Used 3D Printers for sale (173)

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Bwodpfx Adsnkalgjxsw Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,200 h, High-end 3D printer for processing precious metals! Bodpfxjxfz Hgo Adxoww TECHNICAL DETAILS Technology: DMLS (Direct Metal Laser Sintering) Build Volume Diameter: 80 mm Build Volume Height: 95 mm Layer Thickness: 20 µm Laser Type: Yb fiber laser 100 W Scanner: High-speed scanner, F-Theta lens Scan Speed: up to 7 m/s Beam Diameter: Laser focus >30 µm MACHINE DETAILS Dimensions & Weight Dimensions: 800 x 950 x 2,250 mm Weight: 580 kg Power Supply: 200-240 V Network Connection: Ethernet Machine operating hours: approx. 1,200 EQUIPMENT Software: EOS RP Tools, EOSPRINT Software license for silver powder Micrometer for height measurement 3 new steel build plates At least 4 used steel build plates, still usable USB key for software programs Note: It is recommended to have the machine serviced before commissioning. The manufacturer offers this service for approx. €5,000 including possible spare parts.

Condition: used, TECHNICAL DETAILS - Max. print size : 490 x 390 x 200 [mm] - Max. print volume : 38.22 [L] Bwjdpfxjuhcbps Adxjw - Min. print thickness : 0.02 [mm] - XY accuracy : 0.03 [mm] - Materials : Thermoplastic - Power supply : 110-240 [VAC] 50/60 [Hz] 1.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1,400 x 1,260 [mm] - Machine height : 1.100 [mm] - Machine weight : 429 [kg]

Condition: like new (used), functionality: fully functional, Year of construction: 2022, total length: 1,480 mm, total height: 2,040 mm, total width: 850 mm, overall weight: 360 kg, input voltage: 220 V, input current: 32 A, Mint condition XYZPrinting MfgPro230xS 3D printer from 2022. The device has hardly been used and is in excellent condition - perfect for anyone looking for a reliable and powerful 3D printer. Why the XYZPrinting MfgPro230xS? Bwodjt H I Tvepfx Adxjw Outstanding print quality: With its precise printing technology and a resolution of up to 50 micrometers, the MfgPro230xS delivers impressive print results that meet the highest industrial standards. High printing speed: Save valuable time during production. The MfgPro230xS offers fast printing speed without compromising on quality. Large installation space: With a generous print volume of 230 x 230 x 230 mm, even larger projects are no problem. Ease of use: The simple operation and intuitive interface make this 3D printer easily accessible even for beginners. Reliability: Thanks to its robust design and high-quality components, the MfgPro230xS is extremely durable and reliable. With the XYZprinting MfgPro230 xS industrial 3D printing system, the most complex structures can be produced in one piece and without support structures using selective laser sintering in your workshop. Developed for professional use as well as for use at institutes and universities. Accessories: Sinterit FZ138 PHS Station Sinterit FZ101 ATEX Vacuum Cleaner 230V Sinterit Sandblaster SLS N2 Generator

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,438 h, TECHNICAL DETAILS Bwedpfx Adsv U Uw Iexew Max. build volume: 356 x 305 x 305 mm Material type used: ASA Material types according to manufacturer: ABS-M30, ABS-M30i, ABS-ESD7, ASA, FDM Nylon 12, FDM Nylon 12cf, PC-ABS, PC, SR20, SR30, SR35, SR100, SR110, PC-BASS Accuracy: ± 0.127 mm or ± 0.0015 mm (depending on material) MACHINE DETAILS Network LAN connection: required for communication and file transfer Interface: 100 Base-T, Ethernet protocol, RJ45 IP configuration: DHCP or static EQUIPMENT - 3x400 V to 3x230 V transformer included

