Used eccentric presses single column 55-99t for sale (122)

Condition: good (used), Year of construction: 2002, overall weight: 5,900 kg, pressing force: 63 t, Model: PREN-63 Year: 2002 Weight: 5900 Kg Nominal force: 63Tn Hjdpfx Ajuifr Hsayofr Type: Pneumatic clutch eccentric Normal stop position (PMS): 650mm Closing height (PMI): 350 mm Travel: 10-100 mm Motor: 5,5Kw 380V 50Hz Max. carriage adjustment: 65mm Air pressure: min. 3,5 max. 6 bars Total stopping time: 278ms Safety distance: 445 mm Maximum RPM at flywheel: 600

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Hodpfsv U Nm Dex Aaysfr Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum tool installation height: 355 mm Mold upper part weight: 250 kg MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: used, Year of construction: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in increments: 30–160 mm Ram adjustment: 180 mm Throat depth: 515 mm Stroke rate at idle: 45 / min Option: Infinitely variable stroke rate: 10–60 / min Die installation height at max stroke (ram down, adjustment up): 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin bore in ram: 65 mm Hedew Rbxzjpfx Aaysfr Main motor power: 45 kW Machine height approx.: 4,325 mm Machine weight: 33,000 kg Control - Press safety control with redundant structure and self-diagnosis, including status and error display in plain text Stepless stroke rate regulation in the range of 10–60 strokes/min via ABB frequency inverter Control variant – touchscreen TFT color including electronic cam control with tool management and tool protection, with color touchscreen visualization, SIEMENS PLC S7-300, tool data management, counting systems, data transmission via Profibus Fully automatic stroke/ram adjustment Rigidly welded tie rods, clear opening between tie rods: 1,345 mm Swiveling main control panel Non-contact safety device – BWS brand LUMIFLEX mounted at the front of the machine table and/or tool area, each mounted on the tie rods.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: A5137, Refurbished 100-ton HEILBRONN C-press, currently undergoing retrofitting - available at short notice. Hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc., new control system (adjustments still possible). Dimensions - see machine drawing as PDF. Technical specifications: Press force: 1,000 kN Speed: 50 rpm (variable speed optional) Variable stroke: 14 - 150 mm Ram adjustment: 80 mm Installation height: 420 mm (max. stroke at bottom, adjustment at top) Hfodpfx Ajwb A Dzeaysr Table: 650 x 500 mm Ram: 400 x 250 mm Thrust: 350 mm Drive power: 5.5 kW Approx. weight: 5,500 kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories Hedpfsfx Hv Hox Aayefr

Year of construction: 1971, condition: good (used), Pressing force: 63 t Table: 660 x 480 mm ram: 450 x 280 mm throat: 250 mm Hjdpsh N S Sdefx Aaysfr Ram stroke: 16 to 125 mm Sheet thickness continuous stroke: 3.2 mm max. distance table ram: 417 mm drop-through hole: 280 x 250 mm Adjustment ram downwards: 70 mm Stroke rate: 80 /min Connection: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1.500 x 1.600 x 2.700 mm

Condition: good (used), Year of construction: 1984, functionality: fully functional, pressing force: 63 t, Band saw LEN63C Hodpfx Aaeu Nkfuoyefr

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 54796/14A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Hedpfx Aasv I Uwusyofr Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum mold height: 355 mm Mold upper section weight: 250 kg Mold height at bottom of cylinder: 355 mm MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Höhe 3.600 Hfsdpfx Asiuxwqjayjr Breite 1.660 Tiefe 2.400 Gewicht 12.100 kg

Condition: used, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Hfsdpfxsv T Dapo Aayjr Stroke adjustment from 10-140 mm Ram adjustment 80 mm Stroke rate 50 /min.

Condition: used, Year of construction: 1979, pressure:64 t throat:315 mm stroke:8-100 mm Hodpfx Aascxxmfeysfr no. of strokes:140 Hub/min table surface area:820 x 630 mm table height over floor:800 mm ram stroke - adjustable min/max:8-100 mm ram - range of adjustment:63 mm total power requirement:7,5 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:1,45 x 1,70 x 3,10 m

Year of construction: 1993, condition: reconditioned (used), TECHNICAL FEATURES: Press Model: T80 FNAR Hodpfx Aask Rbykoyjfr Serial number: 8932 Year of construction: 1993 Nominal force: kN 800 Weight: Kg. 5.000 Nominal number of strokes: 60 min. Operating air pressure: BAR 5.5÷6 Installed power: 4 kW Max stroke: mm.100 Hammer adjustment: mm.60 Stop position: P.M.S Voltage: V 380 Frequency :50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Pedal board; • Two-hand command; • Safety valve; • Accident prevention guards with safety keys

Condition: ready for operation (used), Eccentric Press, Eccentric Press 63t, Aug. Ruhrmann E63 R, Used Machine Manufacturer: Aug. Ruhrmann Maschinenfabrik GmbH Type: E63 R Weight: 4300 kg Year: 1996 Overall dimensions: 1650 x 2500 x 3000 mm Stroke length: 8–100 mm Table size: 450 x 310 mm Electric power: 5 kW Air pressure requirement: 6–8 bar Hfjdpfsw Hrwuex Aaysr Stroke mode: Continuous / Single stroke operation Two-hand control Base plate is not included with the machine.

Condition: good (used), Year of construction: 1989, functionality: fully functional, total height: 25,500 mm, table width: 800 mm, table length: 630 mm, stroke adjustment: 105 mm, total width: 14,250 mm, total length: 17,900 mm, overall weight: 5,850 kg, pressing force: 63 t, height adjustment type: mechanical, power: 7.5 kW (10.20 HP), Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm Hsdpfotzxdzsx Aayefr - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: new, Year of construction: 2026, throat depth: 260 mm, table width: 520 mm, table length: 720 mm, stroke adjustment: 100 mm, pressing force: 60 t, stroke length: 100 mm, power: 4 kW (5.44 HP), warranty duration: 24 months, Equipment: safety light barrier,  Steel construction body,  Vibrational stress relief will be applied to the body and welded components.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Slide guided ram (8-point slide guidance)  Components such as ram, connecting rod, ram nose are made from cast steel, GS52  High-strength monoblock crankshaft – 4140  Equipped with spare bolster plate  Ratchet device for table-to-ram adjustment  Automatic central lubrication  Hydraulic overload protection  Pneumatic pedal with latching, and dual-hand control with timer  Electric counter  PLC application and touch screen – DELTA  Electrical switchgear – SIEMENS-SCHNEIDER  Dual-coil safety valve – GPA, TOPAIR  CE certification  Light curtain finger protection barriers – SICK, LEUZE, KEYENCE  Safety PLC (controls the entire electrical system, valve, dual-hand, and pedal) – PILZ Hfsdpfx Aoxrkr Ssayor  Position-locked limit switch and electrical panel  Safety support block  Protective guards in accordance with CE requirements TYPE: A TYPE MONOBLOCK FRAME Capacity: 60 tons Throat Depth: 260 mm Table to Ram Distance: 360 mm Slide to Table Distance: 395 mm Distance Between Side Frames: 440 mm Ram Adjustment: 70 mm Approx. Press Width: 800 mm Approx. Press Depth: 1450 mm Approx. Press Height: 2100 mm Front Anchor Dimensions: 680 mm Side Anchor Dimensions: 875 mm Table Hole Diameter: 150 mm Table Size: 520 / 720 mm Die Clamp Slot Diameter: 40 mm Ram Size: 340 / 220 mm Floor to Table Height: 730 mm Stroke Adjustment: Add. 95 mm Strokes per Minute: 55 spm Motor Power: 4 kW Motor Speed: 1450 rpm Approximate Weight: 3,500 kg

Condition: used, Year of construction: 1967, pressure:80 t throat:280 mm stroke:20-120 mm table width:710 mm table depth:560 mm ram head dimension:560x355 mm ram adjustment:72 mm no. of strokes:125 Hub/min Hfodpocxxrhefx Aaysr total power requirement:9,5 kW weight of the machine ca.:4,4 t

Condition: new, Year of construction: 2025, drop-through hole in table: 140 mm, table width: 590 mm, table length: 800 mm, stroke adjustment: 100 mm, pressing force: 60 t, ram bore: 40 mm, power: 5.5 kW (7.48 HP), punching force: 60 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD Hfedpfjvtx D Nsx Aayor • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 60 STROKE ADJUSTMENT RANGE (MM) 10-100 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 55 RAM - REGULATION RANGE (MM) 60 RAM - TABLE DISTANCE (MM) 400 LOWER TABLE DIMENSIONS (MM) 590X800 LOWER TABLE HOLE DIAMETER (MM) 140 RAM TABLE DIMENSIONS (MM) 275X450 RAM MOLD EYEBALL DIMENSIONS (MM) 40 MOTOR POWER (KW) 5.5 WEIGHT (KG) 3200 MACHINE DIMENSIONS (MM) (H - W - L ) 2300X1550X1300 • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED IF REQUESTED.

