Condition: good (used), Year of construction: 2000, Cast iron measuring and marking table with under-table cabinet, STOLLE MT1000. Csliq Evewffz Docogt Table: 1000 x 1000 mm Height: 1000 mm Weight: approx. 650 kg In good condition.

Condition: good (used), Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 3163870, overall weight: 700 kg, total width: 800 mm, total length: 1,300 mm, total height: 2,400 mm, volume flow: 1,500 m³/h, - Operating voltage: 230/400 V - Frequency: 50 Hz - Connected load: 4 kW - Operating pressure: ±50 mbar - Max. operating temperature: 40 °C - Separator type: Wet separator - Air flow rate: 1,500 m³/h - Available negative pressure at the raw gas connection: 700 Pa - Max. sound pressure level: 75 dB Csliq Esv Tq Hcsvcsgt - Nominal diameter of the clean gas connection: 450 mm - Water capacity of the disposal container: 150 l - Fan data – Total pressure: 5,000 Pa

Condition: good (used), Year of construction: 1997, - Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 21 mm Cgeliqowfd A To Evcjt - Material slide length N - Last installed on INDEX DG 20 - Centering device - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm 3 bar loaders are available!

Condition: as good as new (ex-display), Make Kellenberger: swiveling dressing device for internal grinding with micro adjustment u. Dial gauge 1/1000 mm adjustable to workpiece dimension Cgsliq Eed Tgnnovcet diamond holder: MK 0 diamond 0,5 carat for center height 175 mm

Condition: used, Year of construction: 2022, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. ca. 0,7 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BÜRENER MASCHINENFABRIK - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: Cgelijwd Txujq Evcot - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW - Pump power: 5.5 kW, 2,950 rpm

Condition: used, Year of construction: 2000, swing diameter 530 mm Cgeliqowdiwte Evcot 0 620 mm Wheel width 20 mm roll diameter 45 mm total power requirement ohne kW weight 250 kg dimensions of the machine ca. 1,2 x 0,30 x 1,3 m

Condition: excellent (used), SK 50 chucks DIN 69871 Manufacturer: Whistle Notch Stock number (28607) Diameter: 6 - 12 - 14 - 18 - 20 - 25 mm Cjliowc N Txsq Evcegt Pack of 6, €120 Weight: 18 kg

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet, all holders with c6 have been removed, no longer available pallet 5 (photo 1 to 4) euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 (photo 5 to 8) euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 (photo 9 to 12) euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 (photo 13 to 16) euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc Cgsliq Evsvry T Nscst

Condition: good (used), Year of construction: 2000, - Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 17 mm - Material slide length N - Last installed on INDEX DG 12 - Centering device - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm Csliq Evewfdwkecogt

Condition: as good as new (ex-display), Corundum grinding discs 300 mm Ø x 40 mm x 25 mm Ø, 4 pieces quality 31A60M6V511 and 4 pieces quality 10A24Qu4 Corundum grinding discs 300 mm Ø x 40 mm x 76 mm Ø with recess 125 mm Ø x 20 mm, 2 pieces quality 31A60M6V511 and 2 pieces quality 10A24Qu4V1 Corundum grinding discs 200 mm Ø x 32 mm x 51 mm Ø, 3 pieces quality 31A60M6V511 and 3 pieces quality 10A24Qu4V1 Coliqouv Ecbs Evcjgt

Condition: good (used), rotary table, rotary indexing table, dividing head, dividing head -Dividing head:Dividing head with three-jaw chuck -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm -Spindle bore: Ø 25 mm Csliqjwc Sgzj Evcegt -Dimensions total: 510/480/H250 mm -Weight: 69 kg

Condition: good (used), Year of construction: 2006, Previous use : Extraction of graphite dust Protection class IP65 Negative pressure approx. -27m/bar Cgeliswg A Hyoq Evcot Air flow rate 2650 m³/h Air flow rate at fan 4500 m³/h Motor 2.2 kW .

