Pillar Drilling Machine

WMW - GOTHA BS 16 BI

Condition: repair required (used), Machine number: 1464 Itedpod Hl Stjfx Aa Ejr TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: used, Year of construction: 2022, operating hours: 1,990 h, * Komatsu PC 88 MR-11E0 * Year of manufacture: 2022 * 1990 operating hours * 8720 kg * 50.7 kW engine * Adjustable boom * Steel tracks with rubber pads * Blade support Itedpsxhaxgofx Aa Esr * Hydraulic Powertilt quick coupler MS08 * Air conditioning * 180-degree camera * All hydraulic lines * 3 buckets: 200 cm, 80 cm, 40 cm

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm Iodpfx Aajdkx Ans Ejtr - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V 220 V connected load 2,6 kVA rated current 6,1 A Isdpfjrxg S Tex Aa Ejtr weight of the machine ca. 1 t

Condition: good (used), Year of construction: 1983, machine/vehicle number: 5763, Offer 24590 Technical data: - Drilling capacity 22 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm Itodpfxsvxg Rue Aa Ejr - 4 drill spindle speeds 355 – 710 – 1400 - 2800 rpm - Throat depth 210 mm - Machine table 480 x 420 mm - Min. / max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm Isdpfx Asrwmbgja Estr - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: new, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Iedpfx Aasi D Ddie Eetr Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg Isdpfx Aajcghg Ue Ejtr

Condition: used, Technical details: x-travel: 500 mm y-travel: 380 mm z-travel: 330 mm control: Siemens 840 D / 810 D spindle cone ISO: vertikal/horizontal: 40 table surface area: 400x800 fest mm spindle turning speed - continuous: verikal/horizontal: 35-1800 U/min spindle head swivable left - right: 90 ° rapid traverse X,Y: 3,15 mm/min. rapid traverse Z-axis: 1,6 m/min feed continuous: X/Y/Z: 6,3 - 1250 Total power requirement: 7,4 kW Weight approx.: 1,8 t dimension machine xH: 1,8 x 2,2 x 1,8 m dimensions electric cabinet LxWxH: 0,5 x 0,85 x 2,1 m Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: - various collet sleeves - div. SK 40 tapers - various milling arbors i.D. Itodju Nc R Nspfx Aa Eer *

Condition: good (used), Year of construction: 1985, machine/vehicle number: 16924, Offer 22090 Technical data: - Drilling capacity in steel ST 60 20 mm - Drill spindle holder MK 2 Itsdpotz T Dvjfx Aa Ejr - Drill spindle stroke 120 mm - 4 drill spindle speeds 400 - 2000 rpm - throat depth 250 mm - Max. distance table - drill spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm