BST Maschinen Vertriebs GmbH

Condition: excellent (used), Year of construction: 2007, Press force: 2,000 kN Table surface: 2,300 x 1,100 mm (W x D) Through-hole openings: 2 x 700 x 300 mm Distance between Columns: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Side clearance: 740 mm Installation height: 550 mm (lower stroke, upper adjustment) Stroke rate: 30 - 140 rpm, continuously adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design: • Siemens + Beckhoff control system • 8-way sliding guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram weight compensation • Electric motorized stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, 300 mm spacing) • Vibration-damping machine feet • 4 tool locks + 4 cam outputs • Ram with 20 mm wide center groove • Hydraulic tool clamps on the table and ram • Hydraulic roll blocks for tool changes Kemmerich strip processing system, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Strip width: 100 - 600 mm Spreading range: 470 - 520 mm Coil – outer diameter 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic spreading via sliding wedges • Rear support disc and 3 attachable limit arms at the front • Hydraulically operated and driven pressure roller, laterally adjustable via handwheel • Loading chair (stationary, reel moves hydraulically), lifting height 770 mm with 4 limit bars Straightening Machine Nwelev T Anlshcdw Def Type: RMBMZ 50.600 UF Strip Width: 40 - 600 mm Strip Thickness: 0.5 - 4.0 mm Straightenable Cross Section: 1,200 mm² Number of Rollers: 9 Diameter of Straightening Rollers: 50 mm Number of Pulling Rollers: 2 Diameter of Pulling Rollers: 100 mm Speed: 3 - 25 m/min Design: • Rollers hardened, ground, and hard-chrome-plated • Lower straightening rollers and feed rollers driven by gears • Motorized adjustment of the roller frame via motors, adjustment accuracy 1/100 mm, values can be saved • Upper rollers can be lifted by 100 mm • Feed roller can be lifted pneumatically • Lateral strip guidance at the inlet with handwheel and Threaded spindle • Outfeed roller cage and loop bridge • Loop control via ultrasonic transducer • Hydraulically operated insertion aid, consisting of a table with an extendable tongue and an upper bending roller Roller feed Strip width: max. 600 mm Design: • Hardened, ground, and chrome-plated rollers • Driven by gear motor • Hydraulically liftable upper roller • Hydraulic height adjustment • Lateral strip guide at the inlet with handwheel • Roller cage Additional design: • Pneumatically pivoting loop bridge between the straightener and feeder • Safety fence around the entire system • Coiler and straightener on a shared base frame • Various replacement rollers for the straightener

Condition: good (used), Pressing force: approx. 4 tons Table size: 400 x 300 mm (W x D) Opening in the table: Ø 133mm Plunger size: Ø 70mm Projection: 178 mm Installation height: 240 mm (stroke at the top) Stroke: 1...100 mm Weight: approx. 480 kg Drive power: 2.2 kW Other • hydraulically driven • stroke rate continuously adjustable • with protective screen for inserting work with secure tools • with height-adjustable mounting angle (feed optional) Nelhcdwsvxvtxe Dswf

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Pedal adjustment: 25 mm Other Nwelhcdwsvnrhws Def • Rotating wedge coupling • Foot release • Control and protective screen as new, only used very little • Without table

Condition: used, Coil weight: 150kg Strip width: max. 220mm between keeping discs Outer diameter: max. 850mm Inner diameter: 250 ... 450mm Execution: Nwslovl Euljhcdw Dof • Driven by electric motor • Lateral keeping discs for front and backside • Loop control by sensor at machine foot

Condition: used, Year of construction: 1982, Load capacity: 1,000 kg Length of the support arms: 600 mm Band width: max. 520 mm between the limit rings Coil diameter: max. 1,400 mm Spreading range: 470 ... 530 mm, via hand crank Design: • Spreading using a hand crank • Manually adjustable disc brake Nwslhcdjun Tfgsw Def • 6 side limiting arms

Condition: used, Year of construction: 1973, cutting capacity: 240 mm, saw blade length: 480 mm, overall weight: 1,050 kg, Automatic saw, old but rarely used and therefore in good condition Hydraulic clamping of the workpiece on the saw blade and in the feed Feed length max. 750mm Nelhcdjuan Ufsw Dewf with new saw blade with 2x lines for coolant and lubricant

Condition: used, Coil weight: 400kg Strip width: max. 300mm between keeping discs Nslst H Egaohcdw Dswf Outer diameter: max. 1.200mm Inner diameter: 280 ... 580mm Execution: • Driven by electric motor • Lateral keeping discs for front and backside • Loop control by sensor

Condition: used, Coil weight: 1.000kg Length of arms: 400 mm Strip width: max. 300mm between keeping rings Outer diameter: max. 1.400mm Inner diameter: 320 ... 620mm, expansion motorized Execution: • Driven by electric motor • Speed adjustable by potentiometer Nwolet H D Trshcdw Def • Working direction right / left changeable by switch • Lateral keeping rings at front and backside • Pneumatic pressure roll • Loop control by ground contact

Condition: good (used), Year of construction: 1986, Power: 400kN Size of bolster: 900 x 1.280 mm Size of ram: 900 x 1.2200 mm Weight of mold: max. 7.000kg Power main motor: 7,5 kW Stroke: 1.000 mm - With movable bolster Njlhcdethdbnew Djwf - Bolster can be swiveled Weight: app. 7.000kg

