Used other glass & ceramics processing machinery for sale (298)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 Ibelhccqszu Nvzsqoa - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Ibelhccqszu R Uleqea Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Year of construction: 2009, condition: ready for operation (used), A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Ibelhccqowihzusqoa

Year of construction: 2002, condition: ready for operation (used), A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible. Ibjlhccozi Eigeqqoa

Year of construction: 2017, condition: ready for operation (used), A Hegla SF 2518 vertical conveyor for the glass industry is available, weight: approx. 2700 kg. Ielhcotvgq Sjcqqsba

Year of construction: 2020, condition: ready for operation (used), Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available. Iolhsucw Tveccqqsba

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Iolhsw Duvhoccqqjba

Year of construction: 2017, condition: ready for operation (used), A rotating wall for the glass industry is available. Weight: approx. 1300kg. Iboljtvgrajhccqqja

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Iolhccsx Hff Sjqqjba

Year of construction: 2016, condition: ready for operation (used), A Lisec horizontal conveyor field is available. Pressure: 6bar, max. conveyor weight distribution: 50kg/m², weight: approx. 1450kg. Ibsljtvgq Ishccqqoa

Year of construction: 1997, condition: ready for operation (used), A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible. Ibslhezdum Reccqqsa

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Ibjlhccqsxg Rhpoqoa

Year of construction: 1998, condition: ready for operation (used), A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible. Ibjlhccjy Eg A Neqqsa

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Ijlet R Tq Ijhccqqoba

Year of construction: 2001, condition: ready for operation (used), A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment. Ibslhccqezgwyfsqsa

Year of construction: 2005, condition: ready for operation (used), Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible. Iolhjyrtamsccqqeba

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Ibjlhcsxcx A Tocqqoa

Year of construction: 2016, condition: ready for operation (used), Max. printing format: 1200x650mm, max. printing speed: 1000mm/s, connected load: 8kW, with documentation, has been regularly serviced by the manufacturer, on-site inspection is possible. Ibslhcoq N A Ncscqqsa

Year of construction: 2016, condition: ready for operation (used), Max. glass dimensions: 2000x3000mm, number of spindles: 8, glass thickness: 3-28mm, length: 6500mm, width: 1600mm, height: 2600mm, weight: 3.2t. Ijlhjin U I Uoccqqeba

Year of construction: 2023, condition: ready for operation (used), Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used. Ibolhccqenp I N Aoqja

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 160410, Open top washer for 3-12mm Washing height 1600mm Ibslhswnw Afsccqqja

Condition: used, • Technical Data: • Washing width – 2800 mm • Support height – 900+/-30 mm • Min. glass dimensions – 360 x 300 mm • Max. glass dimensions – 4800 x 2800 mm • Glass thickness – 2-19 mm • Transport speed – 2-13 m/min • Operator side – left Islhccsw Adn Reqqeba • Adjustable upper frame height extendable up to – 400 mm • Number of spray units – 2 pcs • Number of washing units – 2 pcs • Number of drying units – 5 pcs • Brush roller adjustment – pneumatic • Machine width – 3760 mm • Machine length – 3480 mm • Machine height/with blower platform – 1480 mm / 3900 mm • Price on request

Condition: good (used), - All rubber rollers new or as good as new Ibolhccqeulvlkeqsa - Belt length 3000 mm - Year of manufacture - Price On request

Condition: good (used), Year of construction: 2007, Single-stage reverse osmosis system. Islhccjzqtp Reqqjba Model: R0 04-1 with EWMK40 2xRVMR1ACM Width: 880 mm Height: 1450 mm Depth: 380 mm Control cabinet dimensions: Width: 500 mm Depth: 250 mm Height: 500 mm Total weight: 120 kg Condition: good, second-hand

Condition: good (used), Height: 1600 mm Width: 1200 mm Depth: 1100 mm Ibolszqf Edjhccqqja Weight: approx. 250 kg Condition: good, second-hand