE certified and suitable for continuous production. Its solid construction and straightforward technology ensure reliable operation and easy maintenance. Credpfx Aox Rvmujqvei Technical specifications Voltage: 220–240 V Phase: 1~ (single-phase) Frequency: 50–60 Hz Power: 0.75 kW × 3 Current: 7 A Spindle speed: 12,000 rpm Operating air pressure: 6–7 bar Air consumption: 2 Nl/s Weight: 290 kg Additional information Test run possible by appointment Buyer is responsible for loading, transport, customs and all related costs All details to be verified with the seller prior to purchase 📩 Contact us for price, additional photos and further information

Year of construction: 2008, condition: excellent (used), functionality: fully functional, - Bar loading warehouse Maximum length of bars that can be loaded: 7500 mm - Bar positioning unit Carriage traverse speed: 0-60 m/min. - Milling unit with 4 electric spindles, 4.5 kW each Tool holder cone: ISO 25 X-axis travel: 240 mm Y-axis travel: 350 mm Z-axis travel: 350 mm - Cutting unit with pneumatic positioning Blade diameter: 550 mm Cutting angles: 45° - 90° - 135° Crsdpfxsy S E H He Aqvji - Automatic unloading

Year of construction: 2008, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Speed continuously adjustable up to 24,000 rpm Handheld control unit Minimal量 sprühung tensioner detection and tensioner displacement Csdpfszx Dz Tex Aqvsri Profile length measurement at the head Barcode scanner 5 pneumatic material clamps light barrier Additional material stop on the left for long profiles Spindle in like-new condition, spindle feeding force: 16 kN Weight: approx. 2,000 kg

Year of construction: 2006, condition: used, Rotox bar processing automaton type SBA 485 Crodpfjyliq Uex Aqvei

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. Travel distance X-axis: 6,700 mm Credpfx Aewwukxeqvei Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows 10 control with new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light curtain areas, enabling pendulum operation A total of 8 material clamps Spindle in very good condition, spindle-in-draw force: 12.5 kN Protective fence removed, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, -Maximum milling cutter diameter: 280 mm -Milling cutter arbor bore: 40 mm -Feed: manual -Power: 2.5 kW at 400 V/50 Hz Crsdpfjyyma Rox Aqvoi -Milling spindle speed: 2,800 rpm -Compressed air connection: 7 bar -Air consumption: 10 liters per working cycle, with minimum quantity lubrication: 20 liters -Length: 1,540 mm, depth: 905 mm, height: 1,200 mm, weight: 248 kg