Used horizontal band saws - automatic - cutting range 300-359mm for sale (89)

Condition: good (used), Year of construction: 1998, Used semi-automatic bandsaw from IMET Bedjz Iahljpfx Ap Ieww Type BS 350 SHI-E Capacity 350 x 270 mm

Condition: excellent (used), Year of construction: 2003, Kasto Kastotec AC3 full automatic sawing machine Year: 2003 Technical details: Max cutting diameter 90° 330 mm Max Cutting flat 90° 430 x 330 mm Cutting speed Vario 12 - 120 m/min Blade size 6830 x 41 x 1,3 mm Blade motor power 5.5 kW Dimensions 4245x2140x2310 mm( including the swarf conveyor ) Max workipece weight 2275 kg Machine weight 3300 kg Operationg hours: 15724 Bwjdpfxozxdd Is Ap Iow Saw on hours: 12839 Under power in our warehouse, ready to use. Video available upon request!

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication Bwjdpfx Aszdu Uzjp Ijw - Micro-dosing device - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions

Condition: used, cutting diameter / mm saw band length / mm cutting width / mm Manufacturer: KASTO Type: SSB 260 VA Machine type: Fully automatic band saw Design: Hydraulic, automatic feed Cutting range (round): approx. 10–260 mm Bwjdpozu Daujfx Ap Isw Cutting range (square): approx. 260 × 260 mm Minimum cut length: approx. 5 mm Automatic feed: approx. 600 mm Multiple feed: up to approx. 5,400 mm (depending on version) Cutting speed: approx. 15–125 m/min, infinitely variable Saw band length: approx. 4,115 mm Saw band width: approx. 38–41 mm (depending on version) Saw band thickness: approx. 1.0–1.3 mm Saw motor: approx. 4.0 kW Total connected load: approx. 6.5 kW Machine weight: approx. 2,000–2,200 kg Dimensions: approx. 2,160 × 2,080 × 2,015 mm (depending on version) SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: new, functionality: fully functional, COSEN G320+ Full Cover – High-Performance Bandsaw Machine | Available Immediately Fully automatic sawing for precise cuts and economical series production. The COSEN G320+ Full Cover combines modern NC control, high cutting accuracy, and extensive automation functions – ideal for industry, metalworking, and series production. Technical Data Cutting range: Ø 325 mm or 380 × 325 mm Saw band: 4242 × 34 × 1.1 mm Saw drive: 3.75 kW Weight: 2,200 kg Working height: approx. 820 mm Connection: 400 V / 50 Hz Bwodpfx Apezw E Tus Iew Equipment & Automation Smart NC control with 5.7" HMI touch screen, up to 100 cutting programs Mitsubishi PLC control V-Drive frequency control, cutting speed continuously adjustable from 15–100 m/min Digital display for saw feed, chip removal rate & saw frame position Material database for automatic parameter selection depending on the material Infeed automation with freely programmable head cutting length LED traffic light for machine status display & LED work light Hydraulic chip conveyor (adjustable) & coolant system with cleaning nozzle Hydraulic band tension with band breakage monitoring Vibration-damping roller for a smooth cutting action Automatic band guide arm positioning Material retraction after cutting to protect the saw band Slow-motion function for manual material positioning Infeed-side material support approx. 1,500 mm Outfeed table with coolant return approx. 500 mm AVAILABLE IMMEDIATELY – READY FOR DEMONSTRATION The machine is connected and powered up in our showroom and ready for demonstration. See for yourself the cutting quality, ease of operation, and automation in a live demonstration. Would you like to use the machine directly in your production? If desired, we will organize the professional loading and safe transport directly to your location. Inspection, consultation, and live demonstration by appointment. Inquire now – we will be happy to prepare an individual offer for you.

Condition: excellent (used), Year of construction: 2008, input voltage: 380 V, cutting height (max.): 330 mm, cutting width (max.): 370 mm, total height: 34 mm, overall weight: 2,500 kg, cutting range round steel at 90°: 330 mm, cutting range square steel at 90°: 330 mm, saw band length: 4,430 mm, saw band width: 1 mm, For sale: a professional, fully automatic band saw for metal, manufactured by the renowned Taiwanese brand Bigstone, model CF 325 (year of manufacture 2008). Its robust construction ensures high rigidity and performance, with technology comparable to top-of-the-line models from AMADA, BOMAR, and PILOUS. Here is a short video demonstrating the machine in operation: ?is=nlNDZ9sSgcR8z4iA The machine weighs a substantial 2500 kg, guaranteeing complete vibration-free operation during cutting and ensuring perfect geometry and consistent serial production. Technical condition: The machine is in 100% working order, connected in the workshop, and ready for immediate production use. The hydraulic feed system, vise clamp, and automatic cycle function flawlessly. Technical specifications: Bedpfxoxyuwne Ap Isww • Maximum cutting range (square): 330 mm • Maximum cutting range (rectangle): 330 x 370 mm • Cutting blade size: 4430 x 34 x 1.1 mm (wide, stable blade) • Main motor power: 5 kW (very powerful drive) • Weight: approx. 2500 kg Equipment and logistics: • Advanced automatic control: The controller allows for full programming of the desired number of pieces to be cut. • Multiple feed function: The machine has a function for repeating the feed stroke up to nine (9) times for a single piece. This enables fully automatic cutting of very long parts without the need to manually reposition the machine stop! • Full automatic cycle (hydraulic material feed, clamping, cutting, and ram return). • Integrated cooling system and blade cleaning brush. • LOADER INCLUDED – I have a forklift on site and can ensure the safe and efficient loading of this 2.5-ton machine onto your transport. The saw can be tested in a full automatic cycle during an inspection. Price: 26,000 PLN net (+23% VAT), negotiable. VAT invoice available.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 240 mm capacity 45 degrees: flat 240 x 160 mm capacity 60 degrees: round 160 mm Bwedps Afzuujfx Ap Iew capacity 60 degrees: flat 150 x 150 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW weight 1200 kg The MEP SHARK 331 DIRECT is a state-of-the-art, electro-hydraulic automatic bandsaw of the highest caliber. It has been specifically developed for the high-precision cutting of solid materials, pipes, profiles, and metal bars. Thanks to its extremely robust construction and maximum flexibility, it adapts perfectly to any industrial production process. CNC electro-hydraulic automatic bandsaw featuring: * Automatic mode – for fully automated series production * Semi-automatic mode – for controlled individual cuts Technical Highlights & Industry 4.0 Readiness - Direct control technology: * Makes the sawing machine fully digital, networked, and ready for . Seamless integration into automated production lines - Intuitive 10" touchscreen display: * The completely redesigned user interface minimizes staff training time and . ensures smooth process management. - Integrated cutting library: * Once the material dimensions, type, and thickness are entered, the control . system automatically suggests the best saw blade, the ideal cutting speed, . and the optimal force parameters. The operator, however, retains full manual . control at all times. - IIoT-ready & real-time support: * Real-time data transmission enables predictive maintenance, minimizing . downtime. If necessary, technical support can access the control system . directly via secure remote access—no VPN required. - Future-proof safety: * The machine already complies with the stringent safety and efficiency . standards set for 2027. - Massive data storage: * Capacity for up to 100,000 programs and 9,999 cutting sequences. Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) - MEP CNC "DIRECT" control technology * User interface with an intuitive 10" touchscreen display * Includes mechanical buttons * Ensures reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters * Swivel-mounted arm for convenient and safe operation * Display and logging of alarms and error messages * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts—possible on one side up to 60° - Protective enclosure for operator safety - Infinitely variable adjustment * Cutting speed from 15 to 100 m/min * Controlled via frequency converter (inverter) - Latest-generation hydraulic power unit * Highly efficient with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposing ball bearings * 600 mm single-stroke capacity, repeatable for cutting any desired length - Coolant tank integrated into the machine base - Chip-clearing brush - Bi-metal saw blade suitable for solid and profile materials - Tools and operating manual, including a spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = ± 0.1 mm per feed stroke Information from the manufacturer – please note: If this saw is installed in a system equipped with a residual current device (RCD/GFCI), i...

