Condition: used, functionality: fully functional, Year of construction: 2019, Info: Max.Glass Dimension: 1800*2800mm (bottom floor); 2000*3000mm (top floor) Max.Glass Thickness: 15+15mm Min. Glass Thickness: 3+3mm EVA Film Thickness: 0.25-0.76mm Machine dimension: 3680*2260*1650mm Machine weight Njdpfxjwarqzo Adbowc The Sager SG-3000-2DD laminating furnace is a professional, non-autoclave machine designed for producing various types of laminated glass, particularly with EVA film. Its double-layer design allows for continuous production cycles, saving time and power. Key Features and Specifications Non-Autoclave Operation: The primary feature is the ability to produce laminated glass without requiring an autoclave, offering a more flexible and cost-effective solution. Double Working Stations: The "2DD" indicates a double-layer design, which allows glass in one chamber to be heated while the next batch is being prepared, increasing production efficiency. PLC Control System: The machine utilizes a PLC (Programmable Logic Controller) with a touchscreen interface for easy and precise control of all parameters, including multi-step heating programs. Versatility: It can produce a wide range of decorative and functional laminated glass by inserting various materials between glass sheets, such as silk, paper, plastic film, metal mesh, fiber, or PDLC film. Max. Glass Size: According to Sagertec.en.made-in-china.com, the maximum glass size the furnace can handle is 2000 x 3200 mm. However, another source, GMR, lists slightly different dimensions for used models: 1800 x 2800 mm (bottom floor) and 2000 x 3000 mm (top floor). Max. Glass Thickness: The maximum glass thickness is listed as 15+15mm (for a used model) and up to 64.5mm in another listing. Temperature Control: Temperature is precisely regulated by changing the voltage volume. Vacuum System: It includes a robust vacuum system with multiple vacuum bags (typically 4 sets) to ensure proper lamination

Condition: used, Year of construction: 2004, Bystronic laminated glass cutting table Nwodpfsvzhh Hox Adbjc Lamicut 3700 mm S-CUT-1212

Year of construction: 2011, condition: like new (used), functionality: fully functional, Light Overhead Crane ABUS floor structure with rails1000kg Lifter KAPPEL MDSHH-400 kg cy 2011 Hoist SWF 500 kg L x W10 m x +/_ 7 m H 5,5 m 500KG overhead crane Nwsdpfx Adjvzahfjbec S-GSL-017

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, Lisec Nwodpfevy Ef Hex Adbec FPS-25/20U2 2011 Lisec gas press 2000 x 2500 mm Right -Left S-IGL-1892

Condition: excellent (used), Year of construction: 2012, back gauge travel distance R-axis: 2,700 mm, Bystronic ZPG 2700 x 3500 VR SP 1AS 2011 Nodsvy Enzjpfx Adbjwc 2300 x 4500 mm 15 mm 60 mm 1000 kg S-IGL-2284 R-L

Condition: used, Info: Conveyor with air-cushion support TB-V-LK 1,5 x 1,3, 1300 mm long + Gas-filling & press robot ZP 1,6 x 2,5 VR SP G 1 AS, spindle driving, 2700 mm long Nedpovy Eyqsfx Adbjwc

Condition: good (used), Year of construction: 2010, functionality: fully functional, total length: 20,000 mm, Transport conveyers LISEC Transporteinheit 3300 x 4000 mm LISEC Transporteinheit S 3300 x 4500 mm LISEC Transporteinheit 3300 x 6800 mm LISEC Transporteinheit Mobile 3300 x 2800 mm Year: 2010 Pyrosil ST-SystemSt 1000 HD -1B System 500 HE (Pyrosil application for UV Ink) Pyrosil System 500 HE (Pyrosil application for UV Ink) Primer Station 500 HE LISEC Abluftanlage Vorbehandlung LISEC Anlagensteuerun S-LTD-235 Parmeter Flame: Berner speed 150 mm/sec 7,4 Hz Frequenz at FU 2 flows Sollwert Luft 400l/minVerhältniss Gas/Luft 1:21 Precursor 0,3 % Parameter Primer: Nsdpfx Ajvy D Tijdbjwc Speed Primer 300 mm/sec14,8 hz Frequenz at FU Flows 2 Druck vorratsbehälter 1 Bar Zerstäuberdruck 2.0 bar Sprühmenge 25 mi/min pro Sprühkanal Steuerdruck lower than 6 bar, has no influance at the Sprayvolume. Only the valces for sprayheads will be opened

Year of construction: 2021, condition: like new (used), functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) Nwsdpfx Adstwphwebec - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, total length: 2,500 mm, total width: 2,000 mm, working height: 2,000 mm, VSA-25/20D1 RTVB-11-20ST Nwodpevyzatefx Adbec SSV-20 Lisec VSA-25-20D1 2000 x 2500 S-IGL-1878

