Used horizontal band saws - automatic - cutting range from 400mm for sale (92)

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,920 kg, controller model: Siemens Simatic HMI, cutting diameter: 320 mm, cutting speed: 130,000 mm/min, saw band length: 6,300 mm, The machine was overhauled by Kasto in 2016! TECHNICAL DETAILS Cutting diameter: 320 mm Saw band length: 6,300 mm Cutting range: 420 x 320 mm Cutting speed: 20 – 130 m/min Material support height: 950 mm MACHINE DETAILS Control: Siemens Simatic HMI Total power requirement: 15 kW Dimensions & Weight Space requirement: approx. 6.35 x 6.76 x 2.41 m Machine weight: approx. 2,920 kg Isdpfxsywhdfe Akpsbb Pneumatic connection: 6 bar Coolant: 75 l Pump capacity: 40 l/min EQUIPMENT Infinitely variable feed rate Roller conveyor Chip conveyor Technical documentation The machine is supplied without robot and loading system. The machine must be reprogrammed by the customer for stand-alone operation.

Condition: good (used), Year of construction: 2001, power: 12 kW (16.32 HP), total height: 3,270 mm, total length: 4,000 mm, total width: 2,250 mm, overall weight: 4,400 kg, Capacity 90°: 530 x 530° Min. cutting length:40mm Isdpfou U Narjx Akpjbb Max. sawing: 17 - 110 Power: 12kW Chip conveyor: Yes Length: 4000mm Width: 2250mm Height: 3270mm Weight: 4400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, Schnittbereich rund: 560 mm Cutting area, square (W x H): 560 x 560 mm Smallest size that can be cut: 100 x 100 mm Clamping range: 100 - 560 mm Bundle cutting range (min. W x H - max. W x H): - mm Shortest length of cut piece : 50 mm Shortest remaining piece length in automatic mode*: 170 mm Shortest remaining piece length in single cut: 40 mm Length: 2300 mm Width including chip conveyor: 5200 mm Height: 600 mm Weight of machine approx.: 11000 kg Electrical connected load: 26 kW Saw motor power: 15 kW Hydraulic motor power: 3,75 kW Cutting speed continuously adjustable: 20 - 80 m / min Feed speed of the saw: 1 - 300 mm / min Automatic material feed length, single stroke: 500 mm Length of automatic material feed, multiple strokes: 9999 mm Dimensions of the saw blade: 8400 x 67 x 1,6 mm Iedsxu Ay Hjpfx Akpsbb Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyLED work lightSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade

Condition: new, Year of construction: 2025, Schnittbereich rund: 660 mm Schnittbereich quadratisch (B x H): 700x660 mm kleinste zu schneidende Größe: 30 x 30 mm Einspannbereich: 20 - 700 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 30 x 30 - 700 x 660 mm Kürzeste Länge des abgeschnittenen Stücks : 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 20 mm Length: 3150 mm Breite inkl. Späneförderer : 4300 mm Height: 3080 mm Höhe der Materialauflage: 895 mm Iedpjxrutyefx Akpjbb Weight of machine approx.: 6400 kg Electrical connected load: 17,8 kW Leistung des Sägemotors: 11 kW Leistung hydraulischer Motor: 2,2 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 90 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 1000 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 8100 x 64 x 1,6mm mm

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning Isdefg E Hvspfx Akpjbb • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: used, Year of construction: 1994, cutting diameter 520 mm Ibedpfx Ajwm Rm Ijkpsb saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting length (max.): 760 mm, cutting range round steel at 90°: 400 mm, saw band length: 5,920 mm, working height: 720 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: infinitely adjustable (1:7) Working range (round): max. 400 mm Iodpfx Aksy Ex E Nopebb Working range (square): 400 x 370 mm Cut length (single stroke): 10 - 760 mm Cut length (multiple stroke): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Min. finished part length: 10 mm (35 mm vertical) Note: Disassembly and loading can be offered by the seller at an additional cost. The roller conveyor is not included in the offer.

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 50900 € 962.01 € Doppelsäulenführung 5750 x 41 x 1,3 mm 20 - 120 m/min 420 mm 420 mm 420 x 420 mm 805 mm 1.1 kW 5.5 kW 1 kW 0.12 kW 2860 mm 1980 mm 2100 mm 3700 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Iodpfx Akswiq Dfopsbb Chip conveyor Operating instructions in GERMAN or ENGLISH

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min Ibsdetqqrfspfx Akpeb dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong Iedpfxot Eacgj Akpjbb reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Ijdoqrqvhspfx Akpobb Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Isdpfxjfg E Hnj Akpjbb Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry Isdsfu Nbbopfx Akpjbb

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t Iodpjfgyifjfx Akpobb dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H Ibodpfjfgyigox Akpeb standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled Ibedpfx Ajfg E Hmskpsb • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, Year of construction: 2025, Schnittbereich rund: 430 mm Schnittbereich quadratisch (B x H): 430 x 430 mm kleinste zu schneidende Größe: 30 x 30 mm Einspannbereich: 30 - 430 mm Bündelschnittbereich (Min.B x H - Max. B x H ): - mm Ibedpfx Aswqca Iekpeb Kürzeste Länge des abgeschnittenen Stücks : 25 mm Kürzeste Reststücklänge im automatischen Betrieb*: 170 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Length: 2500 mm Breite inkl. Späneförderer : 3900 mm Height: 2500 mm Weight of machine approx.: 6400 kg Electrical connected load: 17 kW Leistung des Sägemotors: 11 kW Leistung hydraulischer Motor: 2,2 kW Schnittgeschwindigkeit stufenlos regelbar: 30 - 150 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 6100 x 54 x 1,6 mm Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyLED work lightSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade