Profile bending machine

ZOPF ZB 140/3 H 2

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Lifting height 9 meters Giodeqiz N Repfx Abysp

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Giedow Sx Agepfx Abysp

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET351P5-offAD-Bypass - 2200373733, cooling capacity: 66 kW (89.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,082 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 11.2 m³/h, pump pressure: 4.68 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, water chiller; cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: - Open fill system / attached tank - Bypass with manual valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Start-up current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technical OK Giodpowlt Rasfx Abyjp used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual imperfections due to their usage. (Subject to technical changes and prior sale!)

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) Giodpfxsq D Dzle Abyep - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05 Tube length ----- 1 350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0-850°/sec Length feeding ----- Standard 0-2 400 mm/sec Booster ----- 0-1 200 mm/sec Degree of tolerance ----- 0,05°/mm Bending head rotation ----- 0,75 sec Godpfx Aboga T Exoyoip Standard components conform to VDMA, ISO and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Giedpfjxcgy Hsx Abyjp Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: good (used), Automatic ROPP Capper Make: Bertolaso Typ: Automatic ROPP (pilfer-proof) Capper Model: Alfa 110-VH40 speed: Up to 2.000 caps/hr Dimensions: L x W x H = 1.800 x 800 x 1.800 mm electric: 380 Volt – 50 Hz Tooling: Customer choice Gisdpfx Ajg Dvfwobysp Features:Included cap sorting as-is or adjusted to customer needs

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade Gedpfx Ajd Hxx Asbyjip - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: good (used), 10,000 pieces Inserted gratings Gratings for pallet racks galvanized Inlay grids in different sizes, mesh sizes, load-bearing bar and weight load available: Negotiation price: from € 15,-- net per m² from stock Larger quantities on request! Insertion grid Mesh width Load bearing bar Load bearing bar direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99,5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Second-hand, very good condition, see pictures. Goods are in stock. Transportation possible on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Gedjd Hvvgopfx Abyoip Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations quick-

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Probe changer Renishaw Gijdpfxsdv I Abe Abyop (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version built 2014, retrofit 2017 with Revo