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1904P201, Year of construction: 2019, total length: 1,950 mm, total height: 1,790 mm, total width: 2,430 mm, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, power: 5.8 kW (7.89 HP), For sale is a BigRep-PRO, which unfortunately doesn't receive the attention and use it deserves and has become too large for our purposes. We purchased the device directly from the manufacturer, and everything has been serviced and maintained by specialists from BigRep GmbH, who took care of the machine so that we can hand it over with peace of mind. The only issue, as you can see in the pictures, is the pane on the left door, which we had to replace because the old one broke accidentally. However, it doesn't affect its functionality or anything else, just a cosmetic flaw. However, the entire device is still packaged in the manufacturer's film, which, as you can clearly see, is practically factory-made. Bedsv In Hcjpfx Adxjww Depending on our agreement, we can also include some filament (which is large for approximately 15 rolls). The device can be viewed and inspected on-site - appointments can be arranged. If you have any further questions, please contact us directly.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Bwodpfx Adeqy Edyjxsw Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, HP Jet Fusion 4200 3D Printing Solution 3D printer, processing station and two build units are in excellent used condition. It was operated in a controlled laboratory environment for the production of orthotic and prosthetic devices and has been under continuous HP service support during its entire operation. Bwedpfx Aowaw Hbjdxsw Why choose the HP Jet Fusion 4200? • High Productivity: Designed for industrial-scale production, with fast build speeds and short cooling cycles. • Superior Part Quality: Produces strong, functional parts with excellent surface finish and dimensional accuracy. • Cost-Effective Production: Low cost per part with optimized material usage and minimal waste. • Reliable and Proven Technology: Trusted by manufacturers worldwide for its consistency and performance. • Easy Integration: Seamless workflow with HP software solutions and optional post-processing stations. Technical Specifications: • Build Volume: 380 x 284 x 380 mm • Layer Thickness: 0.08 mm • Print Speed: Up to 4500 cm³/hr • Material Compatibility: HP 3D High Reusability PA 12, PA 11, and other supported materials • Connectivity: Gigabit Ethernet Typical Applications: Functional prototypes, production parts, orthotics & prosthetics, jigs & fixtures This is a great opportunity to acquire a professional industrial 3D printer with a strong track record, at a fraction of the original cost.

Condition: refurbished (used), For Sale: EOS P730 – Guaranteed Working Condition This EOS P730 has been fully cleaned and revised by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Synrad 48-5 CO2 lasers, this high-performance machine is designed for demanding SLS production environments. Available Accessories: We offer a variety of optional accessories to enhance your setup, including: • Docking station Bwodpfx Adjq E I Anoxow • Transitube • IPCM P • Unpacking station • Build frames Upgrade Options: Take your EOS P730 to the next level with available upgrades, such as: • Coherent C70 laser upgrade for enhanced performance • Laser window upgrade for improved efficiency • And more! Contact us for details. Materials Highlight We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers excellent performance at a fraction of the cost of OEM powders, helping you reduce production expenses without compromising on quality. Services Included: • Transport & Installation: Safe delivery in original EOS packaging and professional installation services. • Warranty & Maintenance Plans: Flexible options available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: Cost-effective consumables like our plug-and-play PA12, fully tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Choose IM3D for dependable machines, premium materials, and the expertise to maximize your SLS production. Contact us today for more information or specific inquiries!

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible through 2 connections for external N2 generators (optional) Installation space 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501 hours Laser 2: 503 hours Other devices: Inox 200 lifting device Weight: 102 Kg Max lifting capacity 135 Kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions 800x480-570x755-850 mm Drive type: alternating current Power 1.25 kw Voltage 230 V 9.2 A Protection class IP65 Frequency 50 Hz Housing: sheet steel Performance 130 m³/h Permanent negative pressure -145 mbar Short-term negative pressure -235 mbar Liquid volume 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) Bwsdpsu Ebybjfx Adxow We will be happy to answer any further questions you may have over the phone.

Condition: refurbished (used), EOS P385 printer, fully inspected and refurbished! Supplied with 2 building frames and water cooler. Technology: SLS Materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, etc. Bjdon R Nikepfx Adxsww Construction volume: 320x 320x 620mm Laser model: synrad 48-5, 50W CO2 laser All materials unlocked and parameter editor! We can take care of the transport and installation. Warranty and maintenance plans available. More information available on request.

