Condition: good (used), Year of construction: 2008, operating hours: 25,662 h, Functionality: fully functional, machine/vehicle number: 17951, TECHNICAL DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) for 3-axis simultaneous machining X-axis travel: 660 mm Y-axis travel: 660 mm Z-axis travel: 660 mm Speed range: 40 - 12,000 rpm B-axis: 360° Indexing increment: 0.001° Distance table surface - spindle nose: 80 to 680 mm Distance pallet surface - spindle center: 80 - 680 mm Distance pallet table center - spindle head: 120 - 720 mm Pallet size: 500 x 500 mm max. table load: 400 kg Max. workpiece size: Ø 650 mm x 750 mm Table surface: 40 holes â M16 x 2 mm pitch Pallet change time: 7.5 s Pallet change time (pallet to pallet): 15 s Number of pallets: 2 Number of magazine positions: 120 Tool diameter: with full occupancy Ø90 mm Tool diameter: with free neighboring stations Ø150 mm Tool length: 350 mm Tool change time (tool weight < 5 kg): 1.3 s Tool change time (tool weight > 5 kg): 2 s Chip-to-chip time (tool weight < 5 kg): 2.9 s Spindle holder with face contact: BT 40 JIS B 6339 Big+ Pull stud: BT 40 JIS B 6339 40P Inner diameter of the spindle bearing: 80 mm Spindle motor power (30%/100% ED): 22 / 15 kW Max. Torque (FANUC motor): 187 Nm up to 1,120 rpm Rapid traverse X-, Y- and Z-axis: 50 m/min Feed X-, Y- and Z-axis: 1 - 50,000 mm/min Stepless manual feed: 0 - 4,000 mm/min Positioning accuracy over the entire X-, Y- and Z-axis travel: ± 0.006 mm Fgslq Rzjtwcvzei Nob Repeat accuracy X-, Y- and Z-axis: ± 0.001 mm Changeover accuracy of different pallets in Y-axis: 0.01 mm Repeat accuracy of pallet clamping in X, Y and Z direction: 0.003 mm Indexing accuracy: 5" Repeatability of indexing: ± 2" Torque on table with FANUC drive: 380 Nm MACHINE DETAILS Dimensions: 3,340 x 6,740 x 2,533 mm Machine weight: 7,500 kg Total connected load: 51 kVA Supply voltage: 3 x 400V, 50 Hz Compressed air connection: 5.5 - 9.5 bar Compressed air consumption: max. 400 l/min Axle guides: Roller guides Lubrication: permanent grease lubrication X-, Y- and Z-axis power: 5.5/5.5/4.5 kW Axial force X-, Y- and Z-axis: FANUC motor 9.1/5.0/6.0 kN Acceleration/deceleration: 0.7 G EQUIPMENT - Preparation for magazine with 240 slots - Optical measuring system - Renishaw NC4 - RENISHAW OMP 60 measuring probe (EASY PROBE SOFTWARE included) - Measuring probe - Chip conveyor - Knoll high-pressure system - Extraction unit

Condition: used, Year of construction: 1995, x-travel 600 mm Folqst Hw R Rj Rzi Nsgb y-travel 560 mm z-travel 560 mm Control SIEMENS 840 C total power requirement 12 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m

Year of construction: 1998, Condition: good (used), Functionality: fully functional, TECHNICAL DETAILS x-way: 630 mm y-way: 630 mm z-way: 500 mm number of spindle revolutions: 0 - 15000 rpm pallet size: 500 x 500 mm b-axis: 360.000 x 0,001 ° tool holder: HSK 63 tool magazine: 41 Fslq Rzji T Ea Roi Njgb MACHINE DETAILS machine weight: approx. 15 t spindle drive: 32 kW

Condition: used, Year of construction: 2001, operating hours: 46,000 h, Functionality: fully functional, machine/vehicle number: 28910000632, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 85 kVA, torque: 35 Nm, table width: 400 mm, table length: 500 mm, rotational speed (max.): 20,000 rpm, overall weight: 17,350 kg, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, We handle the loading. Fgelq Rziswhd T Ro Nsb

Year of construction: 1996, operating hours: 91,897 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 288, TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm Control: Siemens MACHINE DETAILS supply voltage: 400 V / 3 phases / 50 Hz Connected load: 60 kVA total power requirement: 12 kW Machine weight: approx. 10 t Fgjlqelruxfo Rzi Nob EQUIPMENT - 2 machine pallets - 1 probe

Year of construction: 2003, operating hours: 33,792 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 28840003282, TECHNICAL DETAILS x-way: 800 mm y-way: 710 mm z-way: 710 mm B-axis: 360 Control: Siemens Sinumerik 840D number of pallets: 2 pallet size: 500 x 630 mm tool diameter: max. 120 mm tool holder: SK 50 Magazine: chain magazine with 62/90 places MACHINE DETAILS Machine weight: approx. 12.5 t (transport weight) height: 3,2 m space requirement: 6,0 x 6,5 m Felq Rzijlruqus Nsgb Rated power: 80 kVA Rated current: 120 A Operating voltage: 400 V / 50 Hz Compressed air: 6 bar

Year of construction: 2000, operating hours: 47,085 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 42272, Machining center with 5 pallets TECHNICAL DETAILS Fgololrupaoq Rzi Neb x-way: 600 mm y-way: 560 mm z-way: 560 mm B-axis (table): 360° tool holder: SK 40 pallet size: 5 x 500x400 mm Control: Siemens 840D MACHINE DETAILS supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) Fgolq Rjt Hwrhjzi Neb 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Year of construction: 2007, operating hours: 16,500 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: NH631GF0405, LPP System (Linear Pallet Pool) automation system with 12 pallets only 16,500 spindle hours TECHNICAL DETAILS travel X / Y / Z: 1050 x 900 x 980 mm B-axis: 360 Control: MSX-701 Maps 3 speed: 8000 rpm tool holder: BT 50 number of tool places: 140 number of pallets: 12 table clamping surface: 630 x 630 mm table load: 1500 kg MACHINE DETAILS dimensions: 3,37 x 5,97 x 3,41 m weight: 19 t total power requirement: 64,7 kVA spindle hours: 16.500 Switch-on time: 127.000 Folqsmfrtwo Rzi Nogb

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Make: STARRAG HECKERT, type: HEC 400D, year 2008, Control system, Siemens, type Sinumerik 840D, travel X/Y/Z Folq Rzisuav Igo Nsgb 650 x 650 x 650 mm, 2-fold pallet changer, pallet size 400 x 400mm, NC rotary table 360 x 0.001°, 80-fold tool changer, HSK 63 tool holder, max. speed 15,000 rpm, IKZ 50 bar, coolant temperature control, belt filter, chip conveyor, spindle cooling, preparation for infrared measuring probe, operating hours 56,194; spindle hours 9,196

Condition: excellent (used), Year of construction: 2006, operating hours: 23,200 h, Functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, This machine center works dry Disconnected from electricity one month ago Machine worked until 01/2025 No IKZ no inner cooling through spindle The machine only worked 1 shift over it’s lifetime and is in amazing condition Accuracy report of workpieces available on request Almost new-like condition, dismantling done by highly skilled specialists Felq Rsv H D Umszi Njgb NC Backup, System Backup, digital instruction everything already prepared and already set with the machine X/Y/Z mm 630 / 630 / 630 Spindle HSK63 speed 16.000 rpm B axis 360.000° Tool magazine with 160 tool places 12 pallet pool Internal cooling and high pressure unit Mechanical tool breakage control Brankamp available Filtration system Extraction system Chip coneyor Installation elements/Fixators BW User guide / Documentation Machine parameters on storage medium

Year of construction: 1998, Condition: excellent (used), Functionality: fully functional, TECHNICAL DETAILS x-way: 720 mm y-way: 630 mm z-way: 630 mm control: OKUMA OSP 7000 pallet size: 500 x 500 mm spindle speed: 10 - 5000 rpm tool holder: 10-fold pallet station tool holder: MAS BT 50 tool places: 200 pieces EQUIPMENT Fgjlq Rok R Tp Uszi Neb - tool breakage probe - Renishaw probe - High pressure coolant system - Coolant mist extraction system - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery is not shown in the pictures but in the description text.

Condition: good (used), Year of construction: 2006, Machine in perfect working order, in production, it can be visited, the head was recently rectified in TREVISAN Italy. Felq Rzomk S Swoi Nsgb

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 181612, Machine with high torsional rigidity for heavy-duty machining of steel and cast parts TECHNICAL DETAILS Control system: MAZATROL 640M NEXUS Travel X / Y / Z: 800 / 800 / 800 mm Rapid traverse: 60 m/min C-axis rotary table: 3,600,000 positions Spindle speed: 10,000 rpm Distance spindle nose to table: 150 - 950 mm Table size: 500 x 500 mm Load capacity: 1 t Tool length: 500 mm Number of tool positions: 60 Tool holder: SK-50 Tool weight: 30 kg Tool diameter: 125 / 250 mm Tool change time: 3.5 s MACHINE DETAILS Felqoufigaj Rzi Nogb Space requirement: approx. 7 x 3 x 3.5 m Weight: 14.6 t Nominal connected load: 76.68 kVA High-pressure cooling IKZ: 70 bar Chip conveyor: Mayfran Consep 2000

Condition: good (used), Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, total height: 2,380 mm, total length: 1,450 mm, total width: 17,600 mm, table width: 480 mm, table length: 800 mm, overall weight: 3,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, A DMU brand and type 50 V milling center is for sale A new spindle was recently installed. The machine is in very good condition and fully operational, machining in the 100el range is possible without any problems Technical data: Brand GRUNDIG Model MillPlus Spindle speed range: 20 - 8000 Number of axes: 3 X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 380 mm Outer length of table: 800 mm Outer width of table: 480 mm Spindle holder: SK40 Dimensions L*W*H: 2450*1760+2380 mm Weight: 3500 kg On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Fgjlq Rerdf Ebezi Neb Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2015, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, type: HEC 400D, year 2015, Control system, Siemens, type Sinumerik 840D, travel X/Y/Z = Fgjlq Rziouav H Ne Nsb 650 x 650 x 650 mm, 2-fold pallet changer, pallet size 400 x 400 mm, NC rotary table 360x 0.001°, 80-fold tool changer, HSK 63 tool holder, spindle speed 15,000 rpm, IKZ 50 bar, belt filter, coolant temperature control, spindle cooling, chip conveyor, sound and control cabinets, operating hours 43,698, spindle hours 5,401

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making but also for milling other materials - universal powerhouse with a rapid traverse speed of 80 m/min Materials: Plastics, composite materials such as CFRP / GFRP, model making materials, aluminum Industries: Automotive, aviation, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Folq Rzievcax Tj Njgb Reference number: 1204 Availability: April 2025 Model: 5-axis CNC milling machine G-S-F/Uni Spindle data: 13 kW / 10.3 Nm; 12000-24000 1/min; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions: 3500 x 1500 x 700 Control: Siemens Sinumerik 840 D SL with manual terminal HT 2 Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: pneumatic sliding door Year of construction: 2025 Condition: new

Condition: good (used), Year of construction: 1981, Functionality: fully functional, machine/vehicle number: 26237, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,600 mm, rapid traverse X-axis: 3,150 m/min, rapid traverse Y-axis: 3,150 m/min, rapid traverse Z-axis: 3,150 m/min, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,600 mm, feed rate X-axis: 3,150 m/min, feed rate Y-axis: 3,150 m/min, feed rate Z-axis: 3,150 m/min, nominal power (apparent): 33 kVA, controller manufacturer: Heidenhain, controller model: TNC131, workpiece weight (max.): 3,000 kg, table width: 1,000 mm, table length: 1,120 mm, table load: 3,000 kg, rotational speed (min.): 1,600 rpm, rotational speed (max.): 1,600 rpm, overall weight: 8,680 kg, spindle speed (min.): 8 rpm, spindle speed (max.): 1,600 rpm, spindle motor power: 1,100 W, spindle nose: ISO50, number of spindles: 1, type of input current: three-phase, drilling depth: 710 mm, Equipment: documentation/manual, The machine is in good technical condition, used in controlled conditions, ready for immediate use. Felq Rev Hqiqozi Negb

Condition: good (used), Year of construction: 2005, Machine in production and in perfect working order, it can be verified in our facilities. Folq Rziemqi Dps Negb

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Horizontal machining center Mazak PFH 5800 Year of manufacture 2006 Control Mazatrol PC Fusion CNC 640 M X 730 Y 730 Z 740 Spindle diameter 215 mm Internal coolant supply 70 bar Renishaw measuring probe Chip conveyor Tool magazine 160 places Palletech high-bay system 16 pallets + 2 loading stations Felq Rzisvt Aybe Njgb

