Tube bending machine

Zopf R 1

Year of construction: 2001, condition: used, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 500 mm table clamping surface:: 400 x 300 mm table load: 50 kg semi-automatic operated: LASERSOFT 3D laser capacity: 100 W total power requirement: 27 kVA weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3,5 x 2,8 m CNC engraving/texturing/labeling/contouring-laser maschine, Nodpfxoikbtns Aaaocr approx. 9.000h "machine on", approx. 5.500h "laser on" *

Condition: as good as new (ex-display), Various designs such as round, hexagonal or square and in smooth smooth version, cross-grooved version or with longitudinal and transverse grooves. A current list of available new and as-new SK32/SK42/SK52/SK65/SK80/SK100 expansion chucks can be found on our homepage. Njdpfxoh Dmamj Aaaocr We look forward to your inquiry. STALEX Machine Tools GmbH

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Nedpfjg Ufvbsx Aaaecr Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: excellent (used), Genini Miniautomatic Pass-Through Lathe Turning machine from square timber Main spindle with a two-speed motor with a power of 4.9/5.9kw Ncodov Hgctjpfx Aaajr Hydraulic pump motor with a power of 1.5kw Maximum length of square timber 950mm Maximum turning length 120mm Maximum turning diameter 80mm Two supports with profiling knives 1 front spindle for drilling or front profiling 1 roughing turning knife Machine weight approx. 1800kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm Ncsdpofx Hv Hsfx Aaasr clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Year of construction: 2012, condition: excellent (used), Description to follow! Nodsx A H Rxopfx Aaascr

Condition: new, plate thickness 1,6 mm Nodpfjftd Uaox Aaajcr 4 t blade length 156 mm angle adjustable from - to fest Grad table surface area 450m x 305 mm total power requirement Handbetrieb kW weight of the machine ca. 95 Kg Dimensions (LxWxH) 530 x 380 x 480 mm

Condition: good (used), Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe Ncsdoyaypkepfx Aaajr -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed Ncsdjtr U Hlepfx Aaaor → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min Ncodpfsvpt Eyex Aaaer cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, *