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working height: 2,700 mm, Equipment: documentation/manual, Double glazing line R-L 2300 x 3500 with gas press 2700 x 3500 mm cy 2012 upgrade with new a press 2004-2007-2012 Typical Components and Process A standard Glaston Bystronic insulating glass line in this size range generally includes the following sequence of machines: Vertical Infeed Conveyor Table: The initial loading point for the raw glass plates. Washing Machine: Cleans the glass plates thoroughly, often using demineralized water (reverse osmosis). Nwjdpjvuhfljfx Adbec Inspection System: Allows for visual quality control of the glass surface before assembly. Assembly, Gas Filling, and Press Robot: This central unit assembles the glass panes with the spacer frames, presses them together, and simultaneously fills the unit with inert gas (e.g., argon) for enhanced insulation. Sealing Robot: Automatically applies the secondary sealant (polysulphide or silicone) around the perimeter of the assembled unit to ensure durability and gas tightness. The Bystronic IGL 2276 is a production line used for manufacturing insulating glass units. This equipment is associated with the production of double-glazing units and features components for washing, assembly, and gas filling. Maximum Glass Dimensions: The line is designed to process glass plates up to 2300 mm x 4500 mm. Minimum/Maximum Glass Thickness: It can handle insulating glass units (double or triple) with a thickness range of 15 mm to 60 mm. Unit Weight: The line is capable of handling units weighing up to 1000 kg. Configuration: The designation "R-L" (Right-Left) indicates the operational direction of the line. Process Capabilities: The line is designed for automated production of rectangular insulating glass units, and some shaped units that comply with specific technical guidelines. Glass Machinery Reconditioners Washing Machine: A glass plate washing machine, such as the GW D 2300 VR 3 B 15, to ensure cleanliness before assembly. Assembly and Frame-Mounting Station: An area where the washed glass plates are brought together and the spacer frames (e.g., Super spacer) are positioned. Gas Filling Press: A press, such as the ZPG 2700 x 3500 mm, for the assembly of the glass units and automatic filling with inert gas. Sealing Robot: An automatic sealing robot for applying the sealant (e.g., Polyurethane or Silicone) to complete the insulating glass unit.

Condition: used, Year of construction: 1998, functionality: fully functional, working height: 2,500 mm, vertical glass washer LISEC VHW 2500 V 6 Nedpstwn Hlofx Adbswc

Condition: good (used), Year of construction: 2005, Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD Nwsdetwpatspfx Adbsc 15-60 mm 1000 kg

Condition: used, Year of construction: 2011, functionality: fully functional, Bystronic / 2300 x 4500 mm R-L 2300 x 4500 mm ( doch neu presse in 2011 von 2700 x 3500 mm) Nodpfx Asrr Tmcjdbewc 15-60 mm 1000 kg Washer GW D 2300 VR 3 B 15 Gas press ZPG 2700 x 3500 mm VR SP 1 AS 15-60 mm 2300 x 4500 mm 1000 kg cy 2011 Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg 1-Kopf Versiegelungsautomat / 1 / GMR Stock Place: GMR ES

Condition: used, Year of construction: 2007, functionality: fully functional, Lisec KSR 3000 x 5000 mm Left-Right Nwedpfx Aorr S I Hjdbec

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport - tilting table (discharge) Description of Line Components Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection The Klöpper Vertical washer 2600 R-L is an industrial vertical washing machine designed primarily for cleaning glass sheets as part of a processing line. It is an integral component often found in a larger system including loading stations and tilting tables. Key Features and Components Vertical Infeed Transport: Glass sheets are loaded vertically onto a tilting table from a glass rack, and then moved into the washer. Washing & Drying Sections: The machine features a dedicated washing section and drying section. Washing: The system uses a cascade system for energy and water savings. The pre-rinsing section utilizes flat jet spraying nozzles with city water to remove coarse dirt particles, which are led directly to the drain to reduce contamination of the de-ionized water (DI-water) circuit. The main washing section includes three pairs of brushes, three vats, and three pumps, Drying: The drying section includes two pairs of drying nozzles to ensure dry edges. Njdpfewii Hfox Adbewc R-L Configuration: The "R-L" in the name indicates the working direction, which is from right to left. , inspection transport, and a tilting table at the discharge point for horizontal outfeed. Total Height: The washing machine has a total height of approximately 2,600 mm

