Condition: ready for operation (used), Year of construction: 2001, A Bottero glass cutting machine is available. Cutting thickness range: 2mm-19mm, max. glass dimensions X/Y: 3650mm/2750mm, weight: approx. 1650kg. On-site inspection is possible. Bledpfx Agjudinuszed

Year of construction: 2017, condition: ready for operation (used), A rotating wall for the glass industry is available. Weight: approx. 1300kg. Bsdpfx Agstvgraozeld

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Bsdpfxjx Hff Sj Agzsld

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Bedpfx Ajxg Rhpogzold

Year of construction: 2016, condition: ready for operation (used), A Lisec horizontal conveyor field is available. Pressure: 6bar, max. conveyor weight distribution: 50kg/m², weight: approx. 1450kg. Bsdpfx Ajtvgq Iegzeld

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Bedoxcx A Tspfx Agzjld

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Bedpfx Agjt R Tq Iozsld

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, FOR SALE LINE FOR COLLECTING GLASS AND FOR COLLECTING WITH TURNING CHINESE PRODUCTIONS VERY SMALL USED FOR COLLECTING IMMEDIATELY SALE DUE TO CHANGE OF CONCEPTION Bljdpfxjwavbqe Agzed

Year of construction: 2020, operating hours: 500 h, condition: like new (used), functionality: fully functional, For sale a line for collecting and receiving glass with a turntable, very little used, for testing in our company the concept has changed and we are selling Blodpfewavnqsx Agzjd

Condition: used, Year of construction: 2010, machine/vehicle number: GG710C-18759, functionality: fully functional, input voltage: 400 V, input current: 8 A, type of input current: three-phase, total width: 2,000 mm, total length: 2,500 mm, total height: 2,000 mm, overall weight: 850 kg, drill diameter: 140 mm, pressure: 6 bar, spindle speed (min.): 3,800 rpm, One semiautomatic glass drilling machine, with two opposite heads available in 03-2026 (still in production). Max sheet size: 2600x1350mm. Min sheet size: 80x80mm. Max tool diameter: 140mm. Glass thickness from 1.8 to 55mm. Spindle speed: 3800rpm. Blodpfsyc Egyex Agzod

Year of construction: 2006, condition: good (used), Suction lifter Vertical lifting capacity 600 kg Support tube length: approx. 2.9m-3.5m Bjdpfju R Rp Nox Agzold Load capacity per suction cup 100kg Connected load: 400V/50Hz 3Ph./1.9A External dimensions: Width:2900mm Height: 1200mm Depth: 280mm Weight: approx. 104kg

Condition: repair required (used), Year of construction: 1996, functionality: fully functional, input voltage: 415 V, overall weight: 2,960 kg, power: 5.5 kW (7.48 HP), Lisec spacer bar bending maching BSV-45A, year 1996/2007, needs small repairs but is fully functional modified by Lisec in year 2007 to bend additionally stainless steel profiles (Nirotech, Chromatech Plus), electronic clamping pressure regulator for different material thicknesses. Last company was also bending TGI by using standard aluminium tools..... Bedertpuzepfx Agzold Machine is coming with bending tool for 16 mm aluminium Minimum frame size: 250 x 80 mm Maximum frame size: 4000 x 2200 mm (split frame) Profile widths: 6-24 mm Running direction: left/right Power supply: 3/N/PE-50Hz-415V, 24VDC control voltage Shapes: according Lisec shape catalogue, including arc shapes (for aluminium only) 4-slot spacer bar magazin PM-45/4 Machine is complete and was in full operation unit dismantling During transportation small damages happend..... Can be seen in our warehouse in Hofkirchen/Austria on appointment

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 23,000 mm, type of input current: AC, number of chambers: 1, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / GLASTON, HTF-2442-CTA-10-L 2400 x 4200 mm, Left – Right Year: 1999. With convection (Low-E glass) Noise reduction cabin included. 400 V, 50 Hz, total power: 1160 kW (heating 630 kW, motors 530 kW) Bljdpsylaqlefx Agzsd In good technical condition. Inspection during production is possible by appointment. Available: SEPTEMBER 2026

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: GG520A-17518 & GG502S-16471, total width: 5,100 mm, total length: 5,350 mm, total height: 1,500 mm, overall weight: 3,250 kg, type of input current: three-phase, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 3,700 mm, Maximum measurement: 3210 mm Minimum measurement: 150 mm Maximum cutting length: 3700 mm Minimum cutting length: 250 mm Monolithic: 3–10 mm Laminated: minimum 2+0.38+2 (22-1) maximum 8+4.56+8 (88-12) Blodpfjycgiiex Agzed Maximum glass weight for loading/unloading on arms: 450 kg

Condition: used, • A-frames for jumbo dimensions • 5 feet form one frame - 30 feet available = 6 frames Bjdsyf En Aepfx Agzold • Cross tubes included • Glass support area: 2 x 280 mm • Price: €300 / unit

Condition: used, • Bar cart • Length = 1600 mm • Width = 1200 mm • Height = 2600 mm Bjdsyf Efnopfx Agzeld • 50 compartments • 20 units available

Condition: used, • Can rotate and tilt • Automatic suction system Bljdjyf Ecmopfx Agzod • Equipped with air cylinder • 8 suction pads • 4 adjustable • Load capacity – 150 kg • Weight – 170 kg

Condition: used, Manual sealer Reinhardt Bledpjyf Eb Nofx Agzed

Condition: used, • Glass transport rack for double-sided loading • Length: 3,390 mm • Width: 1,100 mm • Loading height: 2,000 mm / possibility of overloading upward Bodpfx Aoyf Eafsgzeld • Total height: 2,240 mm / incl. crane rings • Support depth per side: 400 mm / 390 mm usable • Load capacity: 2,000 kg 45 units • Price on request

Condition: used, scoring head, glass cutting table, glass cutting table, glass cutting machine Bedpfxsb Nfcuj Agzold -Number: 21x scoring heads available -Manufacturer: Eitzenberger Luftlagertechnik GmbH -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs

Condition: used, Circuit board for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS -Type: ZSB circuit board Impala 6x -Weight: 0.1 kg Bledpfx Ageb Nktzozed

Condition: used, Precision bending beam for glass cutting table, glass cutting table, glass cutting machine Bljdpfx Agob Nkt Eozsd -Manufacturer: INNOLAS S100-5N -Type: NJ Y123/101 -Weight: 0.1 kg

Condition: excellent (used), Year of construction: 2005, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 4,120 mm, travel distance Y-axis: 2,310 mm, For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced. The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet. Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled. Bedoymgfljpfx Agzold Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry. Technical specifications: 1. Working area: 4.12 × 2.31 meters 2. Software: ICam 3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs) 4. 3 reference starting points 5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used. The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility. Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed. A VAT invoice will be issued. The listed price is NET. Possible disassembly date: From 10/02/2026 onward. Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased. Preferred contact method: email.

Condition: used, Year of construction: 2003, Second hand straight line edging machine SCHIATTI type FPS15S, year 2003 Bsdpfx Agox U Edwszsld

Condition: used, Year of construction: 2021, functionality: fully functional, ZAFFERANI AZV MILL 1000 – Year 2021 Bledsylvb Tjpfx Agzsd Vertical CNC Drilling/Milling Machine Working area 200 x 1000 mm Min. glass dimensions 500 x 300 mm Max. glass dimensions 3400 x 3210 mm Thickness 3–25 mm Minimum hole diameter 8.5 mm Power 8 kW