Condition: excellent (used), Year of construction: 2000, Coil weight: 3.000 kg Number of revolutions: 5 – 30 1/min Table – Ø: 1.400mm Strip width: max. 150 mm Height of coil max. (incl. pallet): 850 mm Machine weight: 600kg Size: app. 1.900 x 1.400 x 2.000mm Execution - Solid welded frame - Loop control by dancer arm with counterweight - Speed adjustable stepless - Speed pre adjustable by poti Nslhcstgvv Tjdw Djwf - Working possible cw or ccw - 3-point fixation for inner coil

Condition: good (used), Functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Reel Make: Dimeco Type: 2371 E-FPS Nsljtgvgpehcdw Dswf Year of manufacture: 2006 Load capacity: max. 3 tons Band width: max. 600 mm Spreading range: 470 – 530 mm Coil – outer diameter: max. 1,400 mm Equipped with: • Hydraulic spreading • Pneumatic pressure roller from above • 6 band limiting arms 2. Straightening machine Make: Dimeco Type: 1676 C-VV Year of manufacture: 2000 Band width: max. 400 mm Band thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of infeed and outfeed rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic band Insertion aid with support table, insertion tongue, pressure arm from above • Pneumatically ventilated insertion roller • Lateral belt guide rollers • Pneumatically adjustable belt transfer table

Condition: good (used), Year of construction: 2009, Functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Nwjlhcoq A Tw Rsdw Def Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Nwolhcdopvlf Sjw Dof Number of rollers: 2 pcs. Ø 120 mm

Condition: excellent (used), Year of construction: 2006, Coil weight: 2.000kg Strip witdh: max. 500mm Njlhcdwspkz Dpe Djwf Outer diameter: max. 1.400mm Inner diameter: 350 ... 550mm, hydraulic expansion Performance - Frame made in soli welded steel - Expansion of mandrel hydraulic - 6 pc. coil keeping arms - Drive by electric motor with inverter - Loop control by ultrasonic sensor - Cabinet free standing - Pneumatic pressure roll from top side - motorbrake - Swiveling control board - Decoiler can be moved hydraulic - coil loading device can be swiveld 90°

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Nwjlsnr E Enohcdw Dsf Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Load capacity: 2 x 500kg Mandrel length: 150mm, can be easily extended after consulting the manufacturer Coil diameter: max. 1,600mm Njlhcsmdrz Ssdw Dowf Spreading range: 250 ... 660mm Motor power: 2 x 0.75 kW Speed: 1 - 10 rpm adjustable via ultrasonic sensor Design: - Frame in stable welded construction - Reel shafts mounted with maintenance-free roller bearings - Manual spreading via hand crank - Separate control panel - Drive continuously adjustable via SEW motors and converters - Attachment disc at the rear, limit ring at the front - Loop control via ultrasonic sensor - Loop side guide including loop tightening switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for coil protection Machine was only in operation for a short time!!

Condition: like new (used), Year of construction: 2018, Load capacity: 2 x 500kg Mandrel length: 150mm, can be easily extended after consultation with the manufacturer Nwelhcjmdrz Dsdw Dsf Coil diameter: max. 1,600mm Spreading range: 250 ... 660mm Motor power: 2 x 0.75 kW Speed: 1 - 10 rpm adjustable via ultrasonic sensor Design: - Frame in stable welded construction - Reel shafts mounted with maintenance-free roller bearings - Manual spreading via hand crank - Separate control panel - Drive continuously adjustable via SEW motors and inverters - Attachment disc at the rear, limit ring at the front - Loop control via ultrasonic sensor - Loop side guide including loop tightening switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for coil protection Machine as good as new, has never been in operation !!!!!

Condition: excellent (used), Year of construction: 1994, Load capacity: 1.000kg Lifting height: 1.600mm Nelhjlbgg Escdw Dswf Display of charging status via LED Built-in charger with Schuko plug own weight: 380kg equipped with electric lifting and driving drive well suited for transporting euro pallets wing switch for stepless speed regulation short operating arm for small space conditions with warning horn

Condition: ready for operation (used), Machine has been rebuilt in 1981 and got control for hand working Power: 32 to Size of bolster: 700 x 650 mm Nelhcdsk S Efhsw Djwf Overhang: 340 mm Stroke: 16 - 63 mm Ram adjustment: 10 mm Other can be used for safe 2-Hand working euqipped by safety valve Herion Xsz 20 table can be moved in height Stand alone control panel machine and control assembled on solid steel plate

Year of construction: 2003, Condition: good (used), Extraction unit as tabletop unit Nwjlheiwgbtscdw Djf working area approx. 620 x 360 x 450mm large drawer to collect the sucked material Control unit RE 1.5 for 5 different blower levels

Condition: ready for operation (used), Punching force: max. 20 to stroke length: 16 mm strokes: 200, 300, 400, 600 1/min motor power: 4kW working ranges: transverse (x-direction) 1.000mm longitudinal (y-direction) 500mm working area max. 500 x 1.000mm Nwolhcjiknyhsdw Def table area: 875 x 1.600mm (without outrigger) weight: approx. 4.500kg Power: see photo data sheet Big number of stamping units as accesoirs with the machine Machine can still be seen under power at the last working company

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Nwelhcdwjh Uhb Sj Dsf Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: excellent (used), Year of construction: 1999, Coil weight: 150kg Strip witdh: max. 100mm Outer diameter: max. 1.200mm Inner diameter: 320 ... 520mm Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake Njljh T Ducehcdw Dswf

Condition: ready for operation (used), 400V 1.474 rpm Njlhcsg Tv Ikjdw Djwf 37kW 118A This motor has been removed from a machine which got a new control. It was working until the last day.

Condition: ready for operation (used), 400V 1.482 rpm 75kW 138A This motor has been removed from a machine which got a new control. It was working until the last day. Njlhcdsg Tv Igow Dewf