Condition: excellent (used), Stair Treads (Clamping Tools) Csliqswc N Rwe Evcsgt Stock Number (28606) 4 x 95 mm 4 x 140 mm 4 x 230 mm 4 x 320 mm Unit prices upon request

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet, all holders with capto c6 have been removed, no longer available pallet1 (photo 1 to 4) euro 3220 total 4x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet2 (photo 5 to 8) euro 3130 total 4x driven tools vdi 40 euro 580/pc (1x new) 9x tool holder vdi 40 euro 90/pc pallet3 (photo 9 to 12) euro 3130 total 4x driven tools vdi 40 euro 580/pc (1x new) Cgoliq Esvpvmtovcst 9x tool holder vdi 40 euro 90/pc pallet 4 is sold

Condition: used, Year of construction: 1970, 150 mm 500 mm weight of the machine ca. 0,75 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Celiqogvi I He Evcsgt

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Dividing attachment with: three-jaw chuck and crank -Chuck: Ø 160 mm Cgelijfk Affsq Evcet -Dividing head: rotatable, swiveling -Dimensions: 540/470/H250 mm -Weight: 67 kg

Condition: excellent (used), Workbench Brand Garant Kombi, lockable Cgsljwc Nvtjiq Evcjt Width 1500 mm Depth 700 mm Height 850 mm Height with pegboard 1330 mm Total width with vise 940 mm Vice Leinen junior 125 Base cabinet with 5 drawers 1 x 50 mm high 1 x 90 mm high 1 x 125 mm high 1 x 165 mm high 1 x 225 mm high

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Reckermann, dividing head with: three-jaw chuck -Type: UTA 125 Coliq Eohikzwovcjgt -Three-jaw chuck: Rohm Ø 160 mm, inner Ø 32 mm -Spindle bore: Ø 25 mm -Dimensions: 500/420 / H220 mm -Weight: 54 kg

Condition: excellent (used), Extension for HILMA vice jaw width 160 mm Cjlenl Drzeiq Evcogt Jaw width extension length of tie rod 560 mm Weight 21,5 kg

Condition: good (used), Clamping head, dead-collet chuck, collet sleeves, collet, tool holder, milling chuck, milling tool, clamping sleeves -Clamping sleeves: 17 pieces Cgslswc R Dfoiq Evcot -Diameter: Ø 6 - 20 mm, see photos -Price/Delivery: complete -Transport dimensions: 230/120/H60 mm -Weight: 2.5 kg

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping Celiqowc Ry He Evcjgt -Wall thickness: 25 mm -Groove: 20 x 100 mm -Dimensions: 325/198/H222 mm -Weight: 22.1 kg

Condition: good (used), faceplate, faceplate chuck, four-jaw chuck, facing chuck -Faceplate: chuck size Ø 490 mm -Mounting: Thread M105 x 6 -Bolt circle: mm -Through hole: Ø 126 mm -Groove width: 20 mm -Dimensions: Ø 490 x 185 mm Celiq Eowc Rrpjvcogt -Weight: 96 kg

Condition: good (used), faceplate, faceplate chuck, four-jaw chuck, facing chuck Cjliowc Rkxjq Evcjgt -Faceplate: chuck size Ø 500 mm -Mounting: Short taper 8 (Ø 136-139 mm) -Bolt circle: Ø 173 mm -Through hole: Ø mm -Groove width: 20 mm -Dimensions: Ø 500 x 120 mm -Weight: 58 kg

Condition: good (used), faceplate, faceplate chuck, four-jaw chuck, facing chuck -Faceplate: chuck size Ø 500 mm -Mounting: Short taper 8 (Ø 135-138 mm) -Bolt circle: Ø 170 mm -Through hole: Ø mm -Groove width: 16 mm -Dimensions: Ø 500 x 210 mm Csliqowc Rihj Evcogt -Weight: 91 kg

Condition: good (used), gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available -Price: per piece Cgelswcxtzsiq Evcst -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece