Angular Clamping Device

WMW

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Fsdpjxcbpiefx Afnjfu Good condition

Year of construction: 1990, condition: excellent (used), used T-slot clamping angle Technical data: Dimensions height 1120 mm width 320 mm Groove width 20 mm with - 7 horizontal T-slots used, in good condition Ffjdsgwxmxjpfx Afnju

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Ffsdpfxsxf Uytj Afnju Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Cylindrical Grinder. VEB SA 200x800, Használt gép Ffedpfx Afoxx Sixensu Manufacturer: VEB, WMW Werkzeugmaschinen GmbH Model: SA 200x800 Overall Dimensions: 3070 x 1480 x 650 mm Year: 1960 Weight: 4.1 t Grinding Wheel Diameter: 400 x 15 mm Center Distance: 800 mm Table Size: 1000 x 200 mm Electrical Data: 380 V; 15 A; 6 kW

Condition: used, length 1000 mm width 570 mm height 1200 mm weight of the machine ca. 0,4 t dimensions of the machine ca. 1,x0,6x1,2 m Ffedpfxoh Ig Tpj Afnou used angle plate in good condition with several bores for clamping.

Condition: ready for operation (used), Year of construction: 1971, turning diameter over bed 800 mm turning diameter over slide rest 480 mm turning length 3000 mm turning diameter in the slot 850 mm center height over bed 380 mm bed width 550 mm spindle head DIN 55022/8 spindle bore 73 mm speeds 18 - 900 U/min feeds 224 / 0,018-10 mm/U thread - mm pitch ca. 84: 0,2 - 224 mm total power requirement 17,5 kW weight of the machine ca. 8,6 t dimensions of the machine ca. 5,5 x 1,8 x 1,72 m Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the motor speed), single-lever control for all support movements, pre-selected feed rates, hardened bed guides, double-tiebar bed for high rigidity, high- positioned front guideway and low-positioned rear guideway in the V-prism for Fedpfxjwwatrj Afnofu high accuracy, and triple bearings for the lathe spindle, threads in mm, inches and diametrical pitch. The year of manufacture is estimated. Many accessories! Machine dealer with own stock of 1600 m².

Condition: used, Price: On request Drilling machine, horizontal boring machine  Model: Conventional Manufacturer: WMW Union Type: BFT 90/3-2 Including rotating table Including digital readout Including multiple belongings X-Z travel: 1600x1000 Y-travel (up-down): 1050mm W-travel: 710mm Spindlemotor: 11kW Spindle diameter: 90mm Spindlespeed: 8-1600 rpm Table: 1000x1120mm Machine-weight: 9000kg Fsdpfx Afjwnhi Aenjfu - Documentation available: No - CE certificate present: No - Serial number: 90/3-2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, length 800 mm Ffedpfstv Icujx Afneu width 500 mm height 1000 mm weight of the machine ca. 1,1 t 2 units - Weight approx. 550 kg/each

Condition: used, Technical details: table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad Ffedpfju N D Aysx Afnju weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *

Condition: used, Technical details: floor-plate length: 640 mm plate width: 330 mm Ffedpfxou R A A Us Afneu Plate thickness: 65 mm

Condition: used, Year of construction: 2005, x-travel 700 mm y-travel 630 mm z-travel 700 mm Control SIN 840 D SIEMENS spindle turning speed - stepless 10.000 U/min power capacity at 100 % load 13,00 kW feeding force at 40 % ED 18,00 KW Ffjdpfx Afowhqtqoneu tool taper HSK-A63 spindle diameter in front bearing 80 mm feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min feed capacity X/Y/Z 5,00 kN B - axis 360 x 1 ° B-axis 30,00 U/min size of pallet 2x 500 x 500 mm workpiece weight 500 kg 0 700 x 700 x 750 mm tool magacine with 40 Plätzen tool length - max. 350 mm tool diameter 80 mm tool diameter with 2 vacant positions 150 mm weight of tools max. 10,00 kg Chip to chip time 4,00 sec. total power requirement 24,00 kW weight of the machine ca. 15,00 t dimensions of the machine ca. 4,00 x 4,00 x H3,00 m Horizontal machining center with SIEMENS SIN840D (PCU50); chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min;

Condition: good (used), Year of construction: 1986, Inner diameter: 20…400 mm Grinding depth: 315 mm Internal grinding spindle speeds, stepless: 2,640…16,500 rpm Workpiece spindle speed: 40…400 rpm Table feed rate: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Total power requirement: 16 kW Machine weight approx.: 5.8 t Additional information: Grindable diameter within workpiece guard: internal 20…400 mm; external 500 mm Max. workpiece diameter in workpiece guard: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2,640…16,500 rpm Drive power for face grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40…400 rpm Table speed: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Ffjdjyibygspfx Afneu Max. distance from workpiece spindle flange to grinding spindle carrier: 1,250 mm

Condition: used, Year of construction: 1985, Technical details: Ffodsu Nfvbepfx Afneu Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm passage opening in table: Ø 100 mm ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) *

Condition: used, Technical details: Pressure: 2,5 t Ffsdpfxeu Nfv Us Afneu throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *