CNC Coordinate Measuring Machine

Mitutoyo Crysta-Apex

Condition: ready for operation (used), Year of construction: 2005, X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (max. 520mm/s), joystick rapid traverse: max. 80mm/s, slow: 0.05mm/s, measuring speed: 1-8mm/s (CNC), acceleration: 0.13g (max. 0.23g), measuring table material: granite, table dimensions: 638x860mm, compressed air consumption: approx. 50l/min at 0.4MPa, length: 1122mm, width: 1082mm, height: 2185mm, weight (incl. table and control): 515kg. An on-site inspection is possible. Iodpfx Aey Duq Esatoif

Condition: used, Year of construction: 2022, surface area 1321 x 610 mm max. table load 1800 kg travel -x axis 1270 mm travel -y axis 508 mm travel -z axis 508 mm spindle cone SK40 number of spindle speeds 12000 U/min spindle capacity 15 kW spindle torque max. 82 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 21 kW weight of the machine ca. 4,25 t dimensions of the machine ca. 4,1 x 3,35 x 2,6 m the machine is like new!!!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm Iodpfxjza Hqus Aatoif - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: ready for operation (used), Year of construction: 2012, A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible. Iiedpfxox Ih A No Aatjf

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Mitutoyo coordinate measuring machine, type Crysta Apex S544 Multi-sensor cabling (analog scanning) Temperature compensation for all axes Measuring range, X-axis = 500mm Measuring range, Y-axis = 400mm Measuring range, Z-axis = 400mm Measurement uncertainty = 1.7 + 3L/1000 (µm) Mitutoyo controller UC200H Renishaw probe head PH6M Renishaw sensor SP25M Renishaw module SM25-1 Measuring software MCosmos-1 v.4.x PC system WIN10 and 27" monitor (new) Reference sphere / calibration sphere (new) Hardware & software upgrades available upon request Iijdpfx Aezhumfoatof Delivery & other services available upon request

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Isdjy Nyzgopfx Aateif Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Mitutoyo coordinate measuring machine, type Crysta Apex C544 Temperature compensation for all axes Measuring range, X-axis = 500mm Measuring range, Y-axis = 400mm Measuring range, Z-axis = 400mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Mitutoyo controller UC200 Mitutoyo joystick box, type M Renishaw probe head PH6M Renishaw probe head PH10M (optional) Renishaw sensor TP200 Renishaw TP200 measuring modules (6x) Renishaw SCR200 probe rack Measuring software MCosmos-1 v.4.x PC system WIN10 and 27" monitor (new) Reference sphere / calibration sphere (new) Delivery: On request Installation: On request Calibration: On request Training: On request Software upgrade: On request Software options: On request Measuring room design: On request On-site consultation: On request Rental: Possible Iiodozt Tg Ujpfx Aatef Leasing / hire purchase: Possible

Condition: used, Three Dimension Coordinate Measuring Machine MITUTOYO Crysta-Apex S574 Isdpfxoy Ufkks Aateif

Condition: used, Year of construction: 2019, functionality: fully functional, turning length: 1,550 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, type of input current: three-phase, overall weight: 19,650 kg, Equipment: rotational speed infinitely variable, We offer this used DMG MORI NTX2500/1500SZ NTX2500-1500 SZ with full options and cycles, year of manufacture 2019. Machine type: NTX2500/1500SZ Serial number: NTX25181202 Year of manufacture: 2019 Factory ID: 1 Catalog number (Diagram No.): NTX25181202 Weight: 19,650 kg Iijdpfoy H D H Ujx Aatof Rated power: 93 kVA Current at full load: 269 A Main fuse: 350 A Phase: 3 Frequency: 50 Hz AC voltage: 400 V DC voltage: 24 V Supply voltage: 200 ±10 V Short-circuit current: 5 kA Maximum motor current: 113 A If you have any questions or require further information, please contact us by message or phone.

Condition: good (used), Year of construction: 2017, Machine is in good working conditions. Parts shown by hand not come. Iiedpfjzlalhox Aatef Technical data are on pictures.

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm Iiodpfx Aaezbc Hhjtjf max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements. Isdspyg N Aopfx Aatoif

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 Ijdpfx Aoy R A Apoatsif year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: like new (used), Year of construction: 2011, measuring range X-axis: 505 mm, measuring range Y-axis: 705 mm, measuring range Z-axis: 405 mm, Mitutoyo CMM Crysta Apex C574 Measuring Range X – axis 505 mm Iijdozilyrspfx Aatof Y – axis 705 mm Z – axis 405 mm Accuracy acc. ISO 10360 E = [1,7 + 3,0L/1000] µm at temperature range 18 … 22 °C max. workpiece height 445 mm wax. workpiece weight 180 kg base material granit dimension measuring table 638 x 1160 mm fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0001 µm DCC Controller Mitutoyo UC200 DC motors all axis Guideways air bearings Tilt&swivel head Renishaw PH10M/PHC10-2 Probesystem Renishaw SP25M/SM25-1 Probe Changer FCR25 3x Computer Workstation (Windows 10) Software MCOSMOS-1 V4.2

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Power: 78 kW Ratio: 44,16:1 Isdpog Stz Aofx Aatsif RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm

Condition: used, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Mitutoyo coordinate measuring machine type Crysta Apex C776 Temperature compensation on all axes Measuring range X-axis = 700 mm Measuring range Y-axis = 700 mm Measuring range Z-axis = 600 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw probe head PH10MQ Renishaw change rack SCR200 Renishaw sensor TP200 Renishaw TP200 modules = 6 pcs Measuring software MCosmos Iiedpfx Aewhfh Aeatef PC system WIN10, 27" monitor Reference sphere / calibration sphere Software upgrade optional Hardware upgrade optional Full service upon request