Condition: used, pressure:70 t throat:250 mm stroke:10 - 120 mm table-size:750 x 500 mm Hfjdpfjcxxttjx Aaysr dayligth:350 mm ram adjustment:350 x 200 mm no. of strokes:50 Hub/min daylight:310 x 370 mm total power requirement:5 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:1,3 x 1,4 x 2,5 m tilting eccentric press, tie-rod design with UVV movable protective screen, pneumatic clutch, quadruple led tappet, separate electric cabinet, central lubrication, electric two-hand operation, emergency cut-off

Condition: new, Year of construction: 2025, drop-through hole in table: 180 mm, table width: 660 mm, table length: 860 mm, stroke adjustment: 110 mm, pressing force: 80 t, power: 5.5 kW (7.48 HP), punching force: 80 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction body • Four-sided bearing guides • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Conforms to CE safety directives • Double coil safety valve • Manually adjustable stroke • Automatic adjustable stroke (for 150-300 tons) • Photoelectric safety curtain • PLC control system • Touchscreen LCD display (for 150-300 tons) • Two-hand pedal control system • Mechanical safety system • Hydraulic safety system (for 200-300 tons) • Emergency reverse motor motion • Complies with occupational safety regulations • Vibration dampening pads • Country of origin: Turkey • Warranty period: 24 months • We offer production of C-type eccentric presses from 5 up to 250 tons. Hedjvtx H Rjpfx Aayjfr TYPE: C-Type Monoblock Body Capacity: 80 Tons Throat Depth: 330 mm Distance Table to Slide: 425 mm Slide Adjustment: 70 mm Approx. Press Width: 1,400 mm Approx. Press Depth: 1,650 mm Approx. Press Height: 2,400 mm Table Hole Diameter: 180 mm Table Size: 860 x 660 mm Die Fastening Slot Diameter: 40 mm Slide (Ram) Size: 480 x 300 mm Table Height From Floor: 800 mm Stroke Adjustment: 10-110 mm Strokes per Minute: 50 spm Motor Power: 7.5 kW Motor Speed: 1,500 rpm Approx. Weight: 3,700 kg • As the manufacturer, we can modify the technical specifications upon request.

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW Hfjdscxxx Hspfx Aayor weight of the machine ca.:3,5 t

Condition: new, Year of construction: 2025, table height: 850 mm, pressing force: 80 t, table width: 600 mm, table length: 800 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Hjdjvxhb Ujpfx Aayjfr Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: new, Year of construction: 2025, throat depth: 280 mm, ram adjustment: 85 mm, table height: 755 mm, drop-through hole in table: 190 mm, table width: 540 mm, table length: 740 mm, stroke adjustment: 100 mm, pressing force: 80 t, ram bore: 40 mm, power: 7.5 kW (10.20 HP), punching force: 80 t, Equipment: safety light barrier, A TYPE ECCENTRIC PRESSES GENERAL FEATURES  Steel construction body,  Stress relief will be applied to the body and welded parts with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 8 slides  Parts such as ram, connecting rod, claw are cast steel, GS52  High strength solid crankshaft – 4140  Inside of connecting rod will be bronze, (Zr14)  With spare table,  With hydraulic fuse  Ratchet apparatus table-ram adjustment  Automatic central lubrication,  Pneumatic pedal with ratchet and double hand control with time adjustment,  With electric counter,  PLC application and touch screen – DELTA  Electrical switchgear materials – SIEMENS-SCHNEIDER  Double coil safety valve – GPA, TOPAIR  Locked position switch and panel,  OPTIONAL FEATURES  CE application  Finger protection beam barriers – SICK, LEUZE, KEYENCE  Security PLC (Controls the entire electrical system, valve, double and pedal) – PILZ  Safety wedge,  Protective enclosures will be within the scope of CE.  Speed Control Application  Automatic Lubrication System BODY A TYPE MONOBLOCK BODY TYPE A SERIES Capacity 80 Tons Throat Depth 280 Mm Table-Ram Distance 400 Mm Slide-Table Distance 420 Mm Wall Distance 470 Mm Ram Adjustment 85 Mm Press Width 1000 Mm Press Depth 1735 Mm Press Height 2300 Mm Front Anchor Dimension 720 Mm Side Anchor Dimension 1040 Mm Table Hole Diameter 190 Mm Hfsdpsvxtgiefx Aayer Table Size 540 / 740 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 370 / 230 Mm Floor Table Dimensions 755 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/Min. Motor Power 7.5 KW Motor Speed 1450 RPM Weight 4,500 Kg ROLL UNCOUNTER AND ROLL DRIVER WILL BE PRICED EXTRA IF REQUESTED. IT IS NOT INCLUDED IN THE PRICE OF THE PRESS.