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, Lisec superspace VSA 25 The LiSEC VSA (Vertical Spacer Applicator) 25 D1 is a fully automatic, high-precision machine designed for applying flexible, warm-edge spacers (such as Super Spacer) to glass sheets during the production of insulating glass (IG) units. The "25" indicates a maximum glass handling height (2,500 mm), while the "D1" signifies a, often, specialized applicator head designed for high efficiency in applying spacer materials, particularly with, but not limited to, two-track systems for fast, varied-width production. Nwjdpfsrr Sy Asx Adbec Key Features and Capabilities: Fully Automatic Application: The machine automatically positions, feeds, applies, and cuts the flexible spacer material to size, ensuring a continuous, 90-degree perfect corner seal. Two-Track Applicator Head: The D1 variant is specifically known for its, or can be equipped with, a two-track application head, allowing the machine to handle two different spacer widths simultaneously. This is ideal for manufacturing 2-fach (double) or 3-fach (triple) IG units with different air gaps without stopping for material changes. Climate-Controlled Magazine: Spacers are stored in an air-conditioned, humidity-monitored, airtight container, ensuring the adhesive properties and material flexibility are maintained for perfect processing. Precision and Speed: Patented, low-friction application techniques provide high-precision positioning with very short cycle times, making it ideal for high-speed, high-volume production lines (e.g., Velocity Plus). Integrated Butylation: The applicator head includes a built-in system for applying a butyl cord to the spacer, ensuring airtight, high-quality insulating glass units. Optimized Corner Quality: A special, automated corner punching device ensures the spacer is applied with precise, 90-degree corners, improving the structural integrity and seal. Reduced Waste: The machine includes a system for controlled disposal of corner punch waste, keeping the work environment clean. Technical Specifications (Typical of the 25/20 Series): Maximum Glass Size: 2,500 mm x 2,000 mm (can vary by specific configuration). Minimum Glass Size: 350 mm x 180 mm. Total IG Thickness: 12 to 60 mm. Glass Thickness: 3 to 15 mm. Spacer Widths: Capable of handling materials from 8 to 25 mm. The LiSEC VSA 25 D1 is a critical component in advanced insulating glass lines that prioritize speed, accuracy, and the ability to handle flexible, warm-edge, and complex, multi-component insulating glass units.

Condition: good (used), Year of construction: 2006, 2-component silicone system Nedpfoycv Sgjx Adbswc Swivel arm length: 2200 mm Width: 1180 mm Depth: 1000 mm Height: 2450 mm with swivel arm removed Weight with barrel: approx. 450 kg Condition: good, second-hand

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 6,600 mm, total width: 2,700 mm, total height: 3,100 mm, input voltage: 400 V, overall weight: 2,100 kg, power: 32.79 kW (44.58 HP), Neptun Washing Machine Superinox 2062 S - Year: 2012 - Condition: used (full refurbishment possible) - Model: Superinox 2062 S Nwedpfx Aox R Slysdbec - Length: 6600 mm - Width: 2700 mm - Height: 3100 mm - Glass thickness: 3-60 mm - Working height: 550 mm - Inlet and outlet: 2000 mm - Brushes: 6 pcs - Weight: 2100 kg - Speed: 1-8 m/min - Minimum dimensions: 400 x 100 mm

Condition: used, Year of construction: 2008, BOTTERO 520 LAM-37 - Year 2008 Cutting table for laminated glass Fixed worktop with flap Air cushion support Max. cutting length: 3700 mm Min. cutting length: 250 mm Nwodpfxsxqyu To Adbsc Thickness: 3-10 mm (monolithic) 2+0.38+2 mm min. (laminated) 8+4.56+8 mm max. (laminated) Speed: 100 m/min Installed power: 15 kW

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Nwodpfxerhkp Es Adbjc Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT Nwedpfjxf Hm Sex Adbjc 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Condition: good (used), Year of construction: 1996, functionality: fully functional, Bavelloni CR 1111 Glass Edging Machine – vertical, 11 wheels Year: 1996 Speed: 0,5 – 5 m/min. Glass thickness: 3 – 30 mm 400 V, 3~, 50 Hz, 24 kW, 63 A Dimensions: 8100 x 1200 x 2300 mm. Weight: 4000 kg Inspection is possible by appointment. In good working condition. Available: NOW. Nsdpsv Nag Refx Adbjwc

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace TAMGLASS, HTF-2136-ABT-10-R Njdpfsvkhl Dex Adbjwc 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Noise reduction cabin included 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) In good technical condition. Inspection is possible by appointment.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON Nwjdpfx Adoxtf Dfsbec HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included 160 kW compressor for 3 mm glass included In good condition.

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 1500 x 3000 mm, Right – Left Year: 1997. Nodpfxjxguqne Adbewc 415 V, 50 Hz, 3 Ph. In good technical condition. Disassembled and ready for loading.