Used eccentric presses single column over 100t for sale (131)

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Gjdoxq Rz Rspfx Aaysuk Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Year of construction: 1966, condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets pressure 1500 kN (150 tons) Gsdpfoir I Slox Aayouk stroke 60 mm ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Tech. Data and dimensions: Errors excepted.

Condition: good (used), Year of construction: 1983, Rotary indexing table with 12 stations Automatic ejector Three pressing stages pressure capacity 1.000 KN Gedpfxjlp Nqho Aayouk stroke 12-120 mm Stroke rate 30-60 1/min ram adjustment 80 mm total weight 9.500 kg

Condition: used, Year of construction: 1989, pressure 150 t throat 310 mm stroke 30-120 mm no. of strokes 20-60 Hub/min Gsdpfsxh Sw Uox Aayeuk ram - range of adjustment 90 mm table surface area 820x600 mm ram surface 550x430 mm hole in the table 330x200 mm table height 750 mm tool hole in ram Ø50 mm weight of the machine ca. 9,5 t dimensions of the machine ca. BxTxH 2500x2500x3000 mm

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm Guedpjddhw Sjfx Aayek clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 19,000 kg, pressing force: 160 t, type of input current: three-phase, power: 15 kW (20.39 HP), punching force: 160 t, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 235-335mm Table size: 2030x600mm Bear size: 1500x600mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Gusdeu D Ad Eepfx Aaysk Size: 2140x2210x3175mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with sheet feeder and straightener.

Condition: good (used), Year of construction: 1977, Offer 25021 Technical data approx.: Guedpfx Ajvmx N Eoayok - Pressure force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Hole in the table approx. 320 mm - Ram surface approx. 800 x 475 mm - Tenon hole in the ram mm - Ram adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. Gusdpfx Aasfim Thjyek good condition

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T105-TR Serial Number: 099603 Year of Manufacture: 1996 Nominal Force: 1050 kN Weight: 6,400 kg Nominal Strokes: 60 per minute Operating Air Pressure: 4.3÷5.5 BAR Installed Power: 7.5 kW Min./Max. Stroke: 15/140 mm Throat Depth: 310 mm Table/Ram Distance Min./Max.: 340/480 mm Ram Bore: 50 mm Ram Adjustment: 100 mm Air Consumption: 1.1 L Stop Position: TDC (Top Dead Centre) Voltage: 380 V Frequency: 50Hz Auxiliary Voltage: 24 V Hydraulic Overload Complete with instruction manual and CE conformity declaration Warranty: 6 months on mechanical parts and 12 months on the electrical panel. INSTALLED NEW COMPONENTS: • Safety keys for side safety guards; • Front guard with safety keys; Gedpfx Aexz A Hmjaysuk • Clutch plates; • Electrical control panel; • Worktable resurfaced on CNC machine; • Air regulators; • Air pressure gauges; • Safety solenoid valve;

Condition: used, Year of construction: 1983, pressure 100 t Gsdjxh Swhopfx Aaysuk throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: used, overall weight: 11,800 kg, pressing force: 130 t, Eccentric press with pneumatic clutch Brand: Pressix Model: 130CNR6 Serial No.: 130/0/34/96 Weight: 11,800 kg Pressing force: 130 tonnes Strokes per minute: 60 Gusdpfow N Sc Uox Aayek Max. number of single strokes: 15 Stroke length (Min./Max.): 11 / 160 mm Slide adjustment: 110 mm High TDC adjustment: 430 mm Max. ejector stroke: 60 mm Table: 700x1200x78(h) mm Slide base dimensions: 550x800 mm Coupling diameter: 60 mm Throat depth: 340 mm Max. die dimensions: 550x80 mm Max. die head weight: 365 kg Includes pneumatic feeder.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Gjdpju Dxb Tjfx Aayjuk Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Year of construction: 1983, condition: used, machine/vehicle number: 535350, Lg-Nr. 05466, - Compressive force 100 t - Throat 320 mm - Width in the column below the guide 400 mm - table size approx. 850 x 610 mm - drop-through hole in the table 335 / 300 mm - thickness of the table clamping plate 90 mm - overall installation height approx. 300 mm - surface of the chair 600 x 335 mm - height adjustment of the chair 80 mm - stroke adjustment 10 - 130 mm - ejector stroke in the chair 32 mm - Stroke rate continuous operation approx. 56 /min - Drive 380 V / 11 kW - space requirement approx. W 1900 x H 2800 x D 2200 mm - weight approx. 9000 kg - with : - UVV press safety control unit PREVENTA - Hydr. + pneumatically operated clutch - LUTEX additional brake system - central lubrication Gedpfx As E A Tmsayouk

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram Gedeu Rwa Iopfx Aayeuk - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: good (used), Year of construction: 1977, Pressure 160 t Guodpfx Asvi Ikqsaysk Ram adjustment 75 mm Strokes/min. 30-90 Stroke adjustment 20-130 mm Power requirement 15 KW Electrical system 380 V

Condition: used, Year of construction: 1970, functionality: unexamined, table width: 800 mm, table length: 1,000 mm, installation height: 480 mm, pressing force: 160 t, branded Schuler C-frame eccentric press Make: Schuler Type: PDr 160-400 Year of manufacture: 1970 Stock No.: 4023 Pressing force max.: 1600 KN Table size: 1000 x 800 mm ram dimensions: 710 x 450 mm Installation height max. 480 mm Stroke adjustment: 20-120 mm ram adjustment: 110 mm Stroke rate: 50 per min Motor power: 15 kW Machine weight approx. 9,800 kg Guodpfxju Tchgj Aayjk

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Frequency: 32 1/min Stroke: 30 - 140 mm Godpfsd A Hbcsx Aayjuk Ram adjustment: 105 mm Weight: app. 19.500kg Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram - Stand alone control panel - bearing of con rod overhault

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 150 t, compressed air connection: 6 bar, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AMADA Type: TP-150C-X2 Pressure: 150t Year of manufacture: 1986 Stroke length: 175mm Distance above table: (adjustable) 230-330mm Table size: 1250x750mm Bear size: 700x550mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Net weight: 16326kg Automatic greasing system. Gsdpfx Asu Dw U Sjayeuk Optionally with disc winder and straightener.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: Gujdonxh T Rspfx Aayek * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: good (used), Year of construction: 1977, functionality: fully functional, throat depth: 440 mm, ram adjustment: 110 mm, total height: 18,200 mm, table width: 800 mm, table length: 1,100 mm, total width: 24,000 mm, total length: 37,200 mm, overall weight: 12,600 kg, pressing force: 200 t, distance table to ram: 400 mm, power: 15 kW (20.39 HP), ram stroke: 40-180 mm Gusdotu Hvwspfx Aaysk incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: ready for operation (used), Machine has been rebuilt in 1981 and got control for hand working Power: 32 to Size of bolster: 700 x 650 mm Overhang: 340 mm Gujdsk S Efhspfx Aayjk Stroke: 16 - 63 mm Ram adjustment: 10 mm Other can be used for safe 2-Hand working euqipped by safety valve Herion Xsz 20 table can be moved in height Stand alone control panel machine and control assembled on solid steel plate

Condition: good (used), Year of construction: 2002, functionality: fully functional, table width: 610 mm, table length: 850 mm, installation height: 300 mm, total width: 19,000 mm, total length: 19,000 mm, overall weight: 8,500 kg, pressing force: 120 t, power: 12 kW (16.32 HP), to visit under power Gujdperwlxtofx Aayok

Condition: good (used), Year of construction: 2001, Table 950x650 mm, ram 610x410 mm, stroke 0-140 mm Gusdpfjqgcaasx Aayjk

Condition: good (used), Year of construction: 1977, functionality: fully functional, pressing force: 160 t, Weight approx. 11 t Godovi Igxspfx Aayeuk

Year of construction: 1965, condition: good (used), Table area 1,400 x 950 ram surface 1.000 x 600 ram adjustment 135 mm Godpfxepwgy Hs Aayeuk Stroke 60 - 200, stroke /min. 24