Double mitre saw in perfect condition

SCHÜCO PDG E-Cut 500 PDG E-cut 500

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Pgjdowqdbmepfx Akiju

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Pgedpfxjw Naane Akiju MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Pgodpfevtzzkjx Akiou Electrical power: 0.75kW Voltage: 220V 50Hz

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Podpfx Akeuiy Ngjiogu Online support connection Delivery and installation on your premises Training of your employees

Year of construction: 1985, condition: good (used), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Smallest cutting length at 90° + 45°: 335 mm - Cutting range, see diagram attached - Swiveling range inwards, manual: 90 - 22.5° - Tilting range inwards, manual: 90 - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per working cycle, approx.: 64 l - Space requirement, approx.: W 4500 x H 1950 x D 1600 mm Pgjdjimdlrepfx Akieu - Weight, approx.: 1400 kg - Including: - Cutting length adjustment with positioning control - Positioning control renewed around 2002 by WOLFF GmbH - Saw head swiveling and tilting for high and wide profiles, - as well as miter cuts

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" - Digital grit adjustment - Vacuum table incl. blower in the machine frame Pgedozuzcmepfx Akieu - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2007, overall weight: 1,550 kg, cutting speed: 2,800,000 mm/min, Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details. • Blade diameter: 450 mm • Blade bore: 32 mm Pgedpfeyhfm Djx Akieu • Cutting capability: double miter (left and right) • Build: heavy-duty, solid construction for high stability and precise results • Condition (as stated by owner): low operating hours; regularly serviced; maintained in excellent condition • Application: suitable for workshops, assembly lines, and heavy-duty industrial environments

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Pjdpjxz Hh Ujfx Akisgu Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH MOBICOM 45 mobile concrete mixing plant is an innovative production solution that combines high performance with a compact design. With its structure requiring minimal preparation time and low installation costs on construction sites, it is an excellent choice for projects that frequently change locations. All equipment is designed to fit into a single 40 ft container, eliminating the need for extra permits or special equipment for road transport. Quick setup is possible without the need for a mobile crane, and the plant can be easily transported to different construction sites with the help of a truck. The mixer's position close to ground level allows the produced concrete to be transferred directly to the transit mixer via a conveyor belt. MOBICOM 45 can be equipped with pan, single-shaft, or planetary mixer options according to user needs. The low feed height of the aggregate bunker allows the bucket to fill directly without a ramp. The advanced automation system is supported by SIEMENS and SCHNEIDER branded electronic components, and the entire production process is precisely controlled by advanced PLC-based software. It can be used with a cement silo or a bagged cement system, ensuring full compatibility with different production scenarios. Mobicom 45 – Mobile Concrete Batching Plant Technical Specifications Production Capacity: 45 m³/h Transport Position Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 9.5 tons Total Motor Power: 55 kW Pedpfxsxqgzgj Akijgu Required Electric Generator: 80 kVA Mixer Options: Pan – Single Shaft – Planetary Required Operating Area: 200 m² Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 1 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.75 m³ Cement Weighing Bunker: 450 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo: Options ranging from 50 to 200 tons Control Type: Fully Automatic Why Should You Choose the Mobicom 45 Mobile Concrete Batch Plant? At CONSTMACH, we prioritize quality, speed, and reliability in concrete production. MOBICOM 45 can be set up quickly on your construction site thanks to its compact design and reduces your production costs with its high efficiency. Its dimensions, which comply with international transportation standards, allow for easy transport between projects. It guarantees maximum performance with its long-lasting material quality, automation technology, and low maintenance requirements. With the CONSTMACH guarantee, you gain not just a machine, but a professional solution that increases continuity and profitability in production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 2024, condition: new, Trolley for carriage of sashes and frame COMALL CARR 600 - 85/9 Q, new Technical specifications: - 9 compartments with working size 84 mm - Contact surfaces coated with non-scratch and shock-proof plastic material - Rollers for sash carriage - 4 wheels Ø 125 mm, 2 of them with locking device - Support: 560 Kg - Carton packing Pjdpfx Aslfargskisgu