Used hydraulic presses double column / four column presses for sale (201)

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Hfedpfx Ahsv Srfwenji Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: used, functionality: unexamined, Press with hydraulic unit for sale Hjdpfew Izrisx Ahnofi

Condition: used, Year of construction: 1993, Force: 100 tons Max. distance between columns: 1400mm Stroke: 250 mm Windows: 400mm Daylight: 400mm Table: 1250x1100mm Ram: 1250x1100mm Speed fast down: 400mm/sec. fast uo: 330mm/sec. work: 24-43 mm/sec. Power: 33kW Weight: 10.000 kilos Height: 3300mm Hsdpfec Uwx Dox Ahnsfi Width: 1700mm Depth: 1800mm 2-Hand operation Cutting dampers

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Hfjdpfx Aotiwgiehnsi Separate control cabinet Ritta Side passages Ground level installation

Year of construction: 1988, condition: good (used), Force: 160 tons Windows: 600mm Hfoded Rlm Repfx Ahnji Daylight: 750mm Table: 1400x900mm Ram 1400x900mm Speed down 400mm/sec. up 300mm/sec. work 19-50mm/sec. Stroke: 400mm Requested power: 45 KW Weight 23 tons Height: 4300mm Machine is floorstanding Siemens S5 control 3 cushions in bed

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) Hfsdod E U Nnepfx Ahnsi • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 160 t, stroke length: 300 mm, table width: 1,250 mm, table length: 800 mm, installation height: 500 mm, EXNER EX SL 160 double column press NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm Hedpfx Asuw S A Dehnsfi mech. depth stop

Condition: used, Year of construction: 1992, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, installation height: 700 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Hfedpfjup Si Hjx Ahnei Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. Hodpfx Aheup Skwenofi possible. Quill diameter: 30 mm

Condition: excellent (used), functionality: fully functional, pressing force: 120 t, stroke length: 300 mm, operating speed: 59 mm/s, reverse speed: 180 mm/s, table width: 600 mm, table length: 1,000 mm, distance table to ram: 800 mm, clearance between the columns: 850 mm, overall weight: 6,000 kg, operating pressure: 290 bar, installation height: 500 mm, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Hfjdoylk Eajpfx Ahnei

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with 650 kN capacity. The machine was last in operation about 8 years ago. At that time, it had an issue with a hydraulic pipe (possibly a hydraulic oil leak or a leaking fitting). This was not repaired since the press was no longer needed. Otherwise, the machine had been running flawlessly up to that point. The press does not have UVV certification! Hjdpfx Ahex Ehmyenjfi

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Hfedex Ehlcjpfx Ahnei

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm Hfjdpfx Aeq Rhkwjhnji table surface area 600x410 mm ram surface 220x130 mm table height 850 mm weight of the machine ca. 2,5 t

Year of construction: 1978, condition: used, pressure 25 t distance between columns 580 mm stroke 150 mm dayligth 370 mm table surface area 560x400 mm ram surface 400x350 mm hole in the table 80 mm weight of the machine ca. 2,5 t Hjdpfxjlp U Aro Ahnofi dimensions of the machine ca. 1500x500x2500 m

Year of construction: 1999, condition: used, pressure 630 t passage width 1390 mm Hedslp U R Sspfx Ahnsfi stroke 400 mm table surface area 1390x1250 mm total power requirement 75 kW weight of the machine ca. 36 t dimensions of the machine ca. BxTxH 3200x2800x4000 mm

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm Hfsdpfx Ahelp Uz Uenji ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Year of construction: 1979, condition: used, pressure 160 t Hfedpfjlp Uz Rsx Ahnji distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm table height 900 mm Hfsdpslp U A Iofx Ahnei tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Year of construction: 1991, condition: used, pressure 100 t passage width 810 mm Hsdpfx Aslp U D Njhnofi stroke 400 mm table surface area 1140x740 mm ram surface 1140x740 mm dayligth 670 mm weight of the machine ca. 8 t dimensions of the machine ca. 1800x1800x3000 mm

Year of construction: 1976, condition: used, pressure 250 t distance between columns 900 mm stroke 300 mm table surface area 850x900 mm Hfsdpfx Aolp U A Sjhnoi ram surface 800x880 mm stroke 300 mm table height 1050 mm

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm Hfjdpfelp U Eusx Ahnsi column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Condition: used, Year of construction: 1992, pressure 300 t passage width 1350 mm stroke 500 mm column travel -side 830 mm table surface area 1350x1380 (1870x1380) mm table height 1060 mm Hfodpevn U Srofx Ahnei total power requirement 45 kW weight of the machine ca. 20 t dimensions of the machine ca. BxTxH 2500x2000x3950 mm

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm stroke 100 mm table surface area 440x320 mm Hsdpfx Ahevnwd Dsnofi ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Year of construction: 1991, condition: used, pressure 150 t Hodjlp U R Depfx Ahnofi passage width 1100 mm stroke 500 mm table surface area 1100x1070 mm ram surface 1100x1070 mm hole in the table 475x450 mm table height 920 mm dayligth 800 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x3600 mm

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Hfjdpsf Rt Irsfx Ahnsi