Condition: used, Year of construction: 1996, cutting diameter 15 - 300 mm saw band length 4640 mm cutting width 1,3 mm cutting range - square - 300 x 300 mm feed length 600 mm feed length: multiple 5400 mm dimensions of saw-band 4640 x 41 x 1,3 mm cutting speed 19 - 130 m/min min. cut-off length 10 mm Bwsdpfx Ajzwxxksp Isw height of material-table 700 mm total power requirement 7 kW weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,35 x 2,34 x 1,95 m Accessories: chip conveyor, DRO for cutting length, coolant

Condition: used, cutting diameter / mm saw band length / mm cutting width / mm Bjdpjzu A Tmefx Ap Isww

Condition: new, Technical specifications can be found in the PDF file. Installed special equipment: KL Material slide for sections LS Laserliner CD Saw band tension indicator SD Screw conveyor for chips HVP 300 CF-NC Clamping force (for both clamping bars) Bodey Tvxcspfx Ap Ioww MM Micro-spray system (cooling and lubrication with oil mist)

Condition: used, Year of construction: 1996, cutting diameter / mm saw band length / mm cutting width / mm Bwjdpfx Aezu A Tysp Ijw Manufacturer: KASTO Type: HBA 360 AU Year of manufacture: 1996 Machine number: 6016 109 181 Weight: approx. 2,600 kg Electrical connection: 400 V Frequency: 50 Hz Power supply: 3~ (three-phase current) Connected load: 10.0 kW Rated current: 35.0 A Maximum cutting range: approx. 360 × 360 mm Maximum round cut: approx. 360 mm Saw band length: approx. 5,334 mm Saw band dimensions: approx. 41 × 1.30 mm (depending on version) Cutting speed: approx. 14–102 m/min Automatic material feed: approx. 600 mm stroke Saw band drive: approx. 5.5–6.0 kW Version: automatic high-performance band saw machine Suitable for sawing round, square, and profile material CE marking present Note: The technical data listed above has been compiled based on the nameplate of the specific machine and available information regarding the KASTO HBA 360 AU. Individual technical specifications may vary depending on the year of manufacture, serial number, and equipment configuration. SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Bwsdpfxowm Rqtj Ap Isw Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: flat 230 x 200 mm capacity 60 degrees: round 175 mm capacity 60 degrees: flat 170 x 100 mm cutting speed 18 - 110 m/min vice max. 350 mm Bsdpsyy A Hyefx Ap Ieww dimensions of saw-band 3370 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight of the machine ca. 880 kg range L-W-H 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame * with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF)

Condition: reconditioned (used), Year of construction: 2020, Used MEP Shark 350 NC HS 5.0 automatic band saw Blade dimensions: 4640x34x1.1mm Blade speed: 15-115 m/min (inverter) Automatic blade tensioner: 1600kg Automatic chip conveyor Adjustable clamping pressure Cutting capacity: round 350mm, square 350x350mm Year of manufacture: 2020 Bwedpfjwwr Tqex Ap Iow Machine dimensions: 3045x2025x(H)2225mm Weight: 2800kg

Condition: good (used), Year of construction: 2001, Cutting 90°: 330 Cutting flat 90°: 330 x 330mm Cutting speed Vario:12 - 120 Bodpfxou R R Ace Ap Ieww Circle blade size: 6830 x 41 x 1,3mm Power: 7.5kW Length: 4600mm Width: 2150mm Height: 2310mm Weight: 4300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: Bwsdpeq Evn Ejfx Ap Ijw - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 19263.98, Offer 24149 Technical data: - Cutting area at 90° round 320 mm - flat 300 x 270 mm - Material feed stroke up to 500 mm - Multiple strokes unlimited - Remaining piece length in automatic mode 125 mm - Saw band dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - Hydraulic lifting - lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure continuously adjustable 0 - 10 m/min - Hydraulic material vice - Chip conveyor - Saw band cleaning brush Bwjdpfxevvim Tj Ap Iow - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

Condition: good (used), Year of construction: 2002, MEP automatic bandsaw Model Shark 320 AXI Year : 2002 Capacity round : 260 mm. Capacity 45 / 60 degrees : 230 mm. / 150 mm. Capacity square. : 320 x 220 mm. Bwodeyvzvxopfx Ap Iow Speed: 40 - 80 m./min.

Condition: new, Bernardo fully automatic double column bandsaw BSM 330 NC Pro Technical specifications Cutting range round: 90° 330 mm Cutting range flat: 90° 330 x 330 mm Cutting range square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Coolant pump: 0.135 kW Hydraulic pump motor power: 0.75 kW Motor power: 4.0 kW Machine dimensions: (LxDxH) 2520 x 2280 x 1630 ( depth: 3690 with feed roller conveyor) Weight approx.: 1990 kg Scope of delivery: - Saw band - Hydraulic vice, - Pressure gauge for band tensioning - Hydraulic saw band tensioner, - Hydraulic workpiece feed Bwedpfoqzhxiex Ap Iow - Hydraulic workpiece feed, - Chip conveyor (NC Pro) - Coolant device, - Hydraulic lowering cylinder - Work light, - Delta frequency inverter (NC Pro) - Delta frequency inverter (NC Pro,) - Motor protection switch - Motor protection switch - Automatic limit switch - Cutting pressure regulation - PLC control Delta - Automatic belt breakage control - Hydraulic bundle tensioning device - Feed roller conveyors

Condition: new, Year of construction: 2026, Model CORMAK BS370SA – Modern Automatic Band Saw for Metal The CORMAK BS370SA model is a modern automatic band saw designed for efficient series cutting of pipes, profiles, and solid materials with various geometries. Its robust construction, full automation, and high cutting accuracy make this machine ideal for use in production plants, tool workshops, and metalworking companies where repeatability and reliability are essential. Key Features of the Machine Automatic cutting cycle: clamping, material feeding, cutting, and arm return are all performed without operator intervention. Angle cutting capability across the full working range – up to 45° to the left and 60° to the right. Inverter-controlled band speed adjustable smoothly between 5–90 m/min. Hydraulic control of the arm and vise, ensuring precision and user comfort. Material feed system equipped with a 2450 mm roller conveyor, 370 mm feed per cycle, and ±0.2 mm accuracy. Controller with operator panel: allows programming of cutting parameters, monitoring part quantity, and error signaling. Construction and Technology The CORMAK BS370SA band saw is built on a rigid welded frame, ensuring operational stability and vibration reduction. The hydraulic feed and clamping system, precision blade guides, and stepless speed control guarantee high quality and safe operation. The machine is equipped with a roller conveyor to facilitate automatic material feeding. Precision and Performance Thanks to high-quality components and modern technical solutions, the CORMAK BS370SA band saw delivers repeatable and precise cuts. Adjustable cutting speed and hydraulic blade pressure ensure long tool life and full control over the machining process. Applications This machine is recommended for facilities involved in serial production, processing of steel, aluminum, and non-ferrous metal components. It is especially suitable as a band saw for pipes, profiles, and solid parts in the steel structure, prefabrication, and precision manufacturing industries. Standard Equipment Control console on a separate pedestal Hydraulic control of the vise and arm Roller conveyor for automatic material feeding Bwedpfsxiv Hcex Ap Iow Arm position memory Blade cleaning brush Cooling system with pump Bimetal band saw blade CE declaration of conformity and operation manual Technical Specifications Main motor power 1.5 kW (400 V) Hydraulic motor power 0.75 kW (400 V) Blade dimensions 3160 x 27 x 0.9 mm Cutting speed (stepless) 5–90 m/min Saw frame rotation angle Up to 60° Workpiece Cutting Capacity Angle Round ● Square ■ Rectangular ▅ 90° 270 mm 260 mm 370 x 220 mm 45° 240 mm 180 x 180 mm 240 x 160 mm 60° 160 mm 100 x 100 mm — Machine Dimensions Length: 3970 mm Width: 1850 mm Height: 1763 mm Net weight: 770 kg Gross weight: 925 kg The machine is also equipped with an additional roller conveyor: Length: 2450 mm

