Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, Glastronic-made 1600mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. Nwsdjz Ngyrepfx Akien New squeegee rubbers, new bearings. Working direction: left to right. Maximum washable glass height: 1600mm. Number of brushes: 4. Drying fan. Stainless steel cabin. Water heating. Backlighting. Stop sensor. The machine has been fully inspected, cleaned, and is in perfect working order and can be viewed at our facility!

Condition: good (used), Year of construction: 2006, functionality: fully functional, 10 cup wheels vertical glass grinding machine min. glass size : 40 x 40 mm glass thikness : 2 - 30 mm Nwedezz Hirspfx Akisn speed : 0,35 - 5,4 m/min. machine dimensions : 7900 x 1200 x 2900 mm worki,g height from conveyor : 850 mm power : 30,5 Kw weight : 4100 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit in case of furnace overheating. * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. -Log of all operations and alarms. -Program < EASY MAINTENANCE > for vacuum pumps. -Delayed start of the process (for night use) -kW meter. -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance Nwsdpjz Ihikefx Akion LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, automatic laminated glass cutting table for glass sizes : 3710 x 2600 mm max. glass cut : 3700 mm laminated sheet thikness : 33.1 - 88.12 - 1010.4 float glass thikness : 3 - 10 mm min. squaring : 110 mm max. squaring : 2750 mm min. breaking : 60 mm min. separation : 60 mm Nedpfx Akoz Nft Djiown work table height : 900 mm machine dimension : 5000 x 3500 mm including loading table BAVELLONI REV 372 R with integrated loading arms max. loading glass size : 3710 x 2600 mm machine dimensions : 3500 x 4250 mm total dimensions for both tables work space : 7000 x 5000 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 5,650 mm, total width: 1,600 mm, total height: 2,520 mm, overall weight: 1,500 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, vertical glass wasching machine 1600 mm OPEN TOP working direction : from LEFT to RIGHT min. glass size : 350 x H100 mm max. glass weight : 200 Kg in- en outlet conveyor size : 2000 mm working height : 550 mm glass thikness : 3 - 15 mm number of brushes : 4 Nwedez Dt Rfspfx Akisn brushes diameter : 120 mm speed : 0,5 - 5 m/min . total power : 7 kw machine body in stainless steel

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: BG56, CMS YPSOS BG56 – Vertical CNC Glass Processing Centre with LV2800 Vertical Glass Washing Machine Vertical CMS Brembana YPSOS BG56 CNC glass processing centre equipped with two front working spindles and one rear spindle. The machine has two tool magazines. The front magazine has a capacity of 13 ISO40 tools, while the rear magazine has a capacity of 6 ISO20 tools. The offer also includes a Stefiglass LV2800 6br 3/20+PW vertical glass washing machine. The washer is equipped with six brushes, pre-washing, washing and drying sections, as well as soft brushes suitable for Low-E glass. Its construction is made of AISI 304 stainless steel. Key Specifications of the CNC Centre: - Manufacturer: CMS Brembana - Model: Ypsos - Serial number: BG56 - Year of manufacture: 2022 - Total weight: 12,000 kg - Power supply: 400 Vac +10%/-15%, 60 Hz, three-phase - Compressed air pressure: 6 bar - Compressed air connection: 1/2" - Clean water consumption: 30 l/min - Water pressure: 3–6 bar - Maximum glass size: 2,800 × 4,500 mm - Minimum glass size: 270 × 420 mm - Glass thickness: 3–30 mm - Front tool magazine: 13 positions, ISO40 - Rear tool magazine: 6 positions, ISO20 Vertical Glass Washing Machine: - Manufacturer: Stefiglass - Model: LV2800 6br 3/20+PW Nsdpfx Akjz Il Rfjiown - Serial number: LV2428 - Year of manufacture: 2022 - Construction: AISI 304 stainless steel - Minimum glass height: 150 mm - Minimum glass length: 370 mm - Glass thickness for washing: 3–20 mm - Washing speed: 1–5 m/min - Number of brushes: 6 - Pre-washing, washing and drying sections - Soft brushes for Low-E glass A set of spare parts is included with the machines, together with an approximate valuation of the parts.

