Year of construction: 2020, Condition: refurbished (used), Painting cube on rollers Ready to plug in 230 V Motor power: 1,1 kW volume flow: 2.500 m³/h Dimensions: 1200 x 1200 mm W X H Hose connection rear bottom side: 250 mm Double filtration system paper filter and Paintstop filter mat Spray booth Paint mist Dry spray wall Spray wall Paint wall Cgjbefuhu Aj Et D Stjt

Condition: new, Alko clean air dust extractor POWER UNIT 200 P Motor power 3.0 kW 3 Ph, 400 V, NW 200 mm, nominal volume flow 2262 m³/h according to GS-HO-07, max. volume flow 3010 m³/h Cobjq T Nb Ao Et D Stegt Compressed air cleaning, pre-separator, 2 filling containers 165 L each (net) with jet cleaning with dust bulkhead

Condition: good (used), Year of construction: 2001, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: VEM 3,6 kW 1430 U/min Ex protected -Fan wheel: Ø 580 x 180 mm -Connection: inlet Ø 395 mm Cgsb Etsvnaabe D Stet -Connection: Output 280 x 485 mm -Dimensions: 825/670/H825 mm -Weight: 118 kg

Condition: used, Year of construction: 2023, used Brand AL-KO Type Power Unit 120 / 400 V Year of manufacture 2023 Clean air device / negative pressure for chips GS dust-tested CE type-tested Motor 1.5 kW Connection diameter 120 mm Pressure pa. 2180 Air output 814 m³/h nominal volume Pressure display Csbjv Hhttj Et D Stegt Space requirement approx. 650 mm x 1200 mm x 2000 mm (height) Weight approx. 150 kg Total connected load 1.5 kW Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: excellent (used), Functionality: fully functional, Specification: • condition - used • turbine engine power - 1.5 kW • turbine inlet - fi 150 mm • reduction to 2 x 110 mm • collection bag diameter - 1 x fi 500 mm • 1 filter bag with dimensions - 500 x 1200 mm (2.2 m2) • efficiency approx. 3,000 m3/h • dimensions 110 x 65 x 260 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site Cgob Et Dewc Tqbo Stet

Condition: ready for operation (used), machine/vehicle number: 80290, Extraction capacity: 5500 m³ / h Negative pressure: 765 - 351 Pa Suction opening: 180 x 220 mm Outlet opening: 300 mm Ø Speed: 1400 rpm Drive motor: 380 V, 5.3 kW Weight: 60 kg Required space: 720 x 680 x 350 mm Cgsb Eteft Siuj D Stst

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm Cob Etjfn Ndcj D Stogt depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: good (used), Year of construction: 2007, inlet: 250 mm, Dust extraction,sawdust extraction,self-cleaning vacuum pneumatic filter Alko Mobil JET 250 Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Ideally suited for wide-belt grinders and all kinds of dry dust in various technological processes. 6.5 Kw fan Capacity 4900 m3/h Vacuum 2740 Pa Spigot diameter 250 mm Air return Cgeb Et Dsqwyafs Stet Technical documentation included

Condition: good (used), Year of construction: 2002, Underframe with funnel and chain conveyor for material discharge Filter area designed as an inlet or filter chamber with externally loaded filter hoses stabilized by support baskets, pressure relief device in accordance with VDI 3673 Clean air area with purge air fan mounted on trolley, access to the clean air area through maintenance door via ladder with platform and back protection according to UVW Circuit to control the cleaning (depending on the differential pressure) and the material discharge First commissioning in 2002 including rotary valve type V7 (pressure-tight) 1 "dry" fire extinguishing system 1 transport fan (clean gas) 4 vibration dampers 2 Flexible connections 1 circular flow line to feed two on-site containers Cgjbehbv A As Et D Stet 2 toggle switches 3 galvanized electric shut-off valves for shutting off the ring running pipe u tue fresh air intake when loading the silo 1 return air duct with 180 degree deflection and simultaneous pressure relief 1 splitter silencer 1 electric switch cabinet ES up to 140 KW 1 complete level indicator for chip bunker 1 pressure measuring device for suction 1 frequency converter type Danfoss VLT 6000 for transport system Filter system Filter area 522 m² - filter hoses 152 pieces (renewed approx. 1.5 years ago) - 1. Extraction fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 2nd exhaust fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 3rd chip transport fan (to the silo) D = 315 mm, motor 18.5 KW, volume flow 6,200 m³ / h. / 2935 rpm. at 50 Hz - Intake socket D = 570 mm / D = 450 mm / D = 350 mm - Chain discharge 0.55 KW - Cleaning with a purge air fan 5.5 KW - Control cabinet with control and 3x Danfoss frequency converters Filter dimensions approx. Width = 2400 mm x length = 7500 mm x height = 9750 mm (discharge 2550 mm + 2400 + 2400 + 2400 mm = 9750 mm) Dimensions fan return air housing (2x) approx. Width = 1700 mm x length = 2000 mm x height = 4900 mm Total length of the system (filter + 2x fan return air housing) approx. 18.5 m New price of the system over € 200,000,-- More photos on our website

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, Functionality: fully functional, type of input current: three-phase, nominal power: 4 kW (5.44 HP), power: 4 kW (5.44 HP), ZFR EV AP 560 K4 Power 4 kW Three-phase electric motor Air flow up to 2700 m3/h Vacuum up to 200 mmH2O Suction connection 200 mm Waste capacity 100 liters Cjbjwcfl Re Et D Stjgt Main filter area 50000 cm2 Main filter class M antistatic Filter cleaning manual with lever Dimensions 78x85x214 cm Weight 130 kg