Condition: new, 300 mm 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m Unused display machine!!!! 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the Bwedpfx Apsxfwbts Isw target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In addition, the error code display system provides quick analysis for troubleshooting. )

Condition: excellent (used), Frietsch SAWMILL MACHINERY Buying and selling KASTO sawing machines Dear Sir or Madam, Bwedpfx Apofh Huko Iow We buy, sell, overhaul, repair, and repaint KASTO sawing machines. We have over 40 years of experience with KASTO sawing machines and have specialized in overhauling these machines. We can also handle KASTO control systems! The machines are overhauled by trained personnel according to KASTO factory standards. We also source KASTO sawing machines according to your specifications for machine overhauls. Excellent price-performance ratio thanks to professional machine overhauls.

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Bodeu R R Avepfx Ap Ioww Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Year of construction: 2026, Automatyczna przecinarka taśmowa CORMAK HR350SA to zaawansowane technologicznie rozwiązanie dla profesjonalnych zakładów przemysłowych, wymagających wysokiej wydajności, powtarzalności oraz precyzji. Dzięki zastosowaniu nowoczesnych komponentów i konstrukcji dwukolumnowej, ta piła taśmowa do metalu zapewnia niezawodną pracę nawet w intensywnych warunkach produkcyjnych. Przecinarka obsługuje tryb manualny i w pełni zautomatyzowany, co pozwala dostosować sposób pracy do indywidualnych potrzeb operatora i rodzaju ciętego materiału. Główne atuty maszyny Automatyczny cykl cięcia – pełna automatyzacja procesów mocowania, podawania, cięcia i podnoszenia ramienia. Dwukolumnowa konstrukcja – zapewnia wyjątkową sztywność oraz precyzję prowadzenia brzeszczotu. Docisk imadła od góry – umożliwia bezpieczne i efektywne cięcie pakietów rur oraz profili. Hydrauliczny system podawania – precyzyjne pozycjonowanie detalu z dokładnością ±0,2 mm. Intuicyjne sterowanie – panel dotykowy LCD umożliwia szybkie ustawienie parametrów cięcia. Budowa i technologia Korpus przecinarki wykonany został z żeliwa, co zapewnia znakomitą tłumienność drgań i stabilność podczas pracy. Rama nośna nachylona pod kątem 3° względem stołu zwiększa efektywność przy cięciu elementów o przekroju prostokątnym. System prowadzenia brzeszczotu opiera się na precyzyjnych prowadnicach z łożyskami oraz wkładkami z węglików spiekanych, co redukuje zużycie taśmy i podnosi jakość cięcia. Hydrauliczne napinanie taśmy oraz trzybiegowy silnik z falownikiem gwarantują idealne dopasowanie parametrów do rodzaju materiału. Precyzja i wydajność pracy Dzięki zastosowaniu zaworu dławiącego możliwa jest płynna regulacja prędkości opadania ramienia, co przekłada się na kontrolowane cięcie bez ryzyka uszkodzenia detalu. System szybkiego posuwu skraca czas cyklu, a szczotka czyszcząca i system chłodzenia zwiększają żywotność piły. To niezawodne rozwiązanie dla wymagających klientów, którzy oczekują efektywności i powtarzalności. Zastosowanie Model HR350SA to idealna przecinarka taśmowa do rur i profili, stali konstrukcyjnych, nierdzewnych oraz innych metali. Przeznaczona do zastosowania w zakładach ślusarskich, firmach produkcyjnych i centrach obróbczych, gdzie kluczowe są wysoka jakość, automatyzacja i bezpieczeństwo pracy. Wyposażenie standardowe Tryb pracy automatyczny i manualny Panel sterowniczy z ekranem dotykowym LCD Hydrauliczne imadło z dociskiem górnym Szczotka czyszcząca taśmę z napędem Hydrauliczne napinanie taśmy Układ chłodzenia cieczą Bimetaliczna