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) Bedpfx Adoft R Swoxoww (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: reconditioned (used), For Sale: EOS M400 – High-Performance Metal 3D Printer This EOS M400, is a cutting-edge metal additive manufacturing system located at the customer’s site. It is equipped with a 1kW laser, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 1kW • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: Bwjdpfx Adevq Sm Esxjw This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1 • Aluminum alloys: AlF357_1, AlSiMg_1 • Copper alloys: CuCrZr_1, Cu_1 • Stainless steels: GP1_1, PH1_1 • Tool steels: MS1_1, SP2_1 • Titanium alloys: Ti64_1, Ti64ELI_1, Ti64Grade23_1, TiGrade5_1, TiCP_1 • Custom gas options: CustomAr, CustomN2 • Cobalt chrome: MP1_1 Why Choose the EOS M400? • Large build volume for industrial-scale production. • High laser power for enhanced speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office Bsdpfek Hz Nqjx Adxsww X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2019, temperature: 1,300 °C, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price - guaranteed sale to the highest bidder! HIGHLIGHTS - Complete end-to-end solution including washing station and sintering (sintering tank not included) - Machine has been barely used - Suitable for printing parts made of 17-4 PH stainless steel, D2/A2/H13 tool steel, and copper TECHNICAL DETAILS Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Build volume: 300 x 220 x 180 mm Layer thickness: 50 µm and 125 µm after sintering Maximum part size: 250 x 183 x 150 mm, 10 kg Software: Eiger Cloud Sintering Sintering capacity: 3,020 cm³ (184 in³) Sintering surface area: 348 cm³ Sintering time: 26 hours Sintering gas types: Argon, Argon-hydrogen mixture Maximum temperature: 1,3000 °C Washing Washing capacity: 18,356 cm³ Washing volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Bwedov Hpi Aopfx Adxsw Fluid: Opteon SF79, Opteon SF80, or Tergo metal cleaning fluid MACHINE DETAILS Dimensions (printer): 575 x 467 x 1,120 mm Weight (printer): 75 kg Dimensions (wash unit): 609 x 685 x 1,067 mm Weight (wash unit): 136 kg Dimensions (sinter): 1,270 x 510 x 720 mm Weight (sinter): 136 kg EQUIPMENT - Printer + Wash-1 unit + Sinter-1 unit (without sinter core unit) - Two-nozzle printing system - Heated print chamber - Vacuum-sealed print bed - Automatic leveling

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. Bwsdpohb Dtpofx Adxjw This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: refurbished (used), For Sale: EOS P395 – Guaranteed Working Condition This EOS P395 is fully inspected and revised by Inframotion 3D (IM3D) to ensure top performance. Equipped with a reliable Synrad CO2 laser, this machine is ideal for efficient SLS production. Included in the package: Bsdeq E I A Dopfx Adxoww • 2 build frames • Water cooler Materials Highlight We offer a range of plug-and-play materials that are fully tested and optimized for use with EOS systems. Our Inframotion PA12 provides exceptional performance and offers significant cost savings compared to OEM powders. By switching to our materials, you can lower production costs without sacrificing quality or reliability. Services Included: • Transport & Installation: We ensure safe delivery in the original EOS packaging and provide professional installation. • Warranty & Maintenance Plans: Flexible options are available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables like our plug-and-play PA12, tested and optimized for EOS systems, offering significant cost savings. • Complete support: From transport to tailored maintenance plans, we handle everything. Trust IM3D for dependable machines, premium materials, and the expertise to optimize your SLS production. Contact us today for more information or specific inquiries!

Condition: excellent (used), Here we offer an Eos EOSINT plastic laser-sintering system. The following things are included in the EOS P380 system Construction space container Powder hopper Overflow container Cooler: Termo TEK Termochiller type: P411-12448-1 3DM 8 zones process chamber heating 250°C Bwjdpogqux Njfx Adxow Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse protection 32 A MAX. Laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone. Bedpfx Aou Ebt Usdxoww

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Bwodpoivpdwjfx Adxjw Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) Bjdpfx Aewnpbgsdxsww We would be happy to answer further questions by phone. Written orders possible by email or fax

Year of construction: 2009, condition: excellent (used), The Objet Connex 500 is Objet's groundbreaking 3D printer for multiple materials. 500 x 400 x 200 mm in size, designers and engineers can quickly create prototypes to simulate the intended end product closer than any other technology. What's unique about Objet Connex? With Objet's patented simultaneous multi-material spray technology, the Objet Connex 500 can print models of up to 14 different materials in a single print job.The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™.It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics.Outstanding Productivity The Objet Connex 500 offers:- Multi-Material Models - No need to design, print, and glue separate model elements- Different parts- Multiple materials models - No need to design, print, and glue separate model elements- No need to design, print, and glue separate parts- No need to select your own materials to effectively highlight different material components in complex or composite products. Different materials. Same compartment - saves time and meets multiple requirements simultaneously - Excellent 16 micron high resolution pressure accuracy - 600 DPI X Bwjdpfxod Sukxo Adxsw

Condition: excellent (used), SLM Solutions Type: SLM 125 Bwjdpsu Ebufjfx Adxow Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Bodpfx Adoqzgvasxeww Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Bwodpfx Asvvlduodxow Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.