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, overall weight: 2,200 kg, type of input current: AC, Equipment: documentation/manual, We are offering this used LISEC LBH-25AR insulating glass manufacturing machine, manufactured in 2014, for sale. Serial/drawing number: 572-074946 Weight: 2,200 kg Rated current (full load): 10.0 A Apparent power: 7.00 kVA Voltage: 400 V Frequency: 50 Hz Short-circuit strength: 10 kA Pressure: 6.00 bar Degree of protection: IP32 Maximum current: 1.4 A AC/DC voltage: 400 / 24 V If you have any questions or require further information, please feel free to send us a message or call us. Nwedpfx Akozmn Iysisn

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm Nsdez N Dqujpfx Akijwn This table has NO option for low e deletion

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 114/2021, functionality: fully functional, operating hours: 120 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, total width: 1,700 mm, total length: 20,000 mm, total height: 4,000 mm, pressure: 8 bar, HIGH-SPEED DRILLING AND MILLING MACHINE: a compact, high-performance vertical machine suitable for drilling and milling rectangular glass sheets. Ideal for series production and can be integrated with grinding lines or used as a stand-alone unit. The machine can process glass with the following properties: Technical specifications of the drilling and milling machine: Technical specifications of the vertical washing machine Glass type: Clear/extra clear, coated, colored in the mass Glass shape: Rectangular Minimum dimensions of glass processed by the drilling machine: 500x300; minimum dimensions of glass for the washing machine: 150x400 Maximum dimensions: 2400x4000 Nwsdpez Ihfxsfx Akisn Thickness: 3-12 mm Hole diameter: 6-40 Working height: 600 ±50 mm Power: 22 kW

Condition: used, This Pannkoke pneumatic cutting table is being auctioned off online as part of our industrial auction / machinery auction due to the business closure of HERA Glas GmbH. Nsdpfo Aa Rk Ujx Akijwn You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1303, total width: 4,400 mm, total length: 3,300 mm, total height: 1,700 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 3,210 mm, feed length Y-axis: 3,300 mm, cutting length (max.): 3,300 mm, We offer this Hegla VSG-M 33 MT laminated glass cutting table, which is in very good condition and was manufactured in 2005. Manufacturer: Hegla Model: VSG-M 33 MT Nwodpfxjz Hl T Rs Akijn Year of manufacture: 2005 Condition: very good ID Category: 518 ID Machine Type: 898 Type: laminated glass cutting table If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. Nwsdpfjz Ru Iysx Akisn The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 589-03, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, power: 8.5 kW (11.56 HP), pressure: 6 bar, year of last overhaul: 2024, Glass grinding and polishing machine with 5 wheels. In normal, working condition. 5 Wheels Thickness 4 - 25 mm Min. dimensions 80x150 mm Speed 0,5-4 m/min. Power supply: 400V Nsdpfx Akjy Sw Ngoijwn

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC vertical glass processing centre with waterjet Working direction: from left to right Max. glass size: 6000 x 3300 mm Min. glass size: 600 x 200 mm Glass thickness: 3 - 25 mm Max. grinding speed: 25 m/min Line consists of: Nedpjz Syvxofx Akiown - Vertical CNC glass working centre SYSTRON proHD 6033 (year: 2016), - High-pressure waterjet pump THYSSENKRUPP HPS 4037, - Vertical glass washing machine LISEC VHW-33/V8 (year: 2011). Types of processes: - Grinding (inner and outer contours), - Polishing (inner and outer contours), - Drilling/counter-sinking/milling (by waterjet), More technical information can be found attached as Tech. data file Very good and clean condition Good working order, still in production As is Available in December, 2026

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic tiltable float glass cutting table for half jumbo sizes workable dimension : 3760 x 2760 mm 5 tool store the pc is supplied complate with CR ROM drive , 3,5" modem and network card , color monitor and windows with straight and shaped optimisation possibl for vinyl cut and digitalization with laser for templates glass thikness : 3 - 19 mm acceleration speed : 150 m/min cutting tolerance : 0,15 mm breaking bars : 2 + 1 workable table height : 900 mm machines sizes : L x w x H = 6000 x 2275 x 2250 mm installed power : 5,6 Kw weight : 2500 kg Njdpfoz Imnfex Akiswn