piła taśmowa Deklaracja zgodności CE i DTR Wyposażenie opcjonalne Rolkowe przedłużenia stołu podawczego Dane techniczne: HR350SA Zakres cięcia Ø350 mm / 350 x 350 mm Taśma 4515 x 34 x 1,1 mm Prędkości cięcia 27 / 45 / 69 m/min Moc całkowita 4,8 kW Zasilacz hydrauliczny 0,75 kW Pompa chłodziwa 0,04 kW Napinanie taśmy hydrauliczne Skok podajnika 500 mm Nośność 1500 kg Bedpfewdunwox Ap Ieww Wysokość stołu 700 mm Wymiary (D x S x W) 2800 x 2200 x 1700 mm Waga 1500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 330 mm, cutting width (max.): 330 mm, control type: CNC control, actuation type: electric, rotational speed (max.): 85 rpm, rotational speed (min.): 34 rpm, total height: 1,400 mm, total length: 2,150 mm, total width: 2,000 mm, overall weight: 1,499 kg, table height: 650 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, SALE – 5% OFF Bedpfx Apszd T H Ae Isww CNC COLUMN TYPE METAL BANDSAW M2-330C The MTP 330×330 Column Type Metal Bandsaw is a professional cutting machine designed for manufacturing facilities, metal workshops, and steel processing companies. Thanks to its rigid column construction, efficient hydraulic system, and large cutting capacity, the machine delivers excellent cutting accuracy, reliability, and operator comfort. The column-guided design ensures stable movement of the saw frame, resulting in precise cuts and extended blade life. The machine is ideal for cutting profiles, pipes, shafts, bars, and solid materials made of structural steel, stainless steel, aluminum, and other non-ferrous metals. MAIN ADVANTAGES • Rigid column-type construction • Maximum cutting capacity: 330 × 330 mm • Hydraulic feed system • 4 blade speed settings • Efficient coolant system • High cutting accuracy and repeatability • Designed for continuous operation • CE certified PRECISE CUTTING The rigid construction and professional blade guidance system ensure high-quality cutting results while reducing material waste. The hydraulic feed allows smooth adjustment of the cutting process according to the type and size of the material being processed. POWERFUL DRIVE SYSTEM The bandsaw is equipped with a 4 kW main motor and a 0.75 kW hydraulic power unit, ensuring reliable performance even when cutting large material sections. COOLING SYSTEM An integrated coolant pump with a power output of 60 W effectively removes heat generated during cutting, extending blade life and improving cutting quality. APPLICATIONS • Steel profiles • Round and rectangular tubes • Solid bars • Steel shafts • Structural components • Stainless steel • Aluminum and non-ferrous metals Thanks to its large cutting capacity, the machine is suitable for both single-piece and serial production. SAFETY The machine is equipped with protective covers, safety switches, and CE-compliant safety features to ensure safe operation in accordance with European standards. TECHNICAL SPECIFICATIONS Maximum cutting capacity: 330 × 330 mm Blade speed: 34 / 51 / 60 / 85 m/min Feed stroke: 500 mm Blade size: 34 × 1.1 × 4115 mm Main motor power: 4 kW Hydraulic motor power: 0.75 kW Coolant pump power: 60 W Material feeder dimensions: 600 × 360 × 630 mm Working table height: 650 mm Weight: 1499 kg Machine dimensions: 2150 × 2000 × 1400 mm DELIVERY AND SUPPORT We organize machine transportation throughout Europe. We provide technical support, assistance with machine selection, and access to spare parts and service. CONTACT US If you require additional information or a personalized quotation, our specialists will be happy to assist you. We also invite you to explore our full range of metalworking machinery available on our website.