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, CNC Fanuc 18i - MB TRAVELS: X axis: mm 850 Y axis: mm 700 Z axis: mm 750 Distance from spindle center to pallet top: mm 50 - 750 Distance from spindle nose to table center: mm 150 - 900 TABLE: Pallet size: mm 500 x 500 Pallet loading capacity: kg 500 Pallet surface: 24 – M16 x P 2.0 Pallet index degree: deg 1 SPINDLE: Max spindle speed: Rpm 14.000 Spindle taper: ISO 40 Max spindle torque (25% ED): Nm 220,5 FEEDRATE: Rapid traverse rate (X, Y, Z): m/min 60 Cutting feedrate: mm/min 30.000 AUTOMATIC TOOL CHANGER: Type of tool shank: MAS403 BT40 Tool storage capacity: 120 Max tool length: mm 400 Max tool weight: kg 10 Method of tool selection: Fixed address Tool change time (tool-to-tool): sec 1 Tool change time (chip-to-chip): sec 3,5 AUTOMATIC PALLET CHANGER: Number of pallet: 7 Type: Rotary shuttle Fgolq Rsvw Uyuezi Nob Pallet change time: sec 7,5 Pallet rotation in loading station: deg 90 MOTOR: Spindle motor (30 min): kW 18,5 / 22 Feed motor (X, Y, Z, B): kW 7,0/7,0/7,0/2,7 MACHINE SIZE: Machine height: mm 3.000 Machine dimension: mm 5.600 x 2.700 Machine weight: kg 15.000 Machine equipped with: • High pressure through the spindle 35 bar • Chip conveyor • Instruction manuals and CE declaration

Condition: good (used), Year of construction: 2014, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, Make: STARRAG HECKERT, type: HEC 400D, year 2014, Control system, Siemens, type Sinumerik 840D, travels X/Y/Z = 650 x 650 x 650 mm, 2-fold pallet changer, pallet size 400 x 400 mm, NC rotary table 360x 0.001°, 60-fold tool changer, HSK 63 tool holder, spindle speed 20,000 rpm, IKZ 50 bar, belt filter, coolant temperature control, spindle cooling, chip conveyor, Switch and control cabinets - Operating hours 26,558 Folq Rsuav Hpszi Nogb

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Controller FANUC Series 18i-MB Table size 1300 x 650 mm Table load 1500 kgs X travel 1100 mm Fjlq Rzouu Rzroi Nsgb Y travel 650 mm Z travel 600 mm Spindle speed 12000 rpm Tool holder type MAS BT40 ATC magazin 30-fold Weight 7200 kgs Dimensions LxWxH = 3100 x 2300 x 3100 mm Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 07577, travel distance X-axis: 510 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 460 mm, controller manufacturer: Fanuc, controller model: Series 16i-MB, workpiece length (max.): 510 mm, workpiece width (max.): 355 mm, workpiece height (max.): 460 mm, TECHNICAL DETAILS Machine type: 4-axis machining center Manufacturer: KITAMURA Type: MyCenter-2XiF Control: FANUC Series 16i-MB Serial number: 07577 Year of manufacture: 2004 Axes and table Total number of axes: 4 Table length: 900 mm Table width: 355 mm Number of T-slots: 3 Distance between T-slots: 110 mm T-slot width: 14 mm Max. Workpiece weight on the table: 240 kg Longitudinal travel (X-axis): 510 mm Transverse travel (Y-axis): 355 mm Vertical travel (Z-axis): 460 mm Workpiece size max. Length: 510 mm Width: 355 mm Height: 460 mm Tool changer Number of tools: 24 Maximum tool diameter: 80 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool holder: BT 40 Distance between spindle nose and table: 160 - 620 mm Fjlq Rzju Dngrsi Njgb Spindle Speed infinitely variable from: 0 rpm to: 10,000 rpm Feed rates Feed speed: 0 - 36,000 mm/min Rapid traverse lengthwise: 50 m/min Rapid traverse: 50 m/min Vertical rapid traverse: 36 m/min Power data Total power requirement: 25 kVA Dimensions and weight Machine weight approx.: 4,400 kg Dimensions (L x W x H): 2,565 mm x 2,470 mm x 3,000 mm EQUIPMENT Vice: 2 pieces Vice jaw width: 145 mm Coolant device Dividing head 4th axis: NIKKEN CNC202 Machine can be inspected assembled and can be energized for inspection after consultation.

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 189603, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, workpiece weight (max.): 30 kg, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 160, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS Folsufx T Neq Rzi Nsgb Travel X: 1,050 mm Travel Y: 800 mm Z travel: 880 mm Control system: MAZATROL 640M B-axis: 360 (0.001 index) ° Workpiece weight: max. 30 kg Tool magazine: 160 places Clamping surface: 630 x 630 mm MACHINE DETAILS Machine length: 6,400 mm Machine width: 2,600 mm Machine height: 3,200 mm Machine weight: 22.7 tons EQUIPMENT - Automatic pallet system (high rack) - Bigplus spindle - MP 10 measuring probe