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000021766, Intermac VERTMAX 2.6 – Vertical CNC Glass Processing Centre with LiSEC WTL-25 Vertical Glass Washing Machine Vertical Intermac VERTMAX 2.6 CNC glass processing centre equipped with one front working spindle and one rear spindle. The machine has a total capacity of 37 tools, with 18 positions in the front tool magazine and 19 positions in the rear tool magazine. The offer also includes a LiSEC WTL-25 vertical glass washing machine equipped with six brushes, pre-washing, washing and drying sections. The washer is fitted with soft brushes suitable for Low-E glass. Key Specifications of the CNC Centre: - Manufacturer: Intermac - Model: Vertmax 2.6 - Serial number: 1000021766 - Year of manufacture: 2018 - Total weight: 12,500 kg - Maximum glass size: 5,000 × 2,600 mm - Minimum glass size: 500 × 300 mm - Glass thickness: 4–26 mm - Total tool capacity: 37 Njdoz Il Uqepfx Akijwn - Front tool magazine: 18 tools - Rear tool magazine: 19 tools Vertical Glass Washing Machine: - Manufacturer: LiSEC GmbH - Model: WTL-25 - Serial number: 311-057906 - Year of manufacture: 2010 - Maximum glass washing height: 2,500 mm - Minimum glass size: 350 × 180 mm - Glass thickness for washing: 3–15 mm - Transport speed: 4–8 m/min - Number of brushes: 6 - Pre-washing, washing and drying sections - Soft brushes for Low-E glass A set of spare parts is included with the machines, together with an approximate valuation of the parts.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 34608, total width: 3,700 mm, total length: 7,200 mm, overall weight: 3,500 kg, input voltage: 400 V, input frequency: 50 Hz, Air cushion table with breaker bars – tiltable with support Breaker bars: 3x X Nsdpfx Akez D H A Ioiewn 2x Y

Condition: excellent (used), Year of construction: 2013, 4 axes CNC work center for max. glass sizes : 3250 x 1620 mm for edging , milling and drilling and engraving Nsdpfx Ajz I Rgljkiown one 14 positions rotating tool change . spindle power : 15 kw spindle speed : 12000 rpm weight : 6450 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7421, CMS PROFILE 7421 – Vertical CNC Glass Processing Centre with 2500/SP Vertical Glass Washing Machine Vertical CMS Brembana PROFILE 7421 CNC glass processing centre equipped with one front working spindle and one rear spindle. The machine has two tool magazines. The front magazine has a capacity of 13 ISO40 tools, while the rear magazine has a capacity of 6 ISO20 tools. The offer also includes a Tomatiglass/EGS 2500/SP vertical glass washing machine equipped with six brushes, pre-washing, washing and drying sections. The washing machine is fitted with soft brushes suitable for Low-E glass. Key Specifications of the CNC Centre: - Manufacturer: CMS Brembana Nsdpoz Il Htefx Akiewn - Model: Profile - Serial number: 7421 - Year of manufacture: 2015 - Total weight: 10,500 kg - Power supply: 400 Vac +10%/-15%, three-phase - Compressed air pressure: 6 bar - Compressed air connection: 1/2" - Clean water consumption: 60 l/min - Water pressure: 3–6 bar - Minimum glass size: 420 × 270 mm - Maximum glass height: 2,600 mm - Glass thickness: 3–30 mm - Front tool magazine: 13 positions, ISO40 - Rear tool magazine: 6 positions, ISO20 Vertical Glass Washing Machine: - Manufacturer: Tomatiglass/EGS - Model: 2500/SP - Serial number: 1560408 - Year of manufacture: 2008 - Glass thickness for washing: 3–19 mm - Number of brushes: 6 - Pre-washing, washing and drying sections - Soft brushes for Low-E glass A set of spare parts is included with the machines, together with an approximate valuation of the parts.

