ZEISS CONTURA 10/16/6 G2 HTG Gold XT

ZEISS CONTURA 10/16/6 G2 HTG Gold XT

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 30, DMG MORI DMU 50, 3rd Generation 5-Axis Universal Machining Center Manufacturer: DMG MORI Model: DMU 50, 3rd Generation Year of Manufacture: 2018 Control System: Siemens 840D sl Operate with CELOS Operating Panel: 21.5-inch ERGOline Multi-Touch Dcodj Agnykopfx Aqvsp Technical Data Machining: 5-axis simultaneous machining NC rotary table Travel distances: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Swivel/Rotary Axes: B-axis: -35° to +110° C-axis: 360° Worktable: Clamping area: Ø 630 × 500 mm Maximum table load: 300 kg Main Spindle: speedMASTER motor spindle Spindle speed: 20–15,000 rpm Tool interface: SK40 Spindle power: 21 kW (40% duty cycle) Continuous power: 16 kW (100% duty cycle) Tool Changer: Tool magazine: 30 positions Tool interface: SK40 Feed Rate: Rapid traverse X/Y/Z: 42 m/min Special Equipment Internal coolant supply (IKZ) with 40 bar Coolant system with 600 liter tank Paper band filter system including cabin roof Chip conveyor with scraper chain Double-stage filter, 25 µm, manually switchable Blow-off air through spindle center, selectable via M-function Renishaw PP60 optical infrared workpiece measuring probe (OMP60) Heidenhain TT160 tool measurement Tool length and diameter measurement Tool breakage detection 3D quickSET for checking and correcting machine kinematics ATC – Application Tuning Cycle Electronic handwheel Flushing gun for chip removal Total spindle hours: approx. 18,600 New spindle replaced in 2021 at approx. 5,800 hours

Condition: used, CNC CONTROL Controller: Hurco MAX5 AXES Number of controlled axes: 5 Number of simultaneous axes: 5 X-axis travel mm: 3.200 Y-axis travel mm: 2.100 Z-axis travel mm: 900 B-axis degrees: Dsdpfez Aqhbex Aqvocp C-axis degrees: ±360 Distance spindle nose - table surface mm: 66 - 966 Feed rates m/min: 10 / 10 / 10 Rapid traverse m/min: 15 / 15 / 10 WORKTABLE Table dimensions mm: 3.000 x 1.700 Number of T-slots: 7 T-slot width mm: 22 H8 T-slot spacing mm: 220 Max. table load kg: 11.000 SPINDLE Max. spindle speed rpm: 18.000 Spindle power kW (S1/S6): 45 / 63 Spindle torque Nm: 106 Spindle taper / interface: HSK63-A COOLING Coolant through spindle bar: 40 TOOL SYSTEM Tool holder / taper: HSK63-A Tool magazine capacity: 60 Max. tool diam. (free adj. places) mm: 76 Max. tool length mm: 300 Max. tool weight kg: 7

Condition: used, Used 3D CNC coordinate measuring machine. ZEISS Prismo 7 – upgraded in 2016 with UCC control, PH10M rotary-head-system, joystick box, SP25 scanning probe, and a PC with RationaDMIS 3D software. Further details available upon request Measuring range X = 900 mm - Y = 1200 mm - Z = 700 mm Price: upon request ᐳᐳᐳ One-of-a-kind item - while available ᐸᐸᐸ Request our detailed quote. Dcsdpfx Aoy Nzk Aeqvep Of course, we provide all services such as installation, maintenance, service, training, programming, etc.

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Dcjdpfxsw H Au Rj Aqvsp

Condition: excellent (used), Year of construction: 2016, operating hours: 3,300 h, functionality: fully functional, Manufacturer: DMG MORI Model: ecoMill 70 Year of manufacture: 2016 Control system: Siemens Machining: 3+2 axes Dedpfxjz S Uyrj Aqvscp Internal cooling (IKZ): available Spindle hours: approx. 3,300 h X-axis: 750 mm Y-axis: 600 mm Z-axis: 520 mm Machining: 3+2-axis positioning B-axis: -10° to +95° C-axis: 360° Rapid traverse X/Y/Z: 24 m/min Max. feed rate: 24,000 mm/min The machine is in very good condition.

Condition: ready for operation (used), Year of construction: 2023, A Mitutoyo CNC bridge coordinate measuring machine is available. Travel X/Y/Z: 1200mm/2000mm/1000mm, measuring volume: 2.4m³, max. workpiece weight: 2500kg, max. workpiece height: 1000mm, probe system: Renishaw, probe positions: 20, measuring accuracy: 2.3+/-0.3/100µm, max. travel speed: 693mm/s. Machine dimensions X/Y/Z: approx. 3400mm/2200mm/3600mm, weight: approx. 6150kg, control: Mcosmos-3 V4.3. Documentation available. An on-site inspection is possible. Dodpfx Aqezhnrbevocp

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - center height : 175 [mm] - Table orientation : 9 [°] GRINDING WHEEL HOLDER HEADSTOCK Djdpjzfqzaefx Aqvjcp - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] - Boring for internal spindle : 90 [mm] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK - Internal cone : Morse 3 - Quill stroke : 30 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2860 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Kelco 5 display - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 5400 [rpm] - Chuck 4 jaws - 1 three-key steady rest - Set of wheels

Condition: excellent (used), Year of construction: 2017, CNC Turning and Milling Center DMG Mori CTX gamma 1250 CT (Year 2017) Available from March 2027 Base Machine - CTX gamma 1250 CT with turning length 1,250 mm - Main spindle as integrated spindle motor (ISM102) - Drive power: 35/45 kW (100/40% duty cycle) - Speed: 4,000 rpm - Partial hollow clamping device (hydraulic) - Draw tube inner diameter: 104 mm, depth: 848 mm - C-axis and hydraulic spindle brake - Chuck flushing device on main spindle (external) - Upper cross slide with turning/milling spindle as motor spindle: - Speed: max. 12,000 rpm - Power: 27 / 36 kW (100% / 40% duty cycle, 2 min) - Torque: 160 / 220 Nm (100% / 40% duty cycle, 2 min) - Hydraulic clamping during turning - Tool interface: HSK-A 63 DIN 69893 - Y-axis: ±210 mm - B-axis: ±120°, torque motor - Tool disc magazine: 36 positions - NC tailstock with supported, hydraulically movable quill and fixed center - Absolute, direct linear measurement systems in X-, Y-, and Z1-axis - Coolant pump: 6 bar, 20 l/min, fabric filter, filter fineness 100 µm - Cooling system for spindle motors, motor unit, turning/milling spindle, and B-axis torque motor - Control: CELOS® with Siemens 840D sl Operate and ShopTurn 3G Control & Operation - CELOS® with Siemens 840D solutionline Operate including 21.5" ERGOline® Control with multi-touch display - APPs for simplified machine operation - Comprehensive management, documentation, and visualization of order, process, and machine data - Networking with CAD/CAM and compatibility with PPS/ERP Enhanced Equipment - Tool chain magazine: 120 positions (instead of 36-position disc magazine) - Tool interface: HSK-A 63 DIN 69893 - Mechanical oil mist separator - Capacity: 1,100 m³/h, filter class H13 - 4-color signal lamp - "BLACK" design variant - Work area door, front panel, and front window frame in deep black - Tropical package for ambient temperatures up to 40 °C - Includes control cabinet cooling unit - Energy measuring device - 3D data model of machining area (STEP & IGES) – supplied on CD - Electrical Profibus interface for 6-axis robot - (Only with Siemens control) Special Equipment / Options Dcedpfxsy A Hq Io Aqvjp - Grinding preparation (using CBN cup tools), consisting of: - Shortened grease lubrication cycle - Plug sealing in draw tube - Flushing of Z1/X1 telescopes during machining - HT 2 control hand unit - Jog mode, creep mode, and incremental adjustment via handwheel - Integrated emergency stop function and feed override - Tailstock with increased feed force (20 kN) Hydraulically actuated double-piston chuck Forkardt OZRDI 150, consisting of: - Integrated pressure converter - Piston rod clamping - Stroke monitoring unit with switching cone for clamping piston Ø150 mm - Maintenance-free 5-channel oil supply - Safety valve system for clamping piston Ø150 mm Condition The machine has been regularly serviced by DMG Mori customer service and is in technically flawless condition. An inspection under power or during ongoing production is possible. Dimensions & Weight - Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg - Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg - Total weight including accessories: approx. 22,605 kg - Number of packages: 11 - Loading meters: approx. 21 The complete equipment and further technical data are available in the documentation, which we are happy to provide upon request. Disassembly, removal, shipping, and recommissioning can be organized.

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z: 500 x 450 x 400mm, Table size 500 x 630mm, C axis 360, B Axis -5 / +110°, maximum workpiece diameter 630mm, maximum workpiece height 550mm table load 200kgs, Spindle taper BT40, Dcodjz R Nv Hopfx Aqvop 19kW Spindle Motor, Spindle Speed 12,000rpm, Heidenhain Control, 30 Station ATC, spindle probe, Swarf conveyor, through spindle coolant

Condition: excellent (used), Year of construction: 2019, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, table load: 1,000 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK- 63A, number of slots in tool magazine: 60, tool length: 420 mm, Universal Machining Center Dsdpj Agr Igsfx Aqvjcp Manufacturer: DMG MORI Type: DMU 95 monoBlock Year of manufacture: 2019 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 950 mm Y-axis: 850 mm Z-axis: 650 mm C-axis rotation range: 360° A-axis swivel range: +/- 120° Main spindle: Tool holder: HSK-63A Main spindle speed range: 20,000 rpm Main spindle drive power (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: C-axis Ø 850 x 750 mm integrated into Fixed table 1,000 mm x 750 mm Max. table load: 1,000 kg Max. workpiece dimensions: Ø 1,040 mm (clamping capacity) / Ø 850 mm (machining capacity) Height 590 mm Tool changer: Number of tool pockets: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 420 mm Max. tool weight: 8 kg Chip-to-chip time: 5.9 s Feed rates: Rapid traverse (X/Y/Z): 40 m/min Feed rate (X/Y/Z): 40,000 mm/min Technical features & accessories: - Tool changing system with double gripper - MPC Machine Protection Control - Production package: Chip conveyor with coolant unit 600 l / 160 Gallons, Paper belt filter Internal coolant supply, 40 bar / 23 l/min, through-spindle (AD) External coolant supply, 4 bar – 40 l/min (theoretical pump capacity) Chip flushing in the cabin door (not a standard coolant unit) - Spray gun 3 bar – 40 l/min - Oil and emulsion mist separator, mechanical filter, throughput 600 m³/h - Renishaw PP60 optical infrared probe (OMP 60) (if present) - Blum laser, tool measurement in the machining area - 3D quickSET preparation - Electronic handwheel (if present) Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.