Condition: new, Code: N0022 Brand: ARIATECH Model: ATB 2 - CE Standard Professional wheeled dust collector with 2 filter bags for dust and chips from carpentries, machine shops and various - CE Standard Structure in sturdy galvanized sheet metal Wheeled base to be able to be moved around the workshop and be connected to more machines Ceb Eou S N T Hjt D Stsgt Can be mounted indifferently either with the suction mouth facing upward or downward Motor Hp 4 ( Kw 3) Diameter of nylon bags mm 500 Diameter of plastic collection bags mm 500 Overall dimensions of assembled machine mm 1700 x 600 x 2500 h Overall dimensions of disassembled and packed machine mm 1750 x 800 x 800 h Weight kg 130

Condition: ready for operation (used), Extraction capacity: 320 m³ / h Pa max .: 47 mmWS Suction opening: 200 x 450 mm Cgsb Eteft Sdhj D Stet Outlet opening: 275 mm Ø Speed: 1400 rpm Drive motor: 380 V, 0.5 kW Weight: 30 kg Space requirement: 500 x 320 x 520 mm

Year of construction: 2020, Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Csbofn Ndde Et D Stsgt Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 1999, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 8003750 B, Holtrop & jansma rotary valve Type: ZRS 400 - Refurbished rotary valve holtrop jansma - internal dimensions: 400mm x 320mm - New rubber flaps - New bearings - Nord motor + reducer fully tested & functional, ready for immediate use. Cob Ejvttmljt D Stogt

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm Csbofydzbj Et D Stogt • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: like new (used), Year of construction: 2021, type of input current: three-phase, filter area: 798 m², negative pressure: 4,300 Pa, overall weight: 21,000 kg, suction capacity: 105,000 m³/h, Central dust removal system, sawdust extractor, dust extraction, self-cleaning, vacuum filter by NESTRO. The filter is pneumatically cleaned with compressed air pulses during operation, which ensures high efficiency of the device. For all types of dry dust in various technological processes. The device is like new - never used. Nestro JET 11557 self-cleaning bag filter Year of production - 2021 Filtration area - 798 m2 built-in 5 pcs. of fans with a power of 30 kW each Device efficiency - 105,000 m3/h Max vacuum - 4300 Pa Auger + ATEX rotary lock EX explosion-proof flaps Weight - 21,000 kg The system meets ATEX requirements. The device is already dismantled for transport. Technical documentation available. Ceb Eov E Hxlet D Stogt

Condition: reconditioned (used), Year of construction: 1995, Functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Cgeb Et D Ssv Azfzstet

Condition: ready for operation (used), machine/vehicle number: 838 621, minimum pressure: 180 mbar at suction capacity: 2,2 m³/min outlet nozzle-Ø: 50 mm Cgeb Et Dedzw I No Stst rotational speed: 2780 rpm drive motor: 220/380 V, 0,95 kW space requirement: 510 x 350 x 480 mm

Condition: good (used), Year of construction: 1999, Dust suction hood 300 mm Motor output 7,5 kW Cgjb Etot T Eaao D Stjt Air consumption 6100 m³/h Dimensions (L/W/H) mm Weight kg m³/h mm

Condition: good (used), mobile extraction Cgeb Esvmfbhet D Stjt 2.2kW; 380 volts With new top filter 2 intake nozzles 180mmØ or 150mmØ Switchable

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Cgobofzbqys Et D Stjt Weight net 1,040 kg

Condition: like new (used), Year of construction: 2021, type of input current: three-phase, filter area: 1,848 m², negative pressure: 4,300 Pa, overall weight: 16,000 kg, suction capacity: 63,000 m³/h, Central dust removal system, extractor, dust extraction, self-cleaning, vacuum filter by NESTRO. Filters cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. For all types of dry dust in various types of technological processes. The device is like new - never used. Self-cleaning cartridge filter JET 11520 year of production - 2021 Cgeb Etjv E Hmis D Stst Filtration area - 1848 m2 built-in 3 fans of 30 kW each Device efficiency - 63,000 m3 / h Max vacuum - 4300 Pa Auger + ATEX rotary lock EX explosion-proof flaps Weight - 16000 kg The system meets ATEX requirements. The device is already dismantled for transport. Technical documentation available.

Condition: reconditioned (used), Rated motor power 2.2kW/5.2A Rated voltage 380V / 50Hz / ~3Ph Ceb Eev Azcyst D Stsgt Rated volume flow 1350 m³/h Rated negative pressure 2850 PA Main switch + start and stop Manual filter cleaning Suction nozzle 140 mm 1 container diameter 800 mm

Condition: used, Year of construction: 2009, Dimensions (L/W/H) mm Filter capacity 14 m² Number of filters St. Dimensions (L/W/H) mm engine output 5,5 kW Cjbou Sbkao Et D Stjgt 0 2.800 m³/h low pressure 5.000 Pa suitable for dust removal from graphite and metals electromotive filter cleaning including mechanical filter unit ME-FI 2000 Manufacturer W+W Filtersysteme The suction fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.

Condition: like new (used), Year of construction: 2021, filter area: 1,568 m², suction capacity: 42,000 m³/h, Central dust removal system, extractor, dust extraction, self-cleaning, vacuum filter by NESTRO. Filters cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. For all types of dry dust in various types of technological processes. The device is like new - never used. Self-cleaning cartridge filter JET 11520 year of production - 2021 Cgob Ejv Ewmgst D Stst Filtration area - 1568 m2 built-in 2 fans of 30 kW each Device efficiency - 42,000 m3/h Max vacuum - 4300 Pa Auger + ATEX rotary lock EX explosion-proof flaps Weight - 12,500 kg The system meets ATEX requirements. The device is already dismantled for transport. Technical documentation available.