Condition: excellent (used), Year of construction: 2007, Vertical glass washing machine Maximum glass height: 3300 mm Working direction: from right to left Nweds Afnq Njpfx Akien 6 brushes Very good and clean condition As is Available immediately

Condition: excellent (used), Year of construction: 2014, 3 axes CNC work centrer for max. glass sizes : 1250 x 2450 mm for edging , drilling and milling . working videos can be send on demand . Nedoz I N Ihjpfx Akiewn

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-232.0495, total length: 12,000 mm, input voltage: 400 V, feed length X-axis: 2,300 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, Automatic butyl extruder in excellent condition, technically refurbished by Glaston in 2025. Upgrades to the operating panel and replaced parts are listed; please contact us for more information. Maximum size: 2300x2500mm Minimum size: 250x250mm, but not suitable for Georgian bars. Njdpfx Aozw Erwekiswn

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-275.0335 / L-288.0125, total length: 6,000 mm, total height: 3,800 mm, overall weight: 350 kg, Bystronic Swivel Crane with Suction Device Bystronic Swivel Crane - Model: SSK2 - Year: 2015 - Height: 3800 mm - Arm Length: 6000 mm - Load Capacity: 500 kg Bystronic Suction Device - Model: EK 250 - Year: 2015 - Load Capacity: 250 kg - Weight: 80 kg - Pneumatically operated - 90° Tilting Nwedpfxjz Dphge Akion Disassembly and installation can be performed by our service team upon request. Immediately available.

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5921, overall weight: 12,000 kg, input current: 41 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, 5-axis CNC machining center 2 retractable tables, 1700x1425 mm each Linear axes X-4300, Y-2300, Z-1200 mm Rotary axes B +/- 120, C +/- 240 Tool magazines, 2 x 6 positions OSAI control system Bertronic remote control with teach-in functions 7.5 kW electrospindle, HSK-63F Nwedpfjz H Slmex Akisn 2 vacuum pumps, 100 m3/hour, two clamping zones (can be combined into one large zone) Exhaust hoods for chip removal around the tables in the work area RENISHAW TS27 probe for tool length measurement and rotary axis calibration Free-standing electrical control cabinet Complete enclosure of the machine to protect against dust and noise CE marking The machine is installed and connected – it can be tested.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 030-062962, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 6,000 mm, LiSEC ESL-6030RS-L – Automatic Glass Cutting Line Nwodpfx Akjz Ilrieion Complete automatic LiSEC line for precise and high-speed cutting of float, Low-E and laminated glass. Manufactured in 2013, the line consists of four interconnected components that together form a complete system for glass loading, transport, cutting and breaking. The cutting table is equipped with a magnetic drive and a Low-E coating removal head, allowing coating removal and glass cutting within the same process. Line Components: 1. Float and Low-E Glass Cutting Table - Model: LiSEC ESL-60/30RS-L - Serial number: 030-062962 - Year of manufacture: 2013 - Glass thickness: 2–19 mm - Cutting of straight and irregular shapes - Low-E coating removal system 2. Laminated Glass Cutting Table - Model: LiSEC VB-33 - Serial number: 040-014769 - Year of manufacture: 2013 - Designed for cutting laminated glass - Supported configurations: 33, 44, 55, 66 and 88 3. Glass Breaking Table - Model: LiSEC BTS-37/33 - Serial number: 054-054715 - Year of manufacture: 2013 - Weight: 1,525 kg - Maximum load: 55 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 10.89 kVA - Operating pressure: 8 bar - Protection rating: IP32 4. Tilting and Transport Table - Model: LiSEC ATH-60/30FD - Type: Double-Sided Moveable Glass Un/Loading Station - Serial number: 011-071248 - Year of manufacture: 2013 - Weight: 6,040 kg - Maximum load: 48 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 7.80 kVA - Operating pressure: 6 bar - Equipped with new mechanisms and vacuum suction cups for handling glass sheets Condition: - The complete production line is in good working condition and fully operational, - Documentation and additional technical information are available upon request, - A set of spare parts is included with the production line, along with an estimated value of the spare parts, - The production line will be available for collection from December 2026, - On-site inspection of the machinery is possible by prior arrangement. Note: - Glass racks for jumbo glass sheets are not included in the sale (we provide drawings for their construction) - The metal guideways in the floor for the Tilting and Transport Table are not included in the sale