Used die cutter for sale (88)

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine Dcodpfey E Expex Am Reh This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC Dedpjy E Exijfx Am Rsch – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) Dcedpfxeyz Adnj Am Rsh C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Dcjdpfx Amoy Ehmcs Rsh Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. Dcjdpfx Amswabbvo Rsh The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Condition: used, Meyer Press Type AHV-CPL 8050 Dcedsbq A A Nopfx Am Reh Machine number: 697102

Year of construction: 1991, condition: used, Standard equipment Dcjdjbnggzjpfx Am Reh

Condition: ready for operation (used), WITY ML DIE CUTTING AND CREASING SIZE 1100 Dedpfxszaviae Am Rsch

Condition: ready for operation (used), Hot Foil system SM SYSTEM -France 6 heating zones Honeycomb 2 pcs Dcodpfx Aoyx Icdom Rsh Size 57x77 cm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, Erba Titan 6PN cutting machine Year of manufacture: 2000 Technical specifications: • Maximum sheet size: 1210 x 1700 mm • Pneumatic clutch and brake • Hard cutting plate • Die mounting: screwed to the machine body • Three machine operating modes • Central lubrication pump Djdpfx Aoxb A Nhom Rsch • Laser safety system Machine in good technical condition, fully functional and ready for use. Ideal for companies with medium to high production volumes. EXW PRICE POLAND: EUR 37,500

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Dcodpsy Ah Ibjfx Am Roh Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: new, Bobst chains gripper bar 142 CER new Available: 2 sets Djdpfx Amofl Sfys Rsch

Condition: good (used), machine/vehicle number: 2004, Renz HB 2000 Binding machine for plastic effect binding; Spiral; Wire O Dsdpfjbq Sykex Am Roch

Year of construction: 2020, condition: excellent (used), This machine is available for the German market only. Dcedpfxsg U Amzo Am Roh

Condition: ready for operation (used), functionality: fully functional, Graphic Whizard numbering, perforating and creasing machine with many accessories. Immediately available Djdpfx Aovcxwnem Roch

Year of construction: 2022, condition: as good as new (ex-display), Large format cutting plotter DG1513 Cutting format 150 x 130 cm synchronized vacuum belt system Unwinder for large format roll goods Tangential knife Oscillating knife Creasing tool Dcodpfxjnfvwvo Am Rsh Incl. vacuum generator Control console control, incl. software

Condition: good (used), Punching crucible Simplacutter, 72 x 102 cm, in a good condition, immediately available Dcjdpfeiypwaex Am Rjh If you are interested, we will be glad to inform you about other machines in our house. You are welcome to visit the machine in our house after previous appointment.

Condition: good (used), machine/vehicle number: 169693, Heidelberg embossing platen TP, machine number T169693 + Heidelberg embossing platen TP, T191298, machine is in good condition, available immediately. If you are interested, we would be happy to inform you about other machines in our facility. Dcodpovvikfjfx Am Rjh You are welcome to view the machine in our facility by appointment.

Year of construction: 2004, condition: good (used), register die cutter EUROTRON IND-XR 500, year 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result photo of test, in a good condition, immediately available If you are interested, we will be glad to inform you about other machines in our company. Dedoh H Iu Tspfx Am Rsch You are welcome to visit the machine in our house by appointment.

Year of construction: 1989, condition: good (used), machine/vehicle number: 11848, Punching platen Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, available immediately We have two more Gietz models. Please ask for an offer. Dcsdjrbhd Tspfx Am Roh If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment.

Condition: good (used), Year of construction: 1992, The James Burn BB32/37 is a semi-automatic wire binding machine with a working width of 320 mm and closes wires of all diameters from 1/4 inch to 1 inch in both 2:1 and 3:1 pitch. With the BB32/37 you can bind up to 1,800 books per hour. The machine is equipped with closing tools for all diameters. Compressed air is required for operation. Dcsdpfx Ajxdfb Sjm Roh

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Non Stop Feeder & Delivery Center Line System: for Quick Job Changeover Working Hours: 1500h Dcsdpfx Aowr T Aiem Roh

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Djdpfxsxzvame Am Rsch Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: good (used), Year of construction: 1997, punching force: 350 t, overall weight: 4,500 kg, input voltage: 380 V, input frequency: 50 Hz, Die cutting press TMZ Type L122, year 1997, format 93x126 cm, punching force 350 tons, speed 1400 cycles/hour, quick-clamping frame, safety foot mats, in good condition, immediately available. Dsdpfxsx Dilhs Am Roch

Condition: good (used), functionality: fully functional, Kerma Manual Die-Cutting Platen Year of manufacture: 1979 Weight: approx. 2.5 t Inner frame width: 485 mm (height) x 640 mm (width) Cutting area: 520 mm (height) x 660 mm (width) No TÜV (safety certification) Processable materials: Corrugated board, B and C flute Solid board up to 2 mm (cutting and creasing) up to approx. 1000 g/m² For TÜV certification, safety switching mats must be retrofitted. A lot of accessories (at least 10 die frames) Terms of delivery: Self-collection from location in Germany, not dismantled, not packaged Price: negotiable Djdpfx